Polk Vanishing 255c-RT Handleiding

Polk Speaker Vanishing 255c-RT

Lees hieronder de 📖 handleiding in het Nederlandse voor Polk Vanishing 255c-RT (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

LS Models

265-ls

65f/x®-ls

65-ls

255c-ls

RT Models

265-rt

625-rt

65f/x®-rt

65-rt

255c-rt

2 Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, stoves,

or other apparatus (including amplifiers)

that produce heat.

9. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

10. To reduce the risk of fire or WARNING:

electric shock, this apparatus should not be

exposed to rain or moisture and objects filled

with liquids, such as vases, should not be

placed on this apparatus.

Product Disposal—Certain interna-

tional, national and/or local laws and/

or regulations may apply regarding

the disposal of this product. For further

detailed information, please contact

the retailer where you purchased this

product or the Polk Audio Importer/

Distributor in your country. A listing of Polk Audio

Importer/Distributors can be found on the Polk Audio

website www.polkaudio.com or by contacting

Polk Audio at 5601 Metro Drive, Baltimore,

Maryland 21215, USA—Phone: +1 410 358-3600.

WARNING: Listen Carefully

Polk Audio loudspeakers and subwoofers are

capable of playing at extremely high volume levels,

which could cause serious or permanent hearing

damage. Polk Audio, Inc. accepts no liability for

hearing loss, bodily injury or property damage

resulting from the misuse of its products.

Keep these guidelines in mind and always use

your own good judgment when controlling volume:

 • Youshouldlimitprolongedexposureto

volumes that exceed 85 decibels(dB).

For more about safe volume levels, go to the

Occupational Health and Safety Administration

(OSHA) guidelines at http://www.osha.gov/dts/

osta/otm/noise/standards_more.html

TAKE INVENTORY

Inside each speaker container, you should

find the following:

1. One in-wall loudspeaker or one set

of loudspeakers for F/X® models only.

2. Speaker cutout mounting template

3. One Sheer-Grille (for each speaker)

3. Port plug (265- , 65 , 65-ls f x/ -ls ls,

265 , 65 65 only)-rt f x/ -rt & -rt

4. One Owner’s Manual

5. Registration Card

Important Note: If anything is missing or

damaged, or if your speaker fails to operate,

notify Polk Audio Customer Support Services

immediately at 800-377-7655.

INSTALLATION RECOMMENDATION

FOR OPTIMUM PERFORMANCE

Important Note: Vanishing Series Loudspeakers

are not magnetically shielded and should not be

placed closer than 1 (30cm) from a CRT (tube) ’

television or video monitor.

Important Note:Youshouldhaveathorough

understanding of and adhere to all local building

and fire codes. Also, you should be familiar with

the area behind the wall or ceiling into which

you plan to install your speakers. Always use

wire that meets appropriate building and fire

codes. (Note: Wiring is best performed

by an experienced professional.)

When installing your loudspeakers, be aware of

the weight of your particular model and the sturdi-

ness of the material into which you are installing

the speaker. Be aware of any concealed studs,

electrical wiring or plumbing in the wall or ceiling

into which you are installing the speakers.

If you doubt that you possess the necessary

skills or tools, consult your Polk Audio dealer

or a professional installer.

WIRE RECOMMENDATIONS

(minimum recommended)

Runs Gauge

Lengths up to 25' 18 or 16

Lengths greater than 25' 16 or 14

but less than 50'

Lengths greater than 50' 14 or 12

but less than 75'

Lengths greater than 75' 12

LOUDSPEAKER INSTALLATION

You will need:

 • Pencilformarkingthelocationofinstallation.

 • Keyholesaw,utilityknifeormaterial-

appropriate tool for cutting drywall

or other wall material.

 • Level.

 • Screwdriver,preferablypowered,

with Phillips Head bit.

 • Powerdrillwithappropriatebit

(optional, for starting wall cut).

Trace around the template.

Cut the hole with the appropriate tool.

IMPORTANT INFORMATION BEFORE

YOU INSTALL YOUR LOUDSPEAKERS

Wall Or Ceiling Surface Preparation

If you’re installing your Vanishing Series speaker

into a heavily textured wall or ceiling (e.g. stucco

or popcorn finish), you must prepare the wall

surface immediately around the speaker

cutout. Sanding and smoothing the wall or

ceiling surface will ensure the speaker and

grille both seat properly and flat to the surface.

For more information visit our website at www.polkaudio.com 3

IMPORTANT INFORMATION SHOULD

YOU CHOOSE TO PAINT YOUR GRILLES

Because of its ultra-thin profile, the Vanishing

Series Sheer-Grille™ requires a specific painting

procedure to ensure smooth, even coverage.

The grille scrim and perforated grille come

assembled and require no disassembly.

Paint Recommendation

We highly recommend you use a can of spray

paint matched to the wall color you want the

Sheer-Grilles to blend with.

Important Note: Never use a brush or roller to

paint the grilles, as this will clog the perf holes.

To paint the Sheer-Grille

1. Elevate the Sheer-Grille off of a flat surface.

This will ensure even coverage of the grille

frame and make it easier to pick up.

Mounting Idea: Two spray can caps will

raise the grille high enough.

2. Hold the spray paint about 12 from "

the grille and at a 45° angle.

3. Apply one light, thin coat, moving evenly

side to side over the grille, then work your

way around the perimeter of the grille

to ensure you cover the grille frame.

4. After each application of paint, wait

approximately 1 minute, rotate the

grille 90°, and apply the next thin coat.

Important Note:Youmustrotatethegrille

90°. Use your hands to define the next 90°

rotation and always rotate the grille in the

same direction of travel.

5. Three light, even applications should cover

the grille and frame adequately. Remember

to work your way around the grille frame

to cover it evenly and completely.

SURROUND SPEAKER PLACEMENT

Polk Audio F/X® surround loudspeakers give you

nearly endless placement options. But remember

that where you place your surround speakers

requires some careful thought, as installation

requires that you cut a hole in your wall or ceiling.

Diagram shows speaker locations for 5.1

and 7.1 systems, when two additional in-wall

speakers are installed in the rear wall.

Left/Right Orientation: F/X® surround loud-

speakers have a left/right orientation, and each

speaker is clearly marked on the serial number

label on the back of the magnet for installation

on either the right or left. Right and left are

defined from your listening area as you face

your system’s center channel.

Center Channel Speaker Placement

Install the 255 or 255c-ls c-rt as close as possible

to ear level. If the speaker needs to be installed

higher, aim the tweeter down as required.

Do not block the center channel with

your TV or furniture.

Please Note: For more on speaker placement go

to: www.polkaudio.com/education/article.php?id=15

or www.polkaudio.com/downloads/hthandbook.pdf

ROOM ENVIRONMENT CONTROLS

Imaging (65 model only) f x/ -ls

F/X Surround Loudspeakers offer switchable

“Diffuse” and “Solid” imaging patterns

to create the surround effect you desire.

A “Diffuse” image is defined as one which

creates a “cloud” of sound; think of the effect

as ambient sounds which fill the environment

all around you, but are less localizable.

A “Solid” image is one which creates a more pin-

point sound; sound is more localized. The location

of sounds in the sound field is more identifiable.

Tweeter Switch

(LS and RT models except F/X models)

Filter—If your listening room is very reflective,

with smooth sheetrock walls, hardwood floors,

and non-cushioned furniture, the sound will be

overly “bright” and unnatural. Selecting the “Filter”

setting compensates for the effect of reflectiv-

ity in a hard room. Tweeter attenuation flattens

room response, without hindering higher frequency

response, for warmer, more realistic sound

and more accurate imaging.

Norm—If your room is not reflective, with curtains,

artwork, lots of cushioned furniture and carpeting,

sound will be absorbed by the room, resulting in

more realistic reproduction and more accurate imag-

ing. In this case, select the tweeter “Norm” setting.

Wall Distance Switch (65f x/ -rt and

all LS Models except the Center Channel)

In-wall loudspeakers excel when placed more

than 2’ (60cm) from side walls. If position

limitations demand that in-wall loudspeakers

be installed closer than 2’ (60cm) from side walls

or ceiling, the proximity of the surface can result

in a response “bump” between 50 and 200Hz.

This can cause in-wall speakers to sound “boomy.”

The “Wall Distance” switch flattens response

and eliminates “boominess” without sacrificing

deep bass response, for more lifelike sound.

Filter / Norm

Tweeter

Wall Dist.

>2'

(60cm)(60cm)

<2'

Diffuse / Solid

Imaging

Product specificaties

Merk:	Polk
Categorie:	Speaker
Model:	Vanishing 255c-RT

Heb je hulp nodig?

Als je hulp nodig hebt met Polk Vanishing 255c-RT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Polk

Polk Signature Elite ES90 Handleiding

18 Augustus 2024

Polk ES90 Handleiding

13 November 2023

Polk PA D4000.4 Handleiding

20 Juli 2023

Polk TSi200 Handleiding

13 Juni 2023

Polk Monitor XT90 Handleiding

11 Juni 2023

Polk TSX330 Handleiding

1 Juni 2023

Polk RTi A7 Handleiding

28 Mei 2023

Polk Vanishing 255c-RT Handleiding

26 Mei 2023

Polk T30 Handleiding

14 Mei 2023

Polk S50 Handleiding

13 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Sven MC-5 Handleiding

20 December 2024

Sven SPS-535 Handleiding

20 December 2024

Devialet Mania Deep Handleiding

19 December 2024

Kicker Premium 51MSC65 Handleiding

18 December 2024

Kicker Premium 51MSC8 Handleiding

18 December 2024

Monitor Audio Apex A10AV12 Handleiding

17 December 2024

Audac ATEO6M Handleiding

17 December 2024

Audac CIRA724I Handleiding

17 December 2024

NGS WILD Space 3 Handleiding

16 December 2024

HK Audio LINEAR 3 112 XA Handleiding

16 December 2024