PreSonus PRM1 Handleiding

PreSonus Microfoon PRM1

Lees hieronder de 📖 handleiding in het Nederlandse voor PreSonus PRM1 (4 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 82 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

PRM1

RTA Measurement

Microphone

Owner’s Manual

7257 Florida Boulevard • Baton Rouge,

Louisiana 70806 USA • 1-225-216-7887

www.presonus.com

Introduction

Thank you for purchasing the PreSonus® PRM1

RTA Microphone. This omnidirectional microphone

has been designed to provide an accurate

reproduction of a room’s sound characteristics for

use with audio-analysis tools, such as real-time

analyzers and spectrographs. Delivering a ﬂat

frequency response from 20 Hz to 20 kHz and

featuring a ¼”, pre-polarized, electret condenser

capsule, the PRM1 is an excellent companion

to the Virtual StudioLive™ Smaart® System

Check Wizards and other analysis systems.

We appreciate the support you have shown

us through the purchase of this product.

Features

•¼”, pre-polarized, electret condenser capsule

•Flat frequency response from 20 Hz to 20 kHz

•Low noise, low distortion

•Ideally suited for system analysis

and measurement

•All-metal chassis

Precautions

•Mute audio system output prior to

connecting or disconnecting the PRM1 or

engaging/disengaging phantom power.

•When operating in outdoor

environments, cover capsule with foam

windscreen to reduce wind noise.

•Attach to a mic stand when analyzing sound

systems to ensure accurate measurements.

What’s in the Box

•PRM1 RTA Microphone

•PRM1 Hard Case

•PRM1 Shock Mount

•PRM1 Foam Windscreen

About This Microphone

The PRM1 is a condenser microphone with a

ﬂat frequency response and an omnidirectional

polar pattern. Let’s brieﬂy deﬁne these terms.

Condenser Microphones

Condenser microphones such as the PRM1

require a power source, which can be provided

by an external power supply or using phantom

power, which is usually provided by a mixer,

preampliﬁer, or direct box. Phantom power is

sent over the same mic cable that carries the

audio signal; the term derives from the fact

that there is no visible power cable, and the

voltage is not perceptible in the audio path.

PreSonus StudioLive-series mixers provide

phantom power to every mic input,

including the talkback input utilized by the

Smaart System Check Wizards in VSL.

Flat Frequency Response

A microphone with a ﬂat frequency response

captures all frequencies equally within its

speciﬁed response range, neither boosting

nor cutting frequencies, so it accurately

reproduces the incoming signal. While this

makes it ideal for measuring what a room or

speaker is doing to the outgoing signal in a

sound system, it is not necessarily the best

choice for recording speciﬁc instruments.

Omnidirectional

The PRM1 has an omnidirectional polar

pattern, meaning it is equally sensitive in all

directions. This allows the microphone to

measure reﬂections, as well as direct signals,

providing an accurate depiction of the room.

trademarks or registered trademarks of PreSonus Audio Electronics, Inc. Smaart is a registered

trademark of Rational Acoustics, Inc. Other product names mentioned herein may be

trademarks of their respective companies. All speciﬁcations subject to change without notice.

Part# 820-PRM0022-B

192 mm

[7.56”]

21 mm

[0.83”]

12.7 mm

[0.5”]

Dimensions

19 mm

[0.75”]

Mic Position and Room Analysis

Improper mic placement when analyzing a sound

system can result in the system appearing to

have problems that don’t actually exist. Below

is a quick reference for proper mic placement.

Primary Mic Position

This is the main reference point for a speaker and

can be used as a single, “representative” position.

Your goal in setting the primary mic position

is to ﬁnd a point that puts the microphone in

the center (on axis) of a speaker’s throw, within

the listening area. In other words, you want to

put the microphone smack dab in the middle

of where your speaker sounds its best.

Secondary Mic Position

Secondary mic positions provide your system

analysis with more information to get a more

“three-dimensional” view of your system.

These can be on- or oﬀ-axis measurements

of a speaker within the listening area. Avoid

using locations outside the core coverage

area of your system, or on the edges.

With any mic position, avoid creating

position-dependent anomalies.

Ground Bounce

Ground reﬂections, or “ground bounce,” become an

issue when a speaker is ﬂown and angled down.

The proper mic position, in this case, will also

catch the reﬂection of the signal oﬀ the ﬂoor.

Reﬂection

arrives

~4ms late...

In this case, you can choose from three options:

•Block the reﬂection with a baﬄe.

•Do a ground-plane measurement.

•Do a multi-point measurement to

randomize the eﬀect of the ﬂoor bounce.

Technical Speciﬁcations

Type Black electret condenser

Element Pressure, FET preamplifier

Polar Pattern Omnidirectional

Frequency Response 20 Hz to 20 kHz

Sensitivity (@ 1 kHz open-circuit voltage) -37 dB/Pa (14 mV/Pa)

1 Pa=94 dB SPL

Rated Impedance 200Ω

Minimum Load Impedance 1,000Ω

EIN (A-weighted) 26 dB

Max. SPL (1 kΩ load) 132 dB SPL (THD ≤ 1%, 1 kHz)

Dynamic Range (1 kΩ load) 106 dB

S/N Ratio 70 dB

Power 9-52V Phantom

Current Consumption 2 mA

Polarity Pin 2 output positive

voltage (relative to Pin 3)

when diaphragm receives

positive pressure (moves inward)

Connector 3 pin XLR Male

Finish Metal, matte black

Environmental Conditions 10-50˚ C, humidity 0-95%

Weight 150g (5.3 oz)

Dimensions (LxW) 7.56” x 0.83” (192 mm x 21 mm)

PreSonus Limited Warranty

1. PreSonus Audio Electronics Inc. warrants this product to be

free of defects in material and workmanship for a period

of one year from the date of original retail purchase.

2. This warranty is enforceable only by the original retail purchaser.

To be protected by this warranty, the purchaser should register the

product on line at www.presonus.com within 14 days of purchase.

3. For warranty information in all other countries except

the USA, please refer to your local distributor.

4. During the warranty period PreSonus shall, at its sole and

absolute option, either repair or replace, free of charge,

PRM1 headphones that prove to be defective on inspection

by PreSonus or its authorized service representative.

5. A warranty claim is deemed valid if:

a. Purchase of the product took place within the last

12 months (or extended period if required by law)

and purchased legitimately through a dealer.

b. The failure description and/or the visual appearance

do not indicate physical abuse by the customer and

the factory-applied serial number has not been altered

or removed or tampered with in any way.

6. The Limited Warranty does not cover :

a. Improper handling or neglect

b. Products returned without proof of purchase

c. Products where serial number, ID numbers

or logos have been tampered with

d. Products that have been modiﬁed from original design.

e. Damages incurred in transit, where the carrier

needs to be notiﬁed to handle the claim

f. Damages incurred by unauthorized repairs

g. Physical abuse

h. Natural disasters such as ﬁre, ﬂood, lightning, earthquake

i. Liquid contamination

j. Excessive high or low temperature or humidity

k. Inappropriate storage

l. Physically damaged connectors

m. Connection or operation of the unit in any way that

does not comply with the technical or safety regulations

applicable in the country where the product is used

n. Damages/defects caused by force majeure or any other condition

that is beyond the control of PreSonus Audio Electronics

7. To obtain warranty service, the purchaser must ﬁrst call or write

PreSonus at the address and telephone number printed ON

THE FRONT OF THIS MANUAL to obtain a Return Authorization

Number and instructions of where to return the unit for service. All

inquiries must be accompanied by a description of the problem.

8. All authorized returns must be sent to the PreSonus repair facility

postage prepaid, insured and properly packaged. PreSonus

reserves the right to update any unit returned for repair.

9. PreSonus reserves the right to change or improve the design of

the product at any time without prior notice. This warranty does

not cover claims for damage due to abuse, neglect, alteration,

or attempted repair by unauthorized personnel and is limited

to failures arising during normal use that are due to defects in

material or workmanship in the product. Any implied warranties,

including implied warranties of merchantability and ﬁtness for

a particular purpose, are limited in duration to the length of this

limited warranty. Some states do not allow limitations on how

long an implied warranty lasts, so the above limitation may not

apply to you. In no event will PreSonus be liable for incidental,

consequential, or other damages resulting from the breach of

any express or implied warranty, including, among other things,

damage to property, damage based on inconvenience or on loss of

use of the product, and, to the extent permitted by law, damages for

personal injury. Some states do not allow the exclusion of limitation

of incidental or consequential damages, so the above limitation

or exclusion may not apply to you. This warranty gives you speciﬁc

legal rights, and you may also have other rights, which vary from

state to state. This warranty only applies to products sold and used

in the United States of America. For warranty information in all

other countries except the USA, please refer to your local distributor.

EU Directives on the Protection of the Environment

RoHS This product is compliant with the EU Directive 2011/65/EU for the Restriction

of the use of Certain Hazardous Substances in Electrical and Electronic Equipment. No

lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr+6), PBB or PBDE

is intentionally added to this device. Any traces of impurities of these substances

contained in the parts are below the RoHS speciﬁed threshold levels.

REACh This product is compliant with the European Union Directive EC1907/206 for the

Registration, Evaluation, Authorization, and Restriction of chemicals (REACh) and contains none

or less than 0.1% of the chemicals listed as hazardous chemicals in the REACh regulation.

WEEE This symbol on the product or its packaging indicates that this product must

not be disposed of with other waste. Instead, it is your responsibility to dispose of your

waste equipment by handing it over to a designated collection point for the recycling

of waste electrical and electronic equipment. The separate collection and recycling

of your waste equipment at the time of disposal will help conserve natural resources

and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop oﬀ your waste equipment for recycling, please

contact your local city recycling oﬃce or the dealer from whom you purchased the product.

Product specificaties

Merk:	PreSonus
Categorie:	Microfoon
Model:	PRM1
Kleur van het product:	Zwart
Soort:	Microfoon voor podiumpresentaties
Connectiviteitstechnologie:	Bedraad
Aansluiting:	XLR-3
Signaal/ruis-verhouding:	70 dB
Microphone direction type:	Omnidirectioneel
Gevoeligheid microfoon:	-37 dB
Frequentie microfoon:	20 - 20000 Hz
Microphone input impedance:	200 Ohm
Gewicht microfoon:	150 g
Dynamisch bereik:	106 dB
Afmetingen microfoon (DxH):	21 x 192 mm