Pyle PDA22BT Handleiding

Pyle Receiver PDA22BT

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PDA22BT (6 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Desktop Wireless BT Audio Amplifier
PDA22BT
Compact Mini Blue Series Stereo Power Amplier
(2 x 100 Watt MAX)
www.PyleUSA.com
2
Read through this user manual before using the product to ensure
its correct use. Keep this manual for future reference.
Quick Setup:
Front Panel
Rear Panel
1. Main Power ON Switch: Switch ON/OFF the amplier by using this switch.
2. Adjust to boost or cut HIGH frequencies.TREBLE KNOB:
3. Adjust to boost or cut LOW frequenciesBASS KNOB:
4. Master Volume: Adjusts main audio system volume level.
5. RED--AUX input modelInput LED:
Green--Wireless BT input model.
6. Lets you connect the desired LINE input source.RCA L/R LINE Input:
7. Banana Type Speaker L/R Terminals: Lets you easily connect speaker wires
directly to the Amplifer.
8. Connect the adaptor DC.POWER In Jack:
9. Wireless BT Antenna: Wireless BT Streaming receiver
1 5 2 3 4
6 7 8
9
www.PyleUSA.com
3
Setup and pairing (Wireless BT ampliers) are really easy. The following
instructions will help you connect Audio Ampliers to your music system or
pair with your tablet, computer, or smartphone.
1. Connecting the Speaker Wire
Audio stereo power ampliers that will power one pair of passive speakers
between 4 and 8 ohms (or subwoofer if you got the 2.1 CH amp or subwoofer
amp). To connect the amplier to your speakers you will need 2-conductor
stranded speaker wire. The ampliers use high-quality binding posts that will
accept heavy gauge bare wire banana plugs, spade lugs, or pin terminators.
If you use your own speaker wire we recommend using at least 16 gauge wire
and using the same length of wire from the amplier to each speaker It's also a
good idea to turn o your amplier before connecting power, audio sources or
speakers.
Preparing the Speaker Wire
1. Separate the last 3" of each speaker wire conductor.
2. Strip 1/2" of insulation from the end of each wire.
3. Twist the exposed copper strands with your ngers 3 or 4 times so the strands
stay together.
NOTE:
As you make your connections, be sure to connect the positive (+) terminals on
your amplier to the positive (+) terminals on your speakers. Even if your wire does
not have (+) or (-) markings, most 2-conductor speaker wire has printing on one
side to help you dierentiate between the wire pairs.
If you are Using Bare Wire
1. Use your thumb and nger to unscrew the binding post connectors on the back
of each speaker.
2. Insert each speaker wire into the holes on the side of the binding post connectors,
observing proper polarity.
3. Retighten the binding posts with your ngers.
4. The stripped portion of the wire should be secured rmly in each connector.
5. Make sure that none of the speaker wire strands have come in contact with an
adjoining terminal.


Product specificaties

Merk: Pyle
Categorie: Receiver
Model: PDA22BT

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PDA22BT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Pyle

Pyle

Pyle Pro PTAU23 Handleiding

23 Augustus 2024
Pyle

Pyle PLAM2001D Handleiding

24 Februari 2024
Pyle

Pyle PT1100 Handleiding

24 Februari 2024
Pyle

Pyle PFA100 Handleiding

24 Februari 2024
Pyle

Pyle PDA35BT Handleiding

24 Februari 2024
Pyle

Pyle PHDA6BT Handleiding

18 December 2023
Pyle

Pyle PDA77BU Handleiding

18 December 2023
Pyle

Pyle PT865BT Handleiding

13 December 2023

Handleiding Receiver

Nieuwste handleidingen voor Receiver