Porter-Cable PCC710 Handleiding
Porter-Cable
Multitool
PCC710
Lees hieronder de 📖 handleiding in het Nederlandse voor Porter-Cable PCC710 (40 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/40
www.portercable.com
20v Max* Lithium Oscillating Multi-Tool
Outil oscillant polyvalent sans fil á block-piles au
lithium-ion de 20v Max*
Multiherramienta oscilante de iones de litio de 20v Max*
CATALOG NUMBER
N° DE CATALOGUE
CATÁLOGO N°
PCC710
Instruction manual
Manuel d’instructions
Manual de’instrucciones
Batteries and chargers sold separately.
Blocs-piles et chargeurs vendus séparément
Las baterías y los cargadores se venden por separado
INSTRUCTIVO DE OPERACIÓN, CENTROS DE
SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts.
The nominal voltage is 18.
*La tension initiale maximale du bloc-piles (mesurée sans charge de travail) est de 20
volts. La tension nominale est de 18.
*El máximo voltaje inicial del paquete de baterías (medido sin una carga de trabajo) es 20
voltios. La tensión nominal es de 18.
F I T M E N T
NIVERSAL
™
COMPATIBLE WITH:
CON| / AVEC
D WALTE®
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.
com/ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre
nouveau produit.
Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto,
visite: www.portercable.com / ServiceAndSupport / ProductRegistration.aspx
2
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting The symbols YOUR SAFETY and PREVENTING PROBLEMS.
below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
GENERAL SAFETY RULES
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f)
If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d)
Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
3
better control of the power tool in unexpected situations.
f)
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g)
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a)
Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects that
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery, avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
6) SERVICE
a)
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring. Cutting accessory
contacting a “live” wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
• Use clamps or another practical way to secure and support the work piece to a
stable platform. Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
• Disconnect power before using tool near live wires or where there may be hidden wiring.
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.” Always check for hidden wiring, gas lines, or other
utilities before performing any material cutting or removal operations with the tool.
• . Wait for the cutter to stop before setting the tool down An exposed cutter may engage the
surface leading to possible loss of control and serious injury.
• Do not operate this tool for long periods of time. Vibration caused by the operating action of
this tool may cause permanent injury to fingers, hands, and arms. Use gloves to provide extra
Product specificaties
| Merk: | Porter-Cable |
| Categorie: | Multitool |
| Model: | PCC710 |
Heb je hulp nodig?
Als je hulp nodig hebt met Porter-Cable PCC710 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Multitool Porter-Cable
10 April 2024
8 December 2022
3 December 2022
Handleiding Multitool
- Multitool Bosch
- Multitool AEG
- Multitool DeWalt
- Multitool Bavaria
- Multitool Dremel
- Multitool Einhell
- Multitool Extech
- Multitool Fein
- Multitool Ferm
- Multitool Festool
- Multitool Gamma
- Multitool Gude
- Multitool Hama
- Multitool Hikoki
- Multitool Kress
- Multitool Makita
- Multitool Metabo
- Multitool Milwaukee
- Multitool Parkside
- Multitool Powerfix
- Multitool Powerplus
- Multitool Renovator
- Multitool Robust
- Multitool Rocktrail
- Multitool Ryobi
- Multitool Silvercrest
- Multitool Silverline
- Multitool Skil
- Multitool Stiga
- Multitool Taurus
- Multitool Toolcraft
- Multitool Topcraft
- Multitool Trotec
- Multitool Varo
- Multitool Vonroc
- Multitool Westfalia
- Multitool Workzone
- Multitool Worx
- Multitool Ozito
- Multitool Black And Decker
- Multitool Cocraft
- Multitool Meec Tools
- Multitool Hilti
- Multitool Cotech
- Multitool Fieldmann
- Multitool Lezyne
- Multitool Proxxon
- Multitool EGO
- Multitool Leatherman
- Multitool Dedra
- Multitool Graphite
- Multitool RIDGID
- Multitool Craftsman
- Multitool Alpha Tools
- Multitool G-Technology
- Multitool SKS
- Multitool Baumr-AG
- Multitool MTM
- Multitool Powerblade
- Multitool Meister Craft
- Multitool McKenzie
- Multitool Ergotools Pattfield
- Multitool CMT Orange Tools
- Multitool Donau Elektronik
Nieuwste handleidingen voor Multitool
10 December 2024
8 December 2024
4 December 2024
17 November 2024
17 November 2024
14 November 2024
20 Oktober 2024
23 Augustus 2024
30 Juli 2024
10 Juli 2024