PSC RF Multi SMA Handleiding

PSC Microfoon RF Multi SMA

Lees hieronder de đź“– handleiding in het Nederlandse voor PSC RF Multi SMA (3 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
PSC RF Mul SMA
The PSC RF Mul SMA contains two, separate, acve 1 x 8 RF spliers for use with up to eight
diversity receivers. This compact, rugged device was developed using the latest super low
noise RF ampliî…Źers and will operate over an extended frequency range of 470Mhz to 870Mhz.
Its two inputs are tradional BNC connectors for ease of use in interfacing with your external
antennas. Each of the SMA outputs oers a typical isolaon factor of 24 to 28dB between
radio receivers. The PSC RF Mul SMA also has the ability to power external powered
antennas or remote line ampliî…Źers. There are two top panel mounted switches on the unit.
One is marked “POWER” and this controls the overall power to the unit. The second switch
is marked “ANTENNA” and this switch controls the power being sent to an external powered
antenna or remote line amplier. Both switch light up when in use. The enre unit is es
powered from any source of external DC power of 10 to 15Vdc @ approximately 90 mA.
USE:
1. Connect a source of external 12Vdc power to the Hirose 4 pin connector on the
boom of the unit.
2. Connect your two receive ant nas to the RF input BNC connectors on the top of the en
unit. When using powered antennas or remote line ampliers, turn on the “Antenna”
power switch. For all other uses, leave this switch turned oî…’.
3. Connect the PSC RF Mul SMA to your receivers using the appropriate cables from the
SMA connectors on the RF Mul SMA to the RF antenna connectors on your receivers.
4. Power up the unit. Note that the power switch lights up green when the unit is turned
on.
*NOTE* When used with ENG “bag” mixing setups, we recommend that you remotely
mount your receive antennas up away from your equipment on your bag’s shoulder
straps.
SPECIFIACTIONS:
Size: 4.275” x 1.385” x 1.625” (108mm x 35mm x 41mm)
Weight: 6.5oz (185gm)
Powe External DC, 10-15Vdc @ 70 r: mA
Input Impedance: 50 Ohms
Output Impedance: 50 Ohms
Maximum Input Signal: +13dB
Noise Figure: 0.8dB
Chassis Material: Aircraî…ł Aluminum
Finish: Black Epoxy Power Coat
Warranty: 1 Year, limited
DECLARATION OF CONFORMITY
EMC: This product is in compliance with the Electromagnetic
Compatibility Directive, 89/336/EEC as defined in EN 50081-1,
EN55022 and EN 50082-1. IEC801-2, IEC801-3 and IEC801- 4.
LVD: This product is in compliance with the requirements of the
Low Voltage Directive, 73/23/EEC. 93/68/EEC as dened in
EN60065, 1993 and/or EN60950/A1/A2/A3: 1995
TRADE NAME: PSC
MODEL: RF Multi SMA
RESPONSIBLE PARTY: Professional Sound Corp.
28085 Smyth Drive
Valencia, CA 91355 USA
CONTACT PERSON: Ronald Meyer
(661) 295- 9395
TYPE OF PRODUCT: Antenna Distribution
MANUFACTURER: Professional Sound Corp.
28085 Smyth Drive
Valencia, CA 91355 USA
We hereby declare that the equipment bearing the trade name and model number listed
above has been tested in accordance with the requirements contained in the above listed
directives. All necessary steps have been taken and are in force to assure that
production units manufactured will conform to Directive guidelines.
December 2011 Professional Sound Corporation.
Professional Sound Corporaon 28085 Smyth Drive, Valencia, CA 91355
PH (661) 295-9395 Fax (661) 295-8392 email sales@professionalsound.com


Product specificaties

Merk: PSC
Categorie: Microfoon
Model: RF Multi SMA

Heb je hulp nodig?

Als je hulp nodig hebt met PSC RF Multi SMA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon PSC

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon