PSB SubSeries BP8 Handleiding

PSB Speaker SubSeries BP8

Lees hieronder de 📖 handleiding in het Nederlandse voor PSB SubSeries BP8 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

SubSeries BP8

OWNER’S GUIDE

www.psbspeakers.com

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instruction s.

2. Keep these instruction s.

3. Heed all warning s.

4. Follow all instruction s.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instruction s.

8. Do not install near any heat sources such as radiator heat s,

produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not ﬁt

into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plug convenience receptacle and the point s, s,

where they exit from the apparatu s.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer, or sold with the

apparatu When a cart is used, use caution when s.

moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of tim e.

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatu the apparatus s,

has been exposed to rain or moistur does not operate e,

normally, or has been dropped.

15. The apparatus shall not be exposed to dripping or splashing

and that no objects ﬁlled with liquids, such as vase shall be s,

placed on the apparatus.

16. WARNING: To reduce the risk of ﬁre or electric shock, this

apparatus should not be exposed to rain or moistur e.

17. The mains plug or an appliance coupler is used as the

disconnect devic the disconnect device shall remain readily e,

operable.

The lightning ﬂash with arrowhead symbol within an

equilateral triangl is intended to alert you to the e,

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufﬁcient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle

is intended to alert you to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

FCC WARNINGS

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interferenc and (2) this device must accept e,

any interference received, including interference that may cause

undesired operation.

Any changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rule These limits are designed to provide reasonable protection s.

against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communication However, s.

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the

radiator & your body.

IC WARNING

This radio transmitter has been approved by Industry Canada.

This Class B digital apparatus complies with Canadian standard

ICES-003. This device complies with Industry Canada License

exempt RSS standard(s). Operation is subject to the following two

conditions.

(1) This device may not cause interference and

(2) this device must accept any interference, including

interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set

forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the

radiator & your body.

FCC STATEMENT

NOTES ON ENVIRONMENTAL PROTECTION

At the end of its useful lif this product must not be disposed of with regular household waste but must be returned to ae,

collection point for the recycling of electrical and electronic equipment. The symbol on th product, user’s manual and packaging,

point this out.

The materials can be reused in accordance with their markings. Through re-use, recycling of raw materials, or other forms of recycling of old products,

you are making an important contribution to the protaction of our enviroment.

Your local administrative ofce can advise you of the responsible waste disposal point.

Introduction

PSB subwoofers are designed to provide the attest possible frequency response, full bass extension, low distortion and high output. Beyond these characteristics

there are a few other parameters that we feel are very important in the design of a subwoofer. First and foremost, a PSB subwoofer must be musical. A

subwoofer should also have the ability to play musically even when overloaded or stressed. For this reason PSB subwoofers incorporate limiting circuitry

preventing audible overload while remaining true to the dynamics of the music. This circuitry combines peak limiting circuits that hold amplier signal swing to

the point just short of the amplier’s clipping, with compression circuitry that will reduce the amplier’s gain.

Managing heat dissipation is challenging with today’s greater power demands. Where suitable, PSB subwoofers use the latest implementation of direct digital

power amplication, that maintains maximum efciency and low THD under all conditions.

PSB woofers are always designed to reduce mechanical noise and prevent harsh sounds at the excursion extremes. Cabinets and ampliers are designed to

prevent air leaks, which can contribute minute amounts of noise. All of our designs are exhaustively tested to survive 15 continuous hours of being driven to

maximum output.

We hope that our attention to detail results in countless hours of pleasant entertainment. Please take the time to read the following sections about the placement

of your subwoofer, its connections and adjustments. Enjoy.

Contents

Note: The carpet disks are specially designed for placement under each of the subwoofer’s feet if resting on deep pile carpet or very thick area rugs.