PureLink CSW110 Handleiding

PureLink AV extender CSW110

Lees hieronder de 📖 handleiding in het Nederlandse voor PureLink CSW110 (20 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

CSW110 User Manual | Benutzerhandbuch

-2-

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry spaces. Do not

expose the components to rain or moisture. Do not use the product close to a bath, swimming

pool etc.

• Do not expose the components of your sytems to extremely high temperatures or bright light

sources.

• In case of improper usage or if you have altered and repaired the product yourself, all guarantees

expire. PureLink does not accept responsibility in the case of improper usage of the product or

when the product is used for purposes other than specied. PureLink does not accept responsibility

for additional damage other than covered by the legal product responsibility.

• This product is not a toy. Keep out of reach of children.

• Do not open the product: the device may contain live parts. The product should only be repaired or

serviced by a qualied expert.

• Only connect the adapter to the mains after checking whether the mains voltage is the same as the

values on the identication tags. Never connect an adapter or power cord when it is damaged. In

that case, contact your supplier.

1. INTRODUCTION

Congratulations on your purchase of the PureLink CSW110, which allows you to send a connected HD

signal wirelessly to your HDTV or HD projector.

Examples of HD devices: Blu-ray players, HD set-top boxes, PlayStation4, XboxOne, etc. The CSW110

supports FullHD resolutions up to 1080p and all 3D formats. The inbuilt loop-through function

(HDMI out) of the transmitter means that you can watch the same content on the 1st as on the 2nd

HDTV or the HD projector (via receiver). The inbuilt infrared extender function allows you to operate

HD equipment using your own remote control, even if it is kept in a closed cabinet!

PureLink products are manufactured with the utmost precision and of top quality. Please read this

manual carefully and follow the instructions in order to get the very results from this product.

2. PACKAGE CONTENT

1x PureLink CSW110 Transmitter (TX)

1x PureLink CSW110 Receiver (RX)

1x IR Receiver

1x IR Emitter

2x Power adapter 5V1A (Micro USB)

1x Manual

1x Screw Set

1x Wall Mount

-3- ENGLISH

3. CONNECTION

Step 1:

Use an HDMI cable to connect the HDMI IN of the CSW110 transmitter with a source device. You can

use another HDMI cable to connect the HDMI OUT to a display (Loop-Through).

Step 2:

Use an HDMI cable to connect the HDMI OUT of CSW110 receiver to a display device.

Step 3:

(Skip this step if you don‘t need IR Extension) Connect the IR emitter to the CSW110 transmitter. Then

place the emitter in front of the source device’s IR receiver. Connect the IR receiver to the CSW110

receiver. Then place the receiver probe in place, accessible for your remote control.

Step 4:

Connect a DC 5V1A power adapter to the power jack (MicroUSB) of the CSW110 transmitter.

Step 5:

Connect the other DC 5V1A power adapter to the power jack (MicroUSB) of the CSW110 receiver.

Step 6:

To pair receiver and transmitter, press the MODE key on the receiver‘s box and then press the MODE

key on the transmitter.

Product specificaties

Merk:	PureLink
Categorie:	AV extender
Model:	CSW110
Kleur van het product:	Zwart, zilver
Soort:	AV-zender & ontvanger
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Stroom:	1 A
USB-connectortype:	Micro-USB
Ondersteunde video-modi:	480p, 576p, 720p, 1080i, 1080p
Maximum resolutie:	1920 x 1080 Pixels
Meegeleverde kabels:	Micro-USB
Aantal USB-aansluitingen:	1
HDCP:	Ja
Maximale refresh snelheid:	60 Hz
Aansluiting voor netstroomadapter:	Ja
3D:	Ja
Materiaal:	Kunststof
Remote (IR) ingang:	1
Frequentie:	5000 MHz
Compatibele producten:	CE, WEEE
Remote (IR) uitgang:	1
HDMI in:	1
Montagebeugels meegeleverd:	Ja
Aantal HDMI-uitgangen:	1
Receiver afmetingen (B x D x H):	83 x 84.9 x 13.5 mm
Operating voltage:	5 V
Maximaal bereik:	30 m
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Transmitter afmetingen (WxDxH):	83 x 84.9 x 13.5 mm
HDCP- & EDID-omzeiling:	Ja
Inclusief IR-versterker:	Ja
Inclusief IR-ontvanger:	Ja