PrecisionPower Power Class P.12 Handleiding

PrecisionPower Subwoofer Power Class P.12

Lees hieronder de πŸ“– handleiding in het Nederlandse voor PrecisionPower Power Class P.12 (2 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
WWW.PRECISIONPOWER.COM
A
M
P
A
M
P
A
M
P
1 PC Subwoofer Wired to 4 1 PC Subwoofer Wired to 1 Ω Ω
A
M
P
2 PC Subwoofers Wired to 2 Ω
A
M
P
2 PC Subwoofers Wired to .5 Ω
3 PC Subwoofers Wired to 1.33 Ω
WWW.PRECISIONPOWER.COM
Thank you for choosing PrecisionPower
woofers. Designed and
engineered in the USA, this product combines innovative technol-
ogy with the finest materials to consistently deliver
Absolutely State
of the Art
β„’ performance, sound quality, reliability, and value. This
PrecisionPower
product reflects our commitment to offer you
unparalleled performance and quality for years of dependable ser-
vice and listening enjoyment.
Features, Parameters, & Dimensions
series wired PC.12 PC.15
Fs (Hz) 28.05 29.14
Qms 5.028 6.832
Vas (ftΒ³) 1.282 3.17
Cms (mm/N) 0.106 0.0977
Mms (g) 303.4 305.2
Rms (kg/s) 10.63 8.18
Xmax (mm) 15 15
Xmech (mm) 22.5 22.5
Piston Diameter (in) 9.842 12.6
Sd (inΒ²) 76.09 124.7
Qes 0.406 0.524
Re (Ω) 3.88 3.85
Z ( ) Ω 4 4
BL (Tm) 22.61 20.27
Rms Power (watts) 600 700
Qts 0.376 0.487
NO (%) 0.191 0.41
1w/1m SPL (dB) 84.8 88.1
2.8V SPL (dB) 88.1 91.45
Voice Coil Diameter (in) 2.5” 2.5”
Impedance (Ω) DVC 2Ω DVC 2Ω
M-vd (ft.3) 0.174 0.25
Non Pressed Paper Pulp Cone
Polyether Foam Surround
2.5” 4-layer VC on Aluminum Former
Nickel Plated 8ga. Compression Terminals
Dual Poly-Cotton Suspension Spiders
Die-Cast Aluminum Frame
170oz. Strontium Ferrite Magnet
Vented T-Yoke Back-plate
Cast Aluminum Heat-sink Dust-cap
WWW.PRECISIONPOWER.COM
Included in this manual are a number of different enclosure sugges-
tions. These are by no means the only enclosures to use, but they
provide a starting point to determine the correct enclosure for your
needs many factors must be addressed (amount of power, vehicle,
placement, crossovers, etc) Therefore, as always PrecisionPower
recommends that your subwoofer be installed by an authorized
PrecisionPower dealer.
Enclosure Dimensions
All enclosures should be made of .75” (3/4”) material only. When
possible, make the baffle 1.5” (1 Β½) thick and add .75” (3/4”) to the
depth of the enclosure to compensate. All volumes INCLUDE
INCLUDE
INCLUDE
INCLUDEINCLUDE vent/
port and subwoofer displacements. DO NOT
DO NOT
DO NOT
DO NOTDO NOT change the volume
unless you plan on adding a substantial amount of bracing. For
added performance, applying a coat of fiberglass resin to the interior
walls will greatly improve sealing the enclosure. Adding a thin layer
of poly-fill will improve response by smoothing out reflections
within the enclosure.
Enclosure Construction
Enclosure Recommendations
PC.12 Sealed PC.12 Ported
Vol.
(ft.3)
Dimensions
(H x L x D) QTC -3dB
(Hz)
Vol.
(ft.3)
Port
(dia. X L)
Freq.
(Hz)
-3dB
(Hz)
0.75 13.5x13.5x10.5 0.649 55.4 1.75 4” x 12” 39.5 33.3
1.00 13.5x17.5x10.5 0.580 56.9 2.25 4” x 12” 33.9 29.0
1.25 13.5x21.5x10.5 0.539 58.3 2.75 4" x 12" 30.3 26.3
PC.15 Sealed PC.15 Ported
Vol.
(ft.3)
Dimensions
(H x L x D) QTC -3dB
(Hz)
Vol.
(ft.3)
Port
(dia. X L)
Freq.
(Hz)
-3dB
(Hz)
1.50 17x16x13 54.9 45.0 3.50 (2) 4" x 12" 37.7 31.3
2.00 17x21x13 55 43.2 4.00 (2) 4" x 12" 34.9 29.1
2.50 17x25.75x13 55 42.8 4.50 (2) 4" x 12" 32.8 27.4
Dimensions
(H x L x D)
14x17.25x16.75
14x22x16.75
14x26.5x16.75
Dimensions
(H x L x D)
16x26.75x18
16x30.5x18
16x34x18


Product specificaties

Merk: PrecisionPower
Categorie: Subwoofer
Model: Power Class P.12

Heb je hulp nodig?

Als je hulp nodig hebt met PrecisionPower Power Class P.12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer PrecisionPower

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer