Pro-User APB 100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pro-User APB 100 (40 pagina's) in de categorie Achteruitrijcamera. Deze handleiding was nuttig voor 117 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
1
WIRELESS SYSTEMREAR VIEW CAMERA
WITH MIRROR DISPLAY
KABELLOSES INNENSPIEGEL RÜCKFAHR-
KAMERA- SYSTEM
RECUL SANS FIL SYSTÈME DE CAMERA DE
DRAADLOOS CAMERASYSTEEM
W - ith built in 8,9cm / 3,5’’ monitor
mit integriertem 8,9cm / 3,5” Monitor
a vec écran 8,9cm / 3,5’’ pouces
met 8,9cm / 3,5’’ monitor
APB100
CE 0560
2
INTRODUCTION
The Pro back- User APB100 is member of the family of advanced car Rear view - up
systems manufactured by Pro User International Ltd.
The Pro-User Wireless Rear view Camera System, when used as described, will improve
your ability to see behind your car, camper, trailer, or mini van. We have taken -
numerous measures in quality control to ensure that your product arrives in top condition,
and will perform to your satisfaction.
Please carefully read and follow the following safety and operating instructions.
IMPORTANT SAFETY INSTRUCTIONS
Before You Install
If you are not confident working with 12 volt DC vehicle wiring, removing and reinstalling
interior panels, carpeting, dashboards or other components of your vehicle, contact the
vehicles manufacturer, or consider having the camera system professionally installed.
Interference
This device, as well as all other wireless devices, may be subject to interference.
Interference may be caused by cell phones, Bluetooth headsets, Wi-FI routers, power
lines and other various electrical equipment, etc.
Repair
The camera system should not be opened. Any attempt at modification or repair by the
user will entail the loss of your guarantee.
PARTS
1. Rear View Mirror 2. Camera with mounting plate
3. Transmitter Box 4. Mounting Accessories 5. M irror Power Cable with
cigarette plug
6. Transmitter Box Power Cable 7.Mirror mounting magic tape 8. Mirror power cable
3
INSTALLATION
These instructions do not apply to all vehicles. They are only meant as a general
guide due to the number of different makes & models. For vehicle specific
questions contact your vehicle’s manufacturer.
Camera installation
There are several ways to mount the camera on the back of your car. But the most
convenient is to mount it near the license plate of the car. Supplied is one mounting plate
that can be fixed behind the license plate, and the mounting plate have been installed in
the camera.
The camera is tiltable, camera angle can be adjusted manually on vertical direction. Make
sure that its field of view and detection are not obstructed.
At some type of cars it is not possible to mount the camera near the license plate. You
may have to find another spot at the back of your car to mount the camera.
1. Remove the rear license plate, and then loosen the license plate bolts/screws.
2. Position the supplied mounting plates (with camera together) behind the license plate
bracket. Secure both license plate bracket and mounting plates with the license plate
bracket bolts/screws.
3. Mount the license plate on the license plate bracket.


Product specificaties

Merk: Pro-User
Categorie: Achteruitrijcamera
Model: APB 100

Heb je hulp nodig?

Als je hulp nodig hebt met Pro-User APB 100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden