Posiflex CR-6300 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Posiflex CR-6300 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 194 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Part 1
FCC Notes:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions manual, may cause
interference to radio communications. It has been tested and found to comply with
limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take
whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex Technologies, Inc. has made every effort for the accuracy of the content in this
manual. However, Posiflex will assume no liability for any technical inaccuracies or
editorial or other errors or omissions contained herein, nor for direct, indirect,
incidental, consequential or otherwise damages, including without limitation loss of
data or profits, resulting from the furnishing, performance, or use of this material.
This information is provided as is and Posiflex Technologies, Inc. expressly
disclaims any warranties, expressed, implied or statutory, including without limitation
implied warranties of merchantability or fitness for particular purpose, good title and
against infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex Technologies, Inc. reserves the
right to alter product designs, layouts or drivers without notification. The system
integrator shall provide applicative notices and arrangement for special options utilizing
this product. The user may find the most up to date information of the hardware from
web sites: http://www.posiex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex Technologies, Inc. will not be responsible for any loss of data
resulting from the use, disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technologies, Inc. the publisher of this documentation.
Copyright Posiflex Techn0logies, Inc. 2008
All brand and product names and trademarks are the property of their respective holders.
P/N:
192
6
090
0010
CR-6300 SERIES
CASH DRAWER
USER’S MANUAL
Rev. Original
Part 2
MODEL NUMBERS
Model CR- -6310 / CR 6314 / CR-6315
Bill Compartment 5 Fixed
Bill clip Metal
Coin compartment 5 Fixed
Coin Roll storage 4 Behind Cash Tray
Note: The CR- -631X series cash drawer is securely constructed with non
glossy textured static deposit painted heavy duty steel casing.
INFERFACE APPLICATION
Model
Number
Interface Security
Code Power / Source
CR-6310 Printer drive N. A. 12/24 V Pulse / Printer
CR-6314 Dedicated RS232 serial N. A. 12VDC / PC
CR-6315 USB USB PID
12VAC / Adaptor
CARTON CONTENTS
1. Cash drawer pre -assembled.
2. Users manual.
3. Key 2pcs: There is a key serial No. sticker on the cash drawer bottom
plate. If user lost the key he/she can order the key according to this
number.
4. Signal Cable depend on model
a). For CR-6310 2186301801: The standard signal cable is 0 which has a 8
pin plug at one end to connect to the cash drawer and a 6 pin plug at the
other end to connect to the POS system/printer. This cable serves for
most popularly used POS equipment such as all Posiflex POS terminals,
all Posiflex POS printers, most Epson POS printers, most Star POS
printers and all other compatibles. The user may cut the 6 pin end and
assemble this free end according to his POS printer specification if the
POS printer used utilizes different connection. The cable connection on
the wires is as below:
Wire color
RJ45 Function
Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse
Part 3
b). For CR-6314: The serial signal cable is already built on.
c). For CR-6315: USB cable is already built on.
5. Power Source depend on model
a). For CR-6310: not applicable
b). For CR-6315: Power adapter 12VAC 1.5A
c). For CR-6314: Power connector cable and I/O bracket plate.
INSTALLATION
CR-6310 Connect the drawer to POS system/printer as shown below:
CR-6314
1). Open the PC case. Put the
metal bracket with power
connector into one of the
I/O windows.
2). Connect the cable to the
IDE HDD type power
connector of PC power
supply. See illustration
below. Then close the PC
case.
3). Connect the DB-9
connector to the computer's serial COM port. Connect the 4P phone
plug connector to the added I/O bracket. See below illustration.
CASH DRAWER
With Printer Interface
8P Telephone Jack
8P Telephone Plug
6P Telephone Plug
Output to drawer
POS System or Printer
Ground
Rear View
Control signal input
616P PHONE JACK
POWER CORD
COM1
616P PHONE JACK
4PIN PHONE JACK
DB9


Product specificaties

Merk: Posiflex
Categorie: Niet gecategoriseerd
Model: CR-6300

Heb je hulp nodig?

Als je hulp nodig hebt met Posiflex CR-6300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Posiflex

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd