ProMediaGear TR344L Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor ProMediaGear TR344L (4 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
PRO-STIX
(34mm Series)
Carbon Fiber Tripod
Instruction Manual
TR343 / TR343L / TR344 / TR344L
Our ProMediaGear Pro-Stix, β€œ34mm Series” Tripods, are made with 10x Layer carbon ber,
hard anodized 6061-T6 Aluminum, and Stainless Steel components. Made in the USA.
MOUNTING STUD
3/8-16 Mounting Stud securely attaches to tripod head.
SPIRIT LEVEL
Bubble level incorporated into the Apex to level your tripod with ease on uneven terrain.
ANGLE STOP
3-Position stops with built-in nger push area that allows for quick leg adjustments for any
shooting situation.
APEX
A sturdy aluminum apex designed for additional accessories such as our 75mm Leveling Bowl.
The apex also features (3) 1/4-20 mounting holes for magic arms or other devices.
LEG
34mm, 10x layer carbon ber weave for the ultimate in strength, weight and stability.
Lightweight, vibration resistant tubes.
TWIST LOCKS
Machined aluminum locks with anti-slip grooves.
RUBBER MOLDED FEET W/ HARDENED STAINLESS STEEL SPIKE (included)
Soft non-marking rubber foot. Unscrew to reveal the hidden Stainless Steel Spike.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.a
7.b
Optional Accessories
SPECIFICATIONS
β€’ 34mm Diameter Legs β€’ 10x Layer Carbon Fiber β€’ CNC Machined Aluminum Apex
β€’ 3 Leg Locking Angle Positions β€’ 3 Stainless Steel Spikes (included)
β€’ Max Load: 60 lbs.
HEAD MOUNTING
To install a Ball Head, Video Head or Gimbal of your choice rst locate the 3/8-16 screw on the top of
the tripod plate. Next, match up your accessory and insert it over the screw. Tighten your accessory in
a clockwise fashion until it becomes snug. In some cases it may be necessary to lock your pan knob
then tighten a little more.
OPERATION
Before using your tripod, adjust each leg section to the desired length and angle setting.
Make sure the tripod is on a secure base and level surface and that all leg locks are securely
tightened before installing your camera onto the tripod.
NOTE: For added stability hang a weight or object from the middle hanger under the apex.
LEG ADJUSTMENTS
To accommodate uneven terrain, awkward shooting situations, or for low angle shooting the tripod
offers 3 adjustable leg angle adjustments. Each leg may be adjusted by pushing out the angle leg
lock on the apex. The lock is contoured to t your nger and allows for convenient adjustments.
Once the lock is released move the leg into the desired position and press back into position to
secure. Repeat on the other legs if desired.
LEG SECTION ADJUSTMENT
Aluminum leg collars with built-in anti-rotation sleeves can be found at the end of each leg segment.
To adjust the tripod leg height securely hold the tripod and in a counter-clockwise motion loosen the
collar. Extend the leg to the desired shooting position and tighten clockwise until tightened.
MOLDED RUBBER + HARDENED SPIKED FEET
The Pro-Stix β€œ34 Series” Tripods are equipped with a non-marring rubber foot that works great in any
leg lock position. When the terrain calls for it, inside each foot is a large hardened stainless steel
integrated spike. Remove the foot counter clock-wise to reveal the spike then remove the spike. A
hole is drilled into the spike to assist in loosening and tightening if necessary by sliding an allen key
or small item into the hole. Re-install on the other side of the foot.
TRB3475 - 75mm Tripod Bowl Insert
TRBU75 - 75mm Leveling Bowl
visit: www.ProMediaGear.com for more details
TR343 TR343L TR344 TR344L
Leg Sections 3 3 Long 4 4 Long
Max Height 50.90” in. / 130 cm 59.30” in. / 150 cm 59.30” in. / 150 cm 70.70” in. / 180 cm
Min. Height 3.80” in. / 9.70 cm 3.80” in. / 9.70 cm 3.80” in. / 9.70 cm 3.80” in. / 9.70 cm
Folded Length 22.10” in. / 56 cm 25.10” in. / 64 cm 20.80” in. / 53 cm 23.80” in. / 60 cm
Weight 3.70 lbs / 1678g 3.90 lbs / 1769g 4.00 lbs / 1850g 4.30 lbs / 1950g


Product specificaties

Merk: ProMediaGear
Categorie: Statief
Model: TR344L

Heb je hulp nodig?

Als je hulp nodig hebt met ProMediaGear TR344L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Statief ProMediaGear

Handleiding Statief

Nieuwste handleidingen voor Statief