POLARIS PAC Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor POLARIS PAC (60 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/60
H0770000_REVB
Above-Ground
Pool Automation Control
PAGAUT
Owner’s Manual
English | Français | Español
WARNING
FOR YOUR SAFETY - This product must be installed by a qualiîš¿ed pool professional or personnel who are
knowledgeable with the standards and code requirements for above ground pool equipment. The maintainer
must be a qualied pool professional or personnel with su󰀩cient experience in pool equipment installation and
maintenance so that all of the instructions in this manual can be followed exactly.
Improper installation and/or operation may result in death, serious injury or property damage. DO NOT MODIFY
THIS EQUIPMENT.
Before installing this product, read and follow all warning notices and instructions that accompany
this product. Failure to follow warning notices and instructions may result in death, serious injury
or property damage. Consult Polaris customer service at 1-800-822-7933 for assistance. Improper
installation and/or operation may void the warranty.
ENGLISH Polaris
®
PAC
â„¢
Pool Automation Control | Owner’s Manual
Page 2
Table of Contents
Section 1. Important Safety Instructions 3 ...................................................................................................
Section 2. System Overview 5 .......................................................................................................................
2.1 Package Contents..................................................................................................................................... 5
2.2 Electrical Speciîš¿cations ............................................................................................................................ 5
2.3 Materials and Tools ................................................................................................................................... 5
Section 3. Install Controller Box 5 ................................................................................................................
3.1 Mount the Controller Enclosure ................................................................................................................ 5
3.2 Bonding the Power Center ........................................................................................................................ 6
Section 4. High Voltage Plug In 6 ..................................................................................................................
4.1 Plug In Assignment ................................................................................................................................... 6
Section 5. Low Voltage Wiring 6 ....................................................................................................................
5.1 Wire the Temperature Sensors ................................................................................................................. 6
5.2 Install the Water Temperature Sensor....................................................................................................... 6
5.3 Install a Solar Sensor (if applicable) ......................................................................................................... 7
5.4 Install Additional Low Voltage Equipment (i.e., Heater Connection) ......................................................... 7
5.5 Install iAquaLink
â„¢ (if applicable) ............................................................................................................... 7
5.6 Mount the iAquaLink Device ..................................................................................................................... 7
5.7 Wire the iAquaLink Device ........................................................................................................................ 7
5.8 Install Jandy Valve® Actuators (JVAs) (if applicable) ................................................................................. 7
Section 6. User Interface 7 .............................................................................................................................
6.1 Navigation Buttons .................................................................................................................................... 7
Section 7. Install Settings 8 ...........................................................................................................................
7.1 Freeze Protect .......................................................................................................................................... 8
7.2 Units .......................................................................................................................................................... 9
7.3 Languages ................................................................................................................................................ 9
7.4 Clear Memory ........................................................................................................................................... 9
7.5 Color Lights ............................................................................................................................................... 9
7.6 Label Auxiliary Functions ........................................................................................................................ 10
7.7 Temp Calibrate ........................................................................................................................................ 10
7.8 Solar Priority (if applicable) ..................................................................................................................... 10
7.9 Assign JVA .............................................................................................................................................. 10
7.10 Diagnostics ..............................................................................................................................................11
Section 8. Main Menu 12 ................................................................................................................................
8.1 Equipment Status.................................................................................................................................... 12
8.2 Filter Pump .............................................................................................................................................. 12
8.3 Pool Heater On/O󰀨 ................................................................................................................................. 12
8.4 Turn Aux1, Aux2 or Aux3 On/O󰀨 ............................................................................................................ 12
8.5 Turn Specic Equipment On/O󰀨 Manually .............................................................................................. 13
8.6 Turn All Equipment O󰀨 ............................................................................................................................ 14
Section 9. Pool Only System Menu Flow Diagrams 15 ...............................................................................
9.1 Main Menu .............................................................................................................................................. 15
9.2 Install Settings Menu............................................................................................................................... 16
Section 10. Glossaries 17 ................................................................................................................................
10.1 Glossary of Safety Delays and Lockouts ................................................................................................ 17
10.2 Glossary of Alert Messages .................................................................................................................... 17
Section 11. Wiring Diagram 18 ........................................................................................................................
FCC Regulatory Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation/
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance may void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di󰀨erent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ENGLISH
Polaris
®
PAC
â„¢
Pool Automation Control | Owner’s Manual Page 3
Section 1. Important Safety Instructions
READ AND FOLLOW ALL INSTRUCTIONS
All electrical work must be performed by a licensed electrician and conform to all national, state, and local codes. When
installing and using this electrical equipment, basic safety precautions should always be followed, including the following:
DANGER
To reduce the risk of severe injury or death, do not remove the suction îš¿ttings of your spa or hot tub. Never operate
a spa or hot tub if the suction îš¿ttings are broken or missing. Never replace a suction îš¿tting with one rated less than
the ow rate marked on the equipment assembly.
WARNING
Prolonged immersion in hot water may induce hyperthermia. Hyperthermia occurs when the internal
temperature of the body reaches a level several degrees above the normal body temperature of 98.6°F
(37°C). The symptoms of hyperthermia include dizziness, fainting, drowsiness, lethargy, and an increase in the
internal temperature of the body. The e󰀨ects of hyperthermia include: 1) unawareness of impending danger;
2) failure to perceive heat; 3) failure to recognize the need to exit spa; 4) physical inability to exit spa; 5) fetal
damage in pregnant women; 6) unconsciousness resulting in a danger of drowning. The use of alcohol, drugs,
or medication can greatly increase the risk of fatal hyperthermia.
WARNING
To Reduce the Risk of Injury
a) The water in a spa should never exceed 104°F (40°C). Water temperatures between 100°F (38°C) and
104°F (40°C) are considered safe for a healthy adult. Lower water temperatures are recommended for
young children and when spa use exceeds 10 minutes.
b) Since excessive water temperatures have a high potential for causing fetal damage during the early
months of pregnancy, pregnant or possibly pregnant women consult a physician before using a spa or
hot tub, and should limit spa water temperatures to 100°F (38°C). Water temperature in excess of 100°F
(38°C) may be injurious to your health.
c) Before entering a spa or hot tub, the user should measure the water temperature with an accurate
thermometer since the tolerance of water temperature-regulating devices varies.
d) The use of alcohol, drugs, or medication before or during spa or hot tub use may lead to unconsciousness
with the possibility of drowning.
e) Obese persons and persons with a history of heart disease, low or high blood pressure, circulatory system
problems, or diabetes should consult a physician before using a spa.
f) Persons using medication should consult a physician before using a spa or hot tub since some medication
may induce drowsiness while other medication may a󰀨ect heart rate, blood pressure, and circulation.
WARNING
Risk of electric shock which could result in severe injury or death - Install the controller at least 2 ft.
(0.6m) vertically o󰀨 the ground and ve (5) feet (1.52 m) from the inside wall of the pool and/or hot tub using
non-metallic plumbing so children cannot use the equipment to access the pool and be injured or drown.
Canadian installations must be at least three (3) meters from the water.
PREVENT CHILD DROWNING: Do not let anyone, especially small children, sit, step, lean or climb on any
equipment installed as part of your pool’s operational system.
Children should not use spas or hot tubs without adult supervision.
Do not use spas or hot tubs unless all suction guards are installed to prevent body and hair entrapment.
People using medications and/or having an adverse medical history should consult a physician before using a
spa or hot tub.
WARNING
To avoid injury ensure that you use this control system to control only packaged pool/spa heaters which have
built-in operating and high limit controls to limit water temperature for pool/spa applications. This device should
not be relied upon as a safety limit control.


Product specificaties

Merk: POLARIS
Categorie: Niet gecategoriseerd
Model: PAC

Heb je hulp nodig?

Als je hulp nodig hebt met POLARIS PAC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd POLARIS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd