Pro-Ject CD Box DS2 Handleiding

Pro-Ject CD-spelers/recorder CD Box DS2

Lees hieronder de 📖 handleiding in het Nederlandse voor Pro-Ject CD Box DS2 (5 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

INSTRUCTIONS FOR USE

Pro-Ject CD Box DS2

Dear music lover,

thank you for purchasing a P -Ject Audio Systems CD player. ro

In order to achieve maximum performance and reliability you should study these instructions for use

carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

This product contains a laser diode To ensure continued safety, do not remove any covers or .

attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

If a disc is cracked, chipped, warped, or otherwise damaged, don't risk to play it. You could end up

damaging the unit. This player is designed for use with fully circular, full size CDs only. Use of

shaped discs is not recommended. The manufacturer and the distributor disclaims all liability arising

in connection with the use of damaged or shaped discs.

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that

the voltage in your area meets the voltage requirements printed on the power supply.

The power supply is used to disconnect the unit from the mains. Make sure that the power supply

is easily accessible at all times. Never handle the device, the power supply while your hands are

wet or damp.

Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,

such as a ﬂower vase on or near the device. Never spill any liquid on the device or the power

supply. Never place any naked ﬂame sources, such as lighted candles on or near the device. The

product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any

other similar conditions.

Make all connections whilst the CD player is disconnected from the power supply.

Never use any other power supply than the one supplied with the unit.

Connect the low voltage plug from the power supply to the socket of the unit Power 9V before

connecting the power supply to the mains. The unit can be switched on and oﬀ by using 2 diﬀerent

methods which are equal in priorities.

The pushbutton on the front panel of the unit alternately turns the power on or returns it to standby

mode. The blue LED on the front panel shows that the unit is powered on. If a trigger signal is present

the unit c an’t be switched off by the pushbutton.

The unit can be switched on via other Box Design components when a 12V trigger voltage is present at

the 2.5mm socket marked Special power- cables (polarity ) in diverse lengths Trigger Input. on

are available as accessories. The remote power-on signal can be relayed to further units via the Trigger

Output socket. When the 12V trigger signal is switched oﬀ, the unit will also switch oﬀ.

Trigger cables may only be plugged into the sockets when the unit is disconnected from the

power supply and from the mains. Failure to do so may result in damage of the unit.

Select to control the output level of the line level output using the remote control sets the level Var . Fix

to the maximum. A change is only possible when the unit is turned oﬀ – the switch has no function when

the unit is turned on.

Power turns the unit on/oﬀ

CD, Opto1 Opto2 Coax USB, , , selects the

input (alternatively left and right arrows select

inputs in turns)

Mute enable/disable mute function

EJECT ejects the disc

FILTER - selects ﬁlter - see chapter ﬁlter for

further info

Shuﬄe - activates random track play

Repeat - press the button repeatedly for

selecting repeat modes: repeat current track /

repeat for all tracks

Play/Pause/Stop/Next/Previous acts in the

same way as front panel buttons

If the switch on the backpanel is set to Var

then using the two blank buttons above and

below the button allows to control the “CD”

level of the line output.

Product specificaties

Merk:	Pro-Ject
Categorie:	CD-spelers/recorder
Model:	CD Box DS2

Heb je hulp nodig?

Als je hulp nodig hebt met Pro-Ject CD Box DS2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding CD-spelers/recorder Pro-Ject

Pro-Ject CD Box S Handleiding

21 April 2023

Pro-Ject CD Box DS2 T Handleiding

15 April 2023

Pro-Ject CD Box DS2 Handleiding

15 Maart 2023

Pro-Ject CD Box SE Handleiding

11 Maart 2023

Pro-Ject CD Box S2 Handleiding

1 Maart 2023

Pro-Ject CD Box DS2T Handleiding

22 Februari 2023

Pro-Ject CD Box DS Handleiding

10 November 2022

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder

S.M.S.L PL100 Handleiding

16 December 2024

Ruark Audio R-CD100 Handleiding

11 December 2024

Auna Stereosonic Handleiding

9 December 2024

Pioneer CD-SB10 Handleiding

7 December 2024

Taga Harmony TCD-50 Handleiding

20 November 2024

Marantz SA-17S1 Handleiding

15 November 2024

Klipsch PD-10AE Handleiding

13 November 2024

Rotel Michi Q5 Handleiding

3 November 2024

Reflexion PCD520MF Handleiding

29 September 2024

Auna Reference 802 Handleiding

24 September 2024