Power Dynamics 952.071 Handleiding
Power Dynamics
Versterker
952.071
Lees hieronder de š handleiding in het Nederlandse voor Power Dynamics 952.071 (36 pagina's) in de categorie Versterker. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/36
PDV Series 100V MP3 4 Zone Amplifier
Ref. nr.: 952.068, 952.071, 952.073
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSÅUGI
V1.1
2
ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5Ā°C/41Ā°F and
35Ā°C/95Ā°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
100V LINE SYSTEM
For 100V line systems, connect the amplifier to the first speaker in the system using double-insulated speaker wire which has
adequate current rating to handle the total output of the amplifier.
Connect the ā100Vā output terminal to the positive (+) connection of the speaker and āCOMā output to the negative (-)
connection of the speaker. Connect further speakers in parallel to the first speaker with all positive terminals and connected
together and all negative terminals connected together as shown below.
Examples
A 100V line speaker system can comprise of many speakers connected together. The determining factor for how many
speakers can be used on a single amplifier is the power rating. For most purposes, it is advised to connect as many speakers
as needed with a combined wattage of no more than 90% of the amplifierās output power rating.
The terminals of a 100V speaker are connected to a transformer and in some cases, this transformer may be ātappedā for
different power ratings. These tapings can be used to adjust the wattage (and output volume) of each speaker in the system to
help achieve the ideal total power of the system for the amplifier.
Product specificaties
| Merk: | Power Dynamics |
| Categorie: | Versterker |
| Model: | 952.071 |
Heb je hulp nodig?
Als je hulp nodig hebt met Power Dynamics 952.071 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Versterker Power Dynamics
8 Juni 2023
8 Juni 2023
8 Juni 2023
8 Juni 2023
8 Juni 2023
8 Juni 2023
8 Juni 2023
8 Juni 2023
8 Juni 2023
Handleiding Versterker
- Versterker Kenwood
- Versterker Onkyo
- Versterker Pioneer
- Versterker UPC
- Versterker Yamaha
- Versterker AB International
- Versterker Advance Acoustic
- Versterker Akg
- Versterker Alecto
- Versterker Alto Professional
- Versterker American Audio
- Versterker Ampeg
- Versterker Amplicom
- Versterker Arcam
- Versterker Audica
- Versterker Auna
- Versterker Behringer
- Versterker Bellman
- Versterker Beyerdynamic
- Versterker Bluetech
- Versterker DAP Audio
- Versterker Denon
- Versterker Eden
- Versterker Elektra
- Versterker Engl
- Versterker Fender
- Versterker Fenton
- Versterker Geemarc
- Versterker Harman Kardon
- Versterker Hartke
- Versterker Hifonics
- Versterker HQ Power
- Versterker HUMANTECHNIK
- Versterker Iriver
- Versterker Koda
- Versterker Konig Electronic
- Versterker Luxman
- Versterker Marantz
- Versterker Marquant
- Versterker Marshall
- Versterker MaxGear
- Versterker Monacor
- Versterker NAD
- Versterker Naim
- Versterker Nedis
- Versterker Novero
- Versterker Peavy
- Versterker Pyle
- Versterker Quadral
- Versterker Randall
- Versterker Reloop
- Versterker Rotel
- Versterker Samson
- Versterker Sansui
- Versterker Sherwood
- Versterker Skytec
- Versterker Skytronic
- Versterker Stagg
- Versterker Tangent
- Versterker Teac
- Versterker Tronics
- Versterker Velodyne
- Versterker Vonyx
- Versterker Ibiza Sound
Nieuwste handleidingen voor Versterker
24 December 2023
24 December 2023
16 September 2023
16 September 2023
15 September 2023
17 September 2023
15 September 2023
15 September 2023
15 September 2023
15 September 2023