POLARIS 850 Indy VR1 129 (2022) Handleiding

POLARIS Niet gecategoriseerd 850 Indy VR1 129 (2022)

Lees hieronder de 📖 handleiding in het Nederlandse voor POLARIS 850 Indy VR1 129 (2022) (206 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/206

2022

INDY XC

INDY VR1

INDY XCR

INDY ADVENTURE

SWITCHBACK ASSAULT

SWITCHBACK XC

VOYAGEUR

NORDIC PRO

OWNER’S

MANUAL

For Maintenance and Safety

WARNING

Operating, servicing, and maintaining a passenger vehicle or off-road

vehicle can expose you to chemicals including engine exhaust, carbon

monoxide, phthalates, and lead, which are known to the State of California

to cause cancer and birth defects or other reproductive harm. To minimize

exposure, avoid breathing exhaust, do not idle the engine except as

necessary, service your vehicle in a well-ventilated area and wear gloves

or wash your hands frequently when servicing your vehicle.

For more information go to www.P65Warnings.ca.gov/passenger-vehicle.

!WARNING

Read, understand, and follow all of the instructions and safety

precautions in this manual and on all product labels.

Failure to follow the safety precautions

could result in serious injury or death.

For videos and more information

about a safe riding experience with

your Polaris vehicle, scan this QR

code® with your smartphone.

Unless noted, trademarks are the property of Polaris Industries Inc.

Allen® is a registered trademark of APEX BRANDS, INC. Loctite® is a

registered trademark of Henkel Corporation. QR Code® is a registered

trademark of DENSO WAVE INCORPORATED. BatteryMINDer® is a

registered trademark of VDC Electronics Inc. Bluetooth® is a registered

trademark of Bluetooth Sig, Inc. NGK® is a registered trademark of NGK

Spark Plug Co., Ltd. NYOGEL® is a registered trademark of Nye Lubricants,

Inc. MIKUNI® is a registered Trademark of MIKUNI CORPORATION. KLIM®

is a registered trademark of Teton Outfitters, L. L. C. FOX® is a registered

trademark of Fox Factory Inc. ORTOVOX® is a registered trademark of

Ortovox Sportartikel Gmbh. SAE® is a registered trademark of Society of

Automotive Engineers, Inc. Hayes® is a registered trademark of Hayes

Bicycle Group, Inc. INVANCE® is a registered trademark of CVTECH-IBC

INC. Woody's® registered trademark of International Engineering &

Manufacturing Inc.

publication is based on the latest product information at the time of

publication. Due to constant improvements in the design and quality of

production components, some minor discrepancies may result between the

actual vehicle and the information presented in this publication. Depictions

and/or procedures in this publication are intended for reference use only. No

liability can be accepted for omissions or inaccuracies. Any reprinting or

reuse of the depictions and/or procedures contained within, whether whole or

in part, is expressly prohibited.

The original instructions for this vehicle are in English. Other languages are

provided as translations of the original instructions.

Printed in U.S.A.

9940131 Rev 02

Thank you for purchasing a POLARIS vehicle, and welcome to our world-wide

family of POLARIS enthusiasts. Be sure to visit us online at www.polaris.com for

the latest news, new product introductions, upcoming events, career

opportunities and more.

Here at POLARIS we proudly produce an exciting line of utility and recreational

products. We believe POLARIS sets a standard of excellence for all utility and

recreational vehicles manufactured in the world today. Many years of experience

have gone into the engineering, design, and development of your POLARIS

vehicle, making it the finest machine we’ve ever produced.

For safe and enjoyable operation of your vehicle, be sure to follow the

instructions and recommendations in this owner’s manual. Your manual contains

instructions for minor maintenance, but information about major repairs is

outlined in the POLARIS Service Manual and can be performed by a factory

certified Master Service Dealer (MSD) technician.

Your POLARIS dealer knows your vehicle best and is interested in your total

satisfaction. Your POLARIS dealership can perform all of your service needs

during and after the warranty period.

For the most up-to-date owner’s manual visit https://www. polaris. com/en-us/

owners-manuals.

WELCOME

The following signal words and symbols appear throughout this manual and on

your vehicle. Your safety is involved when these words and symbols are used.

Become familiar with their meanings before reading the manual.

DANGER

DANGER indicates a hazardous situation which, if not avoided, WILL result in

death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, COULD result

in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, COULD result

in minor to moderate injury.

NOTICE

NOTICE provides key information by clarifying instructions.

IMPORTANT

IMPORTANT provides key reminders during disassembly, assembly, and

inspection of components.

The Prohibition Safety Sign indicates an action NOT to take in

order to avoid a hazard.

The Mandatory Action Sign indicates an action that NEEDS to

be taken to avoid a hazard.

SAFETY SYMBOLS AND SIGNAL WORDS

Introduction . . . . . . . . . . . . . . . . . . . . 7

Safety . . . . . . . . . . . . . . . . . . . . . . 13

Features . . . . . . . . . . . . . . . . . . . . . 33

Ride Command Display . . . . . . . . . . . . . 69

The Perfect Fit . . . . . . . . . . . . . . . . . . 107

Snowmobile Break-In . . . . . . . . . . . . . . 131

Pre-Ride Inspections . . . . . . . . . . . . . . . 133

Operation . . . . . . . . . . . . . . . . . . . . 141

Maintenance . . . . . . . . . . . . . . . . . . 155

Specifications . . . . . . . . . . . . . . . . . . 201

Diagnostic Trouble Codes (DTC). . . . . . . . . . 223

Troubleshooting . . . . . . . . . . . . . . . . . 237

Warranty . . . . . . . . . . . . . . . . . . . . 245

Maintenance Log . . . . . . . . . . . . . . . . 255

TABLE OF CONTENTS

INTRODUCTION

IMPORTANT NOTES FOR OWNERS AND

DRIVERS

After reading this manual, store it in the snowmobile for convenient reference. It

should remain with the snowmobile when the snowmobile is sold.

Some of the illustrations and photos used in this manual are general

representations. Your model may differ.

Follow the maintenance program outlined in this manual. Preventive

maintenance ensures that critical components of the snowmobile are inspected

at specific mileage intervals. This service can be performed by your authorized

POLARIS dealer.

You and your dealer must complete the registration form included with your

snowmobile and forward it to us. This completed form is necessary to ensure

warranty coverage.

Protect and preserve your right to ride by joining your local trail riding clubs.

When teaching inexperienced operators to ride, set up a predetermined course

for practice. Make sure they know how to drive and control the snowmobile

before allowing them to make longer trips. Teach them proper snowmobile

courtesy, and enroll them in driver’s training and safety courses sponsored by

local or state organizations.

PRESERVATION OF THE ENVIRONMENT

POLARIS is committed to supporting an environmental education campaign. We

encourage state and provincial governments across the snowbelt to adopt

rigorous safety training programs that encourage protection of our environment,

including wildlife and vegetation.

Snowmobile clubs and other organizations are working together to protect our

environment. Please support their efforts and operate your snowmobile with

consideration for the protection and preservation of our environment.

NOISE LEVEL

One of the most publicized issues about snowmobiles is noise. The Society of

Automotive Engineers (SAE®), the standard-setting body for snowmobile

development, recommends that snowmobiles conform to prescribed sound

levels.

INTRODUCTION

POLARIS snowmobiles are engineered to conform to these SAE® standards.

Our muffler systems are designed to reduce noise levels and must not be

altered or removed. The sound of your snowmobile may not be welcome to non-

snowmobilers, so you have a responsibility to operate your snowmobile with

concern for others. We do our part by manufacturing quieter machines; we ask

your help to further reduce the impact of noise by operating your snowmobile

safely and responsibly.

AIR POLLUTION

POLARIS engineers continuously investigate ways to reduce emission levels of

two-stroke engines. We expect our efforts to lead to the reduction of potential air

pollution.

In addition to our technological research, we encourage government agencies,

manufacturers, distributors, dealers, ecologists, and other interested parties to

work together to develop data on environmental topics.

VEHICLE IDENTIFICATION NUMBERS

Record your snowmobile's identification numbers and key number in the spaces

provided.

NOTICE

If installing an aftermarket tunnel wrap, do not cover the tunnel certification,

tunnel VIN or emissions certification labels with the wrap. If the tunnel wrap

doesn’t provide an opening for these labels, remove the section of wrap where

the labels are located.

Certification Label

Tunnel VIN

Emission Certification Label

VEHICLE MODEL NUMBER:

TUNNEL VIN (RIGHT SIDE OF TUNNEL):

ENGINE SERIAL NUMBER (ON RECOIL

HOUSING):

KEY NUMBER:

INTRODUCTION

NEAR-FIELD COMMUNICATION (NFC)

(IF EQUIPPED)

Some Polaris vehicles come equipped with a near-field communication (NFC)

chip. The NFC chip is embedded in the Polaris emblem located at the front of

the vehicle and seamlessly connects you to a digital platform of vehicle

information and tools. See your dealer for more information.

IMPORTANT

Not all devices are equipped with an NFC reader. Additionally, some devices

require third party applications to access NFC content. For questions regarding

the NFC reader on your device, refer to the device’s user manual.

On models equipped with NFC, place your smartphone directly over the Polaris

emblem to do the following:

• View vehicle-specific

information

• Access your Polaris Garage

• Download and view the

owner’s manual

• View accessory instructions

• Watch how-to videos

• Access warranty information

• Check for service notifications

RIDE COMMAND WITH NFC

Additional NFC features are available when using the Ride Command mobile

app. To access these features, do the following:

1. Download the Ride Command mobile app from the Apple App Store® or

Google Play® store.

2. Create or log in to an existing account.

3. From the Ride Command mobile app home screen, select Add Vehicle.

4. On the vehicle, tap the NFC-enabled badge with the phone to scan the

vehicle.

5. Confirm information, name your vehicle, and tap add to garage.

SYSTEM REQUIREMENTS

Refer to device manufacturer’s instructions to verify NFC read capability, and/or

NFC-capable add-ons.

INTRODUCTION

RADIO COMPLIANCE STATEMENTS

USA RADIO COMPLIANCE

This vehicle contains the following radio equipment or components that contain

radio equipment:

COMPONENT COMPONENT ID MANUFACTURER

B1 Gauge Bluetooth®

CYBLE-222014-01 Cypress

Semiconductor®

9200 Series Display RC-7W Polaris Industries Inc.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

CAUTION

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

CANADA RADIO COMPLIANCE

This vehicle contains the following radio equipment or components that contain

radio equipment:

COMPONENT COMPONENT ID MANUFACTURER

B1 Gauge Bluetooth®

CYBLE-222014-01 Cypress

Semiconductor®

9200 Series Display RC-7W Polaris Industries Inc.

This device contains license-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s license-exempt RSS

(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may

cause undesired operation of the device.

INTRODUCTION

IMPORTANT

For applications that use vehicle-to-vehicle (V2V) communication, radio

transmitter IC 5966A-RC7W has been approved by Innovation, Science and

Economic Development Canada (ISED) to operate with Polaris antenna (part

number 4019211) with gain of 3 dBi. Any antenna that has a gain greater than

3 dBi is prohibited for use with this device.

EUROPEAN UNION (EU) RADIO COMPLIANCE

This vehicle contains the following radio equipment or components that contain

radio equipment:

COMPONENT B1 Gauge Bluetooth®

LE 9200 Series Display

COMPONENT ID CYBLE-222014-01 RC-7W

MANUFACTURER Cypress Semiconductor Polaris Industries Inc.

TRANSMITTING

FREQUENCY* 2402–2480 MHz 2402–2480 MHz

MAX RF

TRANSMITTING PWR 0.00078 W 0.2432 W

* Other transmitting radio frequencies may exist outside of EU markets.

Hereby, Polaris Industries Inc. declares that the above radio equipment is in

compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address:

https://www.polaris.com/en-us/radio-conformity/

REPORTING SAFETY DEFECTS (CANADA)

To report a safety defect to Transport Canada, you may either fill out an online

defect complaint form at their website (English: http://www/tc/gc/ca/recalls,

French: http://www.tc.gc.ca/rappels) or contact their Defect Investigations and

Recalls Division by calling toll-free 1-800-333-0510 (Canada) or 819-994-3328

(Ottawa-Gatineau area / International).

INTRODUCTION

STAY CLEAR OF ENGINE

Never attempt adjustments with the engine running. Turn off the ignition, open

the side panels or hood, make the adjustment, secure shields and guards,

secure the side panels and hood, and then restart the engine to check its

operation.

WARNING

Serious injury can occur if fingers or clothing contact the moving parts of an

engine. Always stop the engine before attempting adjustments.

RIDING POSITION

Operating a snowmobile requires skill and balance for proper control. Rider

positions may vary with experience and the features available on some

snowmobiles, but under many conditions, the proper position is to be seated

with both feet on the running boards and both hands on the handlebar grips for

proper throttle, brake and steering control.

WARNING

Improper riding position may reduce control and could result in serious injury or

death. Always ride in a position that allows for control of your vehicle.

RIDER CAPACITY

This snowmobile is designed for a single rider only. Never carry a passenger on

this snowmobile.

SAFETY

RIDING APPAREL

HELMET

Wearing a helmet can prevent a severe head injury. Whenever riding this

POLARIS vehicle, always wear a helmet that meets or exceeds established

safety standards. Clasp the buckle and pull each strap tight to ensure the helmet

is properly secured to the head.

Parents should verify that young operators have a helmet that fits, and should

obtain one of proper size if it does not fit before allowing operation.

Approved helmets in the USA and Canada bear a U.S.

Department of Transportation (DOT) label.

Approved helmets in Europe, Asia and Oceania bear

the ECE 22.05 label. The ECE mark consists of a

circle surrounding the letter E, followed by the

distinguishing number of the country which has

granted approval. The approval number and serial

number will also be displayed on the label.

EYE PROTECTION

Do not depend on eyeglasses or sunglasses for eye protection. Whenever riding

a POLARIS vehicle, always wear shatterproof goggles or use a shatterproof

helmet face shield. POLARIS recommends wearing approved Personal

Protective Equipment (PPE) bearing markings such as VESC 8, V-8, Z87.1, or

CE. Make sure protective eye wear is kept clean.

SAFETY

CLOTHING

WARNING

Avoid wearing loose clothing or long scarves, which can become entangled in

moving parts and cause serious injury. Always wear an approved helmet and

eye protection.

Be prepared, be warm and be comfortable

when riding. Be aware of the weather

forecast, especially the windchill, and dress

accordingly. See page 28.

SURVIVAL PREPARATION

For your safety, always ride in a group of other snowmobilers. Always tell

someone where you're going and how long you expect to be gone. If it isn't

possible to ride with others, and you must travel into remote areas, always carry

survival equipment that's appropriate to the conditions you may encounter. Such

equipment may include, but is not limited to: extra clothing, a sleeping bag, a

flashlight, food and water, a signaling mirror, a means of building a fire, and a

two-way radio or cellular telephone.

Always carry the owner’s manual on your snowmobile. For added protection,

purchase and carry the following items on your snowmobile as well:

• Spare Drive Belt

• Extra Set of Spark Plugs

• Tow Rope

• Extra Oil

• Fuel Deicer

• Winter Survival Kit

• Trail Map

• First Aid Kit

• Tool Kit

SAFETY

EXCESSIVE SPEED

WARNING

High speed driving, especially at night, could result in serious injury or death.

Always reduce speed when driving at night or in inclement weather.

Always observe all state and local laws governing snowmobile operation and

speed limits. Always be alert and pay attention to the trail ahead. If your speed is

40 MPH (64 km/h), your snowmobile is traveling about 60 feet (18 m) per

second. If you look back for only two seconds, your snowmobile will travel about

120 feet (36 m). If your speed is 60 MPH (96 km/h), your snowmobile will travel

about 180 feet (55 m) in two seconds.

Traveling at night requires extra caution. Check headlight and taillight to ensure

proper operation, and don’t over-drive your headlight beam. Always be able to

bring your snowmobile to a stop in the distance illuminated by the headlight.

DRIVER AWARENESS

Slow down when traveling near poles, posts, or other obstacles. Be especially

alert if you're snowmobiling after dark. Always be on the alert for wire fences.

Single strands are especially dangerous, since there may be a great distance

between posts. Guy wires on utility poles are also difficult to distinguish.

Make sure the way is clear before crossing railroads

and other roads and highways. The noise of your

snowmobile will drown out the sound of approaching

vehicles. Look ahead, behind, and to both sides before

turning or crossing railroad tracks or highways. Steep

embankments may also hide your view. Always leave

yourself a way out.

Variances in snow depth and/or water currents may result in uneven ice

thickness. You may drown if you break through the ice. Never travel on frozen

bodies of water unless you have first verified that the ice is sufficiently thick to

support the weight and moving force of the snowmobile, you and your cargo,

together with any other vehicles in your party. Always check with local authorities

and residents to confirm ice conditions and thickness over your entire route.

Snowmobile operators assume all risk associated with ice conditions on frozen

bodies of water.

When teaching inexperienced operators to ride, set up a predetermined course

for practice. Make sure they know how to drive and control the snowmobile

before allowing them to make longer trips. Teach them proper snowmobile

courtesy, and enroll them in driver's training and safety courses.

SAFETY

GET THE SAFETY GEAR

In addition to carrying a spare belt, spark plugs and tools on each snowmobile,

each person in your riding group should wear the recommended snowmobile

riding apparel and carry (on their person) the following survival items when

riding in mountainous terrain:

• A digital avalanche beacon with new

“fresh” alkaline batteries

• An avalanche probe

• A compact shovel and hand saw

• A backpack (preferably an avalanche

air bag backpack)

• Emergency provisions, including the

following items:

– Small first aid kit

– Extra pair of gloves

– Extra dry socks

– Tow rope, map, compass/GPS

– Lighter or waterproof matches

– Signal mirror and whistle

– Bottled water

– High calorie snack food

– Compact emergency blanket

SAFETY

GET THE FORECAST

Make a riding plan based on the current avalanche and weather forecast. It is

important to remember that overnight weather conditions may have created

unsafe riding terrain that was considered safe the day before.

Follow the page links below to locate current avalanche reports and conditions

for your area of operation.

• www.avalanche.org for North American riders.

• www.avalanche.ca for Canadian riders.

• www.lavinprognoser.se for Swedish riders.

• www.avalanches.org for European riders.

GET AVALANCHE SAFETY TRAINING

POLARIS recommends you and all members of your riding group participate in

an avalanche safety course. Visit the education section of the Avalanche

website for your region.

AVALANCHE AWARENESS

Avalanches are a matter of timing. A steep slope can be safe one day, but

unsafe the next day due to changing weather and wind conditions.

• Always review the user instructions provided with your safety equipment and

follow the recommendations for maintenance, testing and use. Always test

your safety equipment to ensure it works properly before riding in

mountainous terrain.

• Always store your survival gear in your backpack and wear the backpack. Do

not store your survival gear on the snowmobile.

• Always research current avalanche conditions in your area of operation

before riding. Check with local law enforcement, resort or lodging personnel,

gas station attendants and other riders to learn about current conditions and

any advisories in the area.

• Read and understand the avalanche danger scale. Pay attention to any

danger level warnings issued for your area of operation.

• Always remain alert while riding in mountainous terrain. Be aware of

snowpack conditions above you as you ride. Avalanches can occur at any

time regardless of current condition reports.

SAFETY

North American Public Avalanche Danger Scale

Avalanche danger is determined by the likelihood, size and distribution of

avalanches.

DANGER LEVEL TRAVEL ADVICE LIKELIHOOD

AVALANCHES

AVALANCHE

SIZE AND

DISTRIBUTION

Extreme

Avoid all avalanche

terrain.

Natural and

human-triggered

avalanches

certain.

Large to very

large avalanches

in many areas.

High

Very dangerous

avalanche

conditions. Travel

in avalanche terrain

not recommended.

Natural

avalanches

likely; human-

triggered

avalanches very

likely.

Large

avalanches in

many areas; or

very large

avalanches in

specific areas.

Considerable

Dangerous

avalanche

conditions. Careful

snowpack

evaluation,

cautious route-

finding and

conservative

decision-making

essential.

Natural

avalanches

possible;

human-triggered

avalanches

likely.

Small

avalanches in

many areas; or

large avalanches

in specific areas;

or very large

avalanches in

isolated areas.

Moderate

Heightened

avalanche

conditions on

specific terrain

features. Evaluate

snow and terrain

carefully; identify

features of

concern.

Natural

avalanches

unlikely; human-

triggered

avalanches

possible.

Small

avalanches in

specific areas; or

large avalanches

in isolated areas.

Low

Generally safe

avalanche

conditions. Watch

for unstable snow

on isolated terrain

features.

Natural and

human-triggered

avalanches

unlikely.

Small

avalanches in

isolated areas or

extreme terrain.

Safe backcountry travel requires training and experience. You control your own risk by

choosing where, when and how you travel.

SAFETY

ICE AND SNOW BUILD-UP

WARNING

Ice and snow build-up may interfere with the steering of your snowmobile,

resulting in serious injury or death. Keep the underhood area free of snow and

ice.

Before driving, manually turn the skis to the left and right to be sure ice and

snow are not interfering with full left and right steering. If difficulty is

encountered, remove ice and snow build-up that may be obstructing the steering

linkage.

DRIVING ON SLIPPERY SURFACES

WARNING

Never attempt an abrupt change of direction when operating on slippery

surfaces. Proceed slowly and use extra caution. Driving on ice or hard-packed

snow reduces steering and braking control, which may result in loss of control

and serious injury or death. Slow down and use extra caution when operating

on slippery surfaces.

INADEQUATE SNOW CONDITIONS

Since snow provides the only lubrication for the power slide suspension and, on

liquid cooled models, cooling for the engine, adequate snow cover is a

requirement for operation of your snowmobile.

NOTICE

Driving in too little snow will result in excessive wear and damage to the slide

rail, track and/or engine.

WARNING

Inadequate cooling and lubrication will lead to overheating of the slide rail and

track, causing premature wear, damage and failure, which can result in serious

injury. Reduce speeds and frequently drive into fresh snow to allow adequate

cooling and polishing of the slide rail and track surfaces. Avoid operating for

prolonged periods on ice, hard-packed surfaces or roads.

OPERATING IN DEEP SNOW

If the snowmobile becomes stuck in snow, clear the running board area of snow,

then step down the snow in front of the snowmobile so that when the throttle is

opened, the snowmobile will be able to climb up and over the snow.

SAFETY

HIDDEN OBSTRUCTIONS

Always be aware of surroundings and terrain when riding your snowmobile.

Hazardous obstructions may be hidden beneath the snow. Reduce speed and

use extra caution whenever riding off established trails. Striking a hidden

obstacle could cause loss of control of your vehicle and lead to severe injury or

death. Remain on established trails whenever possible to reduce exposure to

hazards.

DRIVING DOWNHILL

When riding downhill, shift your weight to the rear of the snowmobile and reduce

your speed to a minimum. Apply just enough throttle to keep the clutch engaged,

allowing the engine's compression to help slow the snowmobile and keep it from

rolling freely downhill.

WARNING

When driving on long downhill stretches, pump the brakes. Riding the brakes

may cause the brake system to overheat, which may result in brake failure.

Excessive or repetitive use of the brakes for high speed stops will also cause

an overheated brake system. This condition may lead to a sudden loss of

brakes and/or fire and may result in serious injury or death.

DRIVING IN HILLY TERRAIN

WARNING

Climbing a hill or crossing the face of a slope may result in loss of balance and

snowmobile rollover, causing serious injury or death. Use caution and good

judgement when driving in hilly terrain.

Use extra caution when operating in hilly terrain. If climbing a hill is unavoidable,

keep your weight low and forward. If you must cross the face of a slope, keep

your weight on the uphill side of the snowmobile to maintain proper balance and

avoid possible roll-over.

Slow down when reaching the crest of a hill. Be prepared to react to obstacles,

sharp drops or other people or vehicles that may be on the other side of the hill.

If you're unable to continue up a hill, turn the snowmobile downhill before it loses

momentum. If this isn't possible, spin the track just enough to dig in to prevent it

from rolling back down the hill. Stop the engine and set the parking brake (if

equipped). Keeping away from the downhill side of the snowmobile, pull the rear

of the snowmobile around and point the front end and skis downhill. Remount

the snowmobile, restart the engine, release the parking brake, and descend the

hill carefully.

SAFETY

DRIVE BELT

Do not operate the engine with the drive belt removed.

Any servicing that requires operation without a belt can be performed by your

dealer.

WARNING

Operation of the engine with the belt removed may result in injury or damage to

the engine.

INTAKE SILENCER

Do not operate the engine with the intake silencer or filter removed.

NOTICE

Damage to the engine may occur if the intake silencer or filter are removed.

CLUTCHES

Do not attempt to service the clutches.

All clutch service can be performed by your dealer. The clutch is a complex

mechanism that rotates at high speeds. Each clutch is dynamically balanced

before installation. Any tampering may disrupt this precision balancing and

create an unstable condition.

COLD WEATHER DRIVE-AWAY

Whenever your snowmobile has been parked for a length of time, especially

overnight, always make sure the skis and track are loosened from ice and snow

before attempting to drive. Apply the throttle with enough authority to put the

snowmobile into motion, but always operate within safety limits.

On 2-up machines, always operate with respect for a passenger.

MANEUVERABILITY

While much control and maneuverability is achieved through the steering

system and skis, maximum control is achieved by the shifting of your body

weight. Maneuverability will change based on rider weight and foot position on

running boards.

SAFETY

DRIVING RESPONSIBLY

Every snowmobile handles differently, and even the most docile conditions may

become dangerous if operators drive improperly. If you're new to snowmobiling,

acquaint yourself with the snowmobile and with what it will and won't do under

various conditions. Even seasoned drivers should spend some time getting the

feel for a snowmobile before attempting ambitious maneuvers.

• A snowmobile depends on the rider's body position for proper balance in

executing turns, traversing hills, etc. Always start on a smooth, level area to

begin building your operating experience.

• Before allowing someone else to use your snowmobile, know the extent of

their operating skills. Check to see if they've taken a snowmobile safety

course and have an operator's certificate. For their protection, as well as

yours, make sure they take a snowmobile safety course. Everyone can

benefit from the course.

• Don't “jump” your snowmobile over large drifts or similar terrain. Jumping may

injure your back because of spinal compression that could occur when the

snowmobile impacts the ground. The seat and suspension of your

snowmobile have been designed to provide protection under normal riding

conditions. Your snowmobile is not intended for this kind of use.

• Be courteous to oncoming traffic by dimming your headlights and reducing

your speed.

• When traveling in a group of snowmobiles, don't tailgate (follow too closely).

Leave enough distance between snowmobiles to provide ample stopping

room and to provide protection from flying snow and debris. Allow even more

distance when driving on slippery surfaces or when driving in darkness or

other low visibility conditions. Be aware of any snowmobile traffic around your

vehicle. Drive defensively to avoid accidents.

• Remove the key from the ignition when you leave the snowmobile

unattended.

SAFETY

WINDCHILL/TEMPERATURE CHARTS

The following information is provided to help you determine when temperatures

become dangerous for riding.

WINDCHILL CHART (°F)

Wind

Speed

in MPH

Actual Thermometer Reading (°F)

40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45

Equivalent Temperature (°F)

Calm 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45

5 36 31 25 19 13 7 1 -5 -11 -16 -22 -28 -34 -40 -46 -52 -57 -63

10 34 27 21 15 9 3 -4 -10 -16 -22 -28 -35 -41 -47 -53 -59 -66 -72

15 32 25 19 13 6 0 -7 -13 -19 -26 -32 -39 -45 -51 -58 -64 -71 -77

20 30 24 17 11 4 -2 -9 -15 -22 -29 -35 -42 -48 -55 -61 -68 -74 -81

25 29 23 16 9 3 -4 -11 -17 -24 -31 -37 -44 -51 -58 -64 -71 -78 -84

30 28 22 15 8 1 -5 -12 -19 -26 -33 -39 -46 -53 -60 -67 -73 -80 -87

35 28 21 14 7 0 -7 -14 -21 -27 -34 -41 -48 -55 -62 -69 -76 -82 -89

40 27 20 13 6 -1 -8 -15 -22 -29 -36 -43 -50 -57 -64 -71 -78 -84 -91

45 26 19 12 5 -2 -9 -16 -23 -30 -37 -44 -51 -58 -65 -72 -79 -86 -93

50 26 19 12 4 -3 -10 -17 -24 -31 -38 -45 -52 -60 -67 -74 -81 -88 -95

55 25 18 11 4 -3 -11 -18 -25 -32 -39 -46 -54 -61 -68 -75 -82 -89 -97

60 25 17 10 3 -4 -11 -19 -26 -33 -40 -48 -55 -62 -69 -76 -84 -91 -98

Frostbite in >> 30 min. 10 min. 5 min.

WINDCHILL CHART (°C)

Wind

Speed

in Km/h

Actual Thermometer Reading (°C)

5 2 -1 -4 -7 -10 -13 -16 -19 -22 -25 -28 -31 -34 -37 -40 -43 -46

Equivalent Temperature (°C)

Calm 5 2 -1 -4 -7 -10 -13 -16 -19 -22 -25 -28 -31 -34 -37 -40 -43 -46

8 3 0 -4 -7 -11 -14 -18 -22 -25 -29 -32 -36 -39 -43 -46 -50 -53 -57

16 2 -2 -6 -10 -13 -17 -21 -24 -28 -32 -36 -39 -43 -47 -50 -54 -58 -62

24 1 -3 -7 -11 -15 -19 -22 -26 -30 -34 -38 -42 -45 -49 -53 -57 -61 -65

32 0 -4 -8 -12 -16 -20 -24 -28 -32 -36 -39 -43 -47 -51 -55 -59 -63 -67

40 -1 -5 -9 -13 -17 -21 -25 -29 -33 -37 -41 -45 -49 -53 -57 -61 -65 -69

48 -1 -5 -9 -13 -18 -22 -26 -30 -34 -38 -42 -46 -50 -54 -58 -62 -66 -70

56 -2 -6 -10 -14 -18 -22 -26 -31 -35 -39 -43 -47 -51 -55 -59 -64 -68 -72

64 -2 -6 -10 -15 -19 -23 -27 -31 -35 -40 -44 -48 -52 -56 -61 -65 -69 -73

72 -2 -7 -11 -15 -19 -23 -28 -32 -36 -40 -45 -49 -53 -57 -61 -66 -70 -74

80 -3 -7 -11 -15 -20 -24 -28 -33 -37 -41 -45 -50 -54 -58 -62 -67 -71 -75

88 -3 -7 -12 -16 -20 -24 -29 -33 -37 -42 -46 -50 -55 -59 -63 -67 -72 -76

SAFETY

96 -3 -8 -12 -16 -21 -25 -29 -34 -38 -42 -47 -51 -55 -60 -64 -68 -73 -77

Frostbite in >> 30 min. 10 min. 5 min.

SAFETY LABELS AND LOCATIONS

Warning labels are placed on the snowmobile for your protection. Read and

follow the instructions of the labels and warnings on the snowmobile carefully. If

any of the labels depicted in this manual differ from the labels on your

snowmobile, always read and follow the instructions of the labels on the

snowmobile.

If any label becomes illegible or comes off, contact your POLARIS dealer to

purchase a replacement. Replacement safety labels are provided by POLARIS

at no charge. The part number is printed on the label.

INDY

SWITCHBACK

VOYAGEUR

NORDIC PRO

Clutch Warning

General Warning

Moving Parts Warning

Hot Surface Warning

SAFETY

HOT SURFACE CAUTION

WARNING

Hot Surface. DO NOT touch. Burns may result.

Part Number: 7300117.

SAFETY

FEATURES

COMPONENT LOCATIONS

NOTICE

The figures below are for reference only. Your model may differ slightly.

Skis

Nosepan

Front Bumper

Hood

Headlight

Windshield

Handlebar

Fuel Cap

Operator Seat

Taillight

Rear Bumper

Snow Flap

Spindle

Front Suspension

Upper Control Arm

Lower Control Arm

Front Track Shock

Rear Track Shock

Rail

FEATURES

IGNITION SWITCH

The ignition switch has three positions: OFF, RUN, and START.

OFF Vehicle / Display power off

RUN Vehicle / Display power on

START Activates starter motor

(if equipped)

If equipped with electric start,

turn the key to START to crank

the engine. When released, the

key automatically returns to the

RUN position.

NOTICE

If the key remains in the RUN position after using the engine stop switch to

stop the engine, the 7S Display will remain active. The screen will turn off after

several minutes of inactivity, but if a battery is installed, the display will

continue to draw a small amount of current from the battery until the key is

turned off. This feature is useful for accessing Ride Command without starting

the engine, but turn the key off when the display is not in use.

The 7S Display is not dependent on a battery while the engine is running. This

allows the 7S to remain fully powered and retain GPS lock during a successful

PERC event (forward/reverse transition). When the engine is shut off, the

display will immediately power down.

For vehicles equipped with a battery, the 7S Display will remain fully powered

(battery installed) for 60 seconds when the key remains in the RUN position

after Engine Stop Switch is depressed. The display will power off automatically

after 10 minutes of inactivity.

FEATURES

12-VOLT DC POWER RECEPTACLE

NOTICE

The 12-volt DC power receptacle and the jumper harness required to connect

the receptacle to the hood wiring harness can be purchased from your

POLARIS dealer.

If equipped, the 12-volt DC power receptacle is

located on the hood next to the instrument cluster.

The 12-volt power receptacle is protected by a 2

amp mini blade fuse located the fuse block, or in a

protective bag above the clutch cover. Use of the

12-volt DC power receptacle is recommended for

connecting power-sensitive devices such as GPS

units and cell phones.

12-VOLT RCA POWER SOURCES

Some rider accessories require the use of an RCA power adapter. If your model

is not equipped with an RCA power plug, an accessory 12-volt RCA adapter or

RCA power plug can be purchased from your POLARIS dealer.

12-VOLT RCA ADAPTER

The RCA adapter can be used if

your model is equipped with the

12-volt DC power receptacle.

Plug the adapter into the

receptacle to convert it to a 12-

volt RCA power outlet.

FEATURES

TOOLS

The belt removal L-wrench tool, spare belt, spark plug, and spark plug tool

container are located behind the left engine compartment panel.

NOTICE

Spare belt and spark plugs are not provided with the snowmobile.

L-WRENCH

When properly engaged in the bracket,

the L-wrench q

secures the fender to

the console. To retrieve the L-wrench,

rotate it counter-clockwise and slide it

upward from the bracket. Return the L-

wrench to the bracket and rotate it

clockwise when it’s not in use.

SPARK PLUG WRENCH

The spark plug wrench secures the spare belt/spark plug tool container to the

front bumper. Remove the container to add or access a spare spark plug or belt.

REPLACEMENT DRIVE BELT

To insert a replacement drive belt into the spare drive belt container, do the

following:

1. Rotate the spark plug wrench counter-clockwise to release it from the

bracket.

2. Pull the wrench upward to remove it.

3. Tilt the container until the bracket detaches from the bumper tube.

4. Pull the container out of the compartment.

5. When placing a drive belt into the container, fold the belt as shown. Verify

that the belt loop at the rear of the container is positioned slightly higher than

the front loop.

6. Slide the container into the engine compartment at an angle.

7. Position the container bracket onto the bumper tube and rotate it downward.

8. Reinstall the spark plug wrench into the bracket and through the hole in the

bumper tube.

9. Rotate the spark plug wrench clockwise until it locks into place.

FEATURES

CARGO STORAGE

Never hang heavy items or fuel

containers from the rear of the tunnel.

Cargo may be stowed only in the tunnel

storage bag (if equipped) or under the

seat.

The maximum weight capacity for the

tunnel is 15 lbs. (7 kg). Include the

weight of the cargo bag when

determining cargo weight.

NOTICE

Exceeding the tunnel cargo weight capacity could result in tunnel and or

suspension pad damage. Do not exceed the weight limit.

RAIL SCRATCHERS

Some models are equipped with rail scratchers to help prevent overheating

when riding on ice or hard-packed snow.

NOTICE

Do not install accessory bogie wheels on the inside of the rail beams if your

model is equipped with a remote reservoir rear track shock or damage will

occur. The rail scratchers must be removed as they interfere with the

accessory bogie wheels.

ACCESSORIES

POLARIS offers a wide range of accessories for your snowmobile to help make

each ride more enjoyable.

Use only POLARIS parts and accessories on your POLARIS snowmobile. Use

of unapproved parts and accessories may result in:

• Non-compliance with government/industry requirements

• Voiding of warranty

• Injury to self or others

This applies to, but is not limited to the following areas: brakes, clutches, fuel

systems, and exhaust systems. Exhaust systems are critical safety areas that

must use approved POLARIS parts. Please see your POLARIS dealer for

service.

FEATURES

DETONATION ELIMINATION TECHNOLOGY

(DET)

When DET senses and takes action to reduce detonation, the driver may notice

a drop in engine RPM and/or reduced performance.

The ECU will illuminate the check engine LED and display “DETONATION” on

the LCD screen whenever the DET system is active.

If the ECU determines the detonation cannot be controlled by normal means,

and further operation may cause engine damage, the check engine LED will

flash, the instrument clusters will display “DETONATION” and the ECU will

either limit the maximum engine speed or turn off the engine.

If the ECU limits RPM, the limit will remain active until the driver stops and

restarts the engine.

NOTICE

The most likely causes of severe detonation are outlined in the troubleshooting

table on page 244.

DETONATION PROTECTION MODES

Check Engine LED/Gauge Display Protection Mode

650 Models

LED illuminated / “DETONATION”

displayed

Slight drop in engine RPM/power

LED flashing / “DETONATION” displayed Engine shut-off

850 Models

LED illuminated / “DETONATION”

displayed

Slight drop in engine RPM/power

LED flashing / “DETONATION” displayed Exhaust valves close to reduce engine

RPM/power. Restart engine to reset.

FEATURES

NOTICE

The instrument cluster alert indicates which cylinder is experiencing

detonation.

FEATURES

GAUGE

STANDARD INSTRUMENT CLUSTER

Check Engine

Engine Hot

Low Oil

Low Battery Voltage

Playback

Low Fuel

High Beam

Parking Brake

Reverse

Security

NOTICE

Certain products will damage the lens and other plastic surfaces. Do not use

alcohol to clean the instrument cluster. Immediately clean off any gasoline that

splashes on the instrument cluster.

FEATURES

INDICATOR CONDITION

The parking brake Indicator illuminates when the parking brake is

engaged. It will also illuminate when the service brake is in use.

The reverse indicator flashes when the transmission is in reverse.

The security indicator illuminates when the security system is

activated.

RIDER INFORMATION CENTER

The rider information center is located in the instrument cluster. The center

displays vehicle speed, engine speed, odometer, resettable trip meters (2), total

engine hours of operation, fuel level, engine temperature, and a diagnostic

display mode.

Setting changes must be made with the engine running or with the vehicle

set to display standard units of measurement for distance and temperature.

q Information Display Area - This area displays either engine speed or vehicle

speed (whichever is not displayed in the speed display), engine temperature and

maximum vehicle speed.

FEATURES

w Speed Display - The speed display area displays either vehicle speed or

engine speed.

e Fuel Gauge - Not available on all models. The segments of the fuel gauge

show the level of fuel in the fuel tank. When the last segment clears, a low fuel

warning is activated. All segments including the fuel icon will flash. Refuel

immediately.

NOTICE

The low fuel indicator and fuel level gauge on the Standard Instrument Cluster

are not supported on models with a fuel level gauge on the fuel cap.

TIP

If the fuel icon fails to display, an open or short circuit has occurred in the fuel

sensor circuit. See your dealer.

r Odometer/Engine Hour Display - This area displays the odometer, Trip A,

Trip B and engine hours.

INFORMATION DISPLAY AREA

This area displays either engine speed or vehicle speed (whichever is not

displayed in the speed display), engine temperature, maximum vehicle speed,

and speed or RPM. To change the display, press and release the MODE button

or the MODE switch until the desired item is displayed.

SPEED DISPLAY AREA

The speed display area displays either vehicle speed or engine speed. Vehicle

speed is displayed in either miles per hour (MPH) or kilometers per hour (km/h).

Engine speed is displayed in revolutions per minute (RPM).

1. To change which item displays, first make sure the information display area

is set to display either engine speed or vehicle speed.

2. Press and release the center button.

FUEL GAUGE (IF EQUIPPED)

The segments of the fuel gauge show the level of fuel in the fuel tank. When the

last segment clears, a low fuel warning is activated. All segments including the

fuel icon will flash. Refuel immediately.

NOTICE

The low fuel indicator and fuel level gauge on the Standard Instrument Cluster

are not supported on models with a fuel level gauge on the fuel cap.

FEATURES

4. Press and release the SET button twice.

PLAY will appear in the information display area.

5. Press and release the SET button to play the recorded data.

Once playback has concluded, REPLAY will appear in the information

display area.

6. Press and release the SET button to REPLAY recorded data.

7. Press and release the MODE button to end playback and return to the

Options Menu.

STANDARD/METRIC DISPLAY

The odometer and temperature displays can be viewed in either standard or

metric units of measurement. Both displays change if units are changed. The

new settings will remain until changed by the operator.

Change Method 1

1. Press and hold the center button on the instrument cluster to enter the

Options Menu.

2. Press and release the MODE button until engine temperature appears in the

information display area.

3. Press and release the SET button or SET switch to change units.

FEATURES

Change Method 2

1. Press and release the SET button or SET switch until the odometer appears

in the information display area.

2. Press and hold the SET button or SET switch until the units change.

SECURITY SYSTEM (IGNITION LOCK SYSTEM)

This system is an optional feature and will not function until it has been activated

by your authorized POLARIS dealer. If you have this feature activated, you can

lock the ignition to prevent unauthorized use when leaving the snowmobile

unattended. A locked system will limit engine speed to 3000 RPM, which

prevents clutch engagement, and the snowmobile will not move when throttle is

applied.

If you wish to use this feature, you must complete all four tasks on the following

pages to have your system activated and to change the security code to one of

your own choosing.

FIRST TIME USE OF YOUR SECURITY SYSTEM

Perform all tasks in the order shown if you wish to activate and use the optional

security system.

TASK 1: Activate the security system

See your authorized POLARIS dealer to have the optional security system

feature activated in the electronic control unit (ECU).

TASK 2: Lock the System the First Time

NOTICE

To lock the system for the first time, use code 000.

FEATURES

1. Press and hold the center button on the instrument cluster to enter the

Options Menu.

2. Press and release the MODE button until SECURITY OFF appears in the

information display area.

3. Press and release the SET button.

ENTER CODE will appear in the information display area.

4. Press and release the SET button to increase the 1st digit.

5. Press and hold the SET button to accept the 1st digit and advance to the 2nd

digit.

6. Press and release the SET button to increase the 2nd digit.

FEATURES

TASK 3: Unlock the System

NOTICE

To unlock the system for the first time, use code 000.

1. While the engine is running, Press and release the SET button.

ENTER CO will appear in the information display area.

2. Press and release the SET button to increase the 1st digit.

3. Press and hold the SET button to accept the 1st digit and advance to the 2nd

digit.

4. Press and release the SET button to increase the 2nd digit.

FEATURES

TASK 4: Enter Your New Security Code

1. Immediately after locking and unlocking the system, and while SECURE

OFF is displayed, simultaneously press and hold the MODE and SET

buttons.

SET NEW CODE will appear on the information display area.

2. Press and release the SET button to increase the 1st digit.

3. Press and hold the SET button to accept the 1st digit and advance to the 2nd

digit.

4. Press and release the SET button to increase the 2nd digit.

5. Press and hold the SET button to accept the 2nd digit and advance to the 3rd

digit.

FEATURES

LOCKING SYSTEM WITH PERSONAL SECURITY CODE

1. Start the engine.

2. Press and hold the center button on the instrument cluster to enter the

Options Menu.

3. Press and release the MODE button until SECURITY OFF appears in the

information display area.

4. Press and release the SET button.

ENTER CODE will appear in the information display area.

5. Press and release the SET button to increase the 1st digit.

6. Press and hold the SET button to accept the 1st digit and advance to the 2nd

digit.

FEATURES

7. Press and release the SET button to increase the 2nd digit.

8. Press and hold the SET button to accept the 2nd digit and advance to the 3rd

digit.

9. Press and hold the SET button to accept the 3rd digit and submit code.

If code is correct, SECURITY ON will appear in the information display area.

The system is now locked. Proceed immediately to Task 3.

If code is incorrect, BAD CODE will appear in the information display area.

Return to step 3 to re-enter code.

FEATURES

UNLOCKING SYSTEM WITH PERSONAL SECURITY

CODE

1. While the engine is running, Press and release the SET button.

ENTER CODE will appear in the information display area.

2. Press and release the SET button to increase the 1st digit.

3. Press and hold the SET button to accept the 1st digit and advance to the 2nd

digit.

4. Press and release the SET button to increase the 2nd digit.

5. Press and hold the SET button to accept the 2nd digit and advance to the 3rd

digit.

FEATURES

SECURITY SYSTEM ACCESS QUICK REFERENCE

Now that you have become familiar with the procedure for locking and unlocking

the system, use the chart below as a quick reference.

SECURITY SYSTEM ACCESS QUICK REFERENCE CHART

ACTION RESULT

1. Start engine

2. Press and hold the center

button

3. Press and release the SET button

until SECURITY appears in

information display area.

4. Press and release SET button.

Displays ENTER CODE (to lock

the system)

Press and release the SET button Advances a digit on the ENTER

CODE screen

Press and hold the SET button Accepts a digit and displays the

next digit position (if any remain)

on the ENTER CODE screen

While SECURITY OFF is shown on the

information display area, simultaneously

Press and hold the MODE and SET

button.

Allows user to change security

code.

DIAGNOSTIC DISPLAY MODE

The diagnostic display mode is for

informational purposes only. Your

POLARIS dealer can perform all major

repairs.

The diagnostic mode is accessible only

when the check engine warning

indicator is illuminated and a diagnostic

code is active.

Do not stop the engine if you want to view the active code (failure code). Active

codes cannot be retrieved if power is interrupted to the instrument cluster. The

codes will become inactive codes if power is interrupted. Inactive codes are

stored in the history of the unit. Please see your POLARIS dealer can help

retrieve inactive codes.

Use the following procedure to view active codes.

FEATURES

1. Do not stop the engine.

2. Press and hold the center button on the instrument cluster to enter the

Options Menu.

3. Press and release the MODE button until DIAGCODE appears in the

information display area. The Diagnostic display mode will appear in the

Options Menu if there is an active trouble code.

TIP

When the diagnostic mode is displayed, the check engine warning indicator will

begin to flash.

4. A set of two numbers will appear in the display.

• The 2-6 digit suspect parameter number (SPN) in the information display

area indicates which component is generating the fault code.

• The 1-2 digit failure mode indicator (FMI) number in the odometer area

indicates the fault mode, such as open or short circuit.

5. More than one fault may be active. Press and hold the SET button or SET

switch for two seconds to toggle to the next active code. Repeat until all

codes are retrieved.

6. See Diagnostic Trouble Codes for code definitions and failure descriptions.

FUEL TYPE SELECTION

When using the recommended 91 non-

ethanol gasoline, always select the 91

NON-ETHANOL setting. When using

ethanol, MTBE, or other forms of

oxygenated gasoline, the fuel type must

be changed to NON-PREMIUM/

ETHANOL in the gauge.

IMPORTANT

Whenever in doubt of your fuel purchase, use the NON-PREMIUM / ETHANOL

mode.

Use the following procedure to change the fuel type designation in the gauge.

Refer to the fuel type selection label located inside the left side panel.

FEATURES

ACTIVATE HEATED GRIPS

To activate the SmartWarmer

system in the handlebars, press

the Heated Grips button q on

the left hand controls. There are

four heat levels to choose from:

• Low

• Medium

• High

• Off

SET GRIP TEMPERATURE

The temperature of each heat level can be customized using your gauge or

hand controls. Use the following procedure to adjust the temperature of your

heated hand grips.

1. Start the engine.

2. Press and hold the center button to enter the Options Menu.

3. Press and release the MODE button until HEATERS is displayed in the

information display area.

Using the Gauge Buttons

1. Press and release the MODE button to select which SmartWarmer element

to customize: grips or thumb. Press the SET button to select.

2. Press and release the MODE button to choose a heat level: low, medium, or

high. Press the SET button to select.

3. Use the SET and MODE buttons to increase/decrease the temperature to

desired setting.

• MODE decreases the temperature.

• SET increases the temperature.

4. Press the Polaris button to lock in temperature.

5. Press the MODE button to advance to the next heat setting.

6. Repeat steps 3-5 for each setting: low, medium, and high.

7. Press the Polaris button to exit.

8. Press and release the SET or Polaris button to exit. The grips will adjust to

the temperatures of the new settings when the hand grip warmers are

enabled.

FEATURES

RIDE COMMAND DISPLAY

INTRODUCTION

Thank you for purchasing a RIDE COMMAND Display, and welcome to the

Polaris RIDE COMMAND App. This intuitive display gives you access to your

vehicle’s custom information and a variety of features.

For a safe and enjoyable riding experience with your new Display, please read

your vehicle’s owner’s manual and this Display owner’s manual. If you should

need additional assistance with Display operation or software updates, please

see your Polaris dealer or visit .polaris.com/ridecommand

For the latest information about your RIDE COMMAND Display, including

software updates, please visit .ridecommand.polaris.com

WARNING

Do not enter information while operating your vehicle. Failure to pay attention

to operating your vehicle could result in loss of control, injury, or death. You

assume all risks associated with using this device. Read your User Guide.

Always ride with the latest maps and trails data from https://ridecommand.

polaris.com/en-us/update .

BEFORE YOU RIDE

Before riding with your new display, do the following:

• Read this entire manual.

• Familiarize yourself with the features and operations of the Display while the

vehicle is stationary.

• Download the Polaris Ride Command App from the Apple® App store or the

Google Play® store and create your personalized Ride Command account.

• Check your display to ensure you have the appropriate maps and trails visible

for your area.

• Check https://www.polaris.com/en-us/owners-manuals/ for the latest updates

to the owner’s manual.

• Complete the pre-ride checklist.

NOTICE

Trails change often, and the trail data file is only considered valid for 90 days

after the release date. Please keep your trail data up to date. Download the

latest trails at http://ridecommand.polaris.com.

RIDE COMMAND DISPLAY

NOTICE

Using the display for an extended period of time while the vehicle’s engine is

off can drain the battery (if equipped).

DEVICE OPERATING REQUIREMENTS

Phone functionality is dependent on the capabilities of your cell phone.

NOTICE

Some cell phones or operating systems will not work as shown in this manual.

RIDE COMMAND DISPLAY

RIDE COMMAND BUTTONS

DISPLAY

BUTTON DESCRIP-

TION

FUNCTION

q5-Way UI

Control

Moves the cursor and pans the

focus on the map screen.

wBack Button Cycles all screens and backs

user out of menus.

eUp/Down

Buttons

Zooms in and out of map and

scrolls through lists of features.

rPolaris Button Opens and closes the Badge

Panel.

RIDE COMMAND DISPLAY

Product specificaties

Merk:	POLARIS
Categorie:	Niet gecategoriseerd
Model:	850 Indy VR1 129 (2022)

Heb je hulp nodig?

Als je hulp nodig hebt met POLARIS 850 Indy VR1 129 (2022) stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd POLARIS

POLARIS Ranger Crew 1000 (2021) Handleiding

14 December 2024

POLARIS 800 Pro-RMK 163 (2018) Handleiding

14 December 2024

POLARIS General 1000 Sport (2022) Handleiding

9 Juli 2023

POLARIS RANGER 570 HD (2023) Handleiding

4 Juli 2023

POLARIS Slingshot SLR (2023) Handleiding

2 Juli 2023

POLARIS Ranger XP 900 EPS (2017) Handleiding

1 Juli 2023

POLARIS RZR XP 4 1000 (2023) Handleiding

1 Juli 2023

POLARIS Sportsman X2 (2008) Handleiding

30 Juni 2023

POLARIS RZR Pro XP 4 Ultimate Rockford Fosgate LE (2021) Handleiding

28 Juni 2023

POLARIS RZR 570 (2019) Handleiding

27 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic Lumix DMW-AC11 Handleiding

9 April 2025

Soundstream VRN-64HBL Handleiding

9 April 2025

MOZA SR-P Handleiding

9 April 2025

Creality3D Ender-3 S1 Pro Handleiding

9 April 2025

Act AC6020 Handleiding

9 April 2025

BlueBuilt BBMA2M Handleiding

9 April 2025

Act AC6015 Handleiding

9 April 2025

Diamond Audio MSHD9813SG Handleiding

9 April 2025

Daikin ETVZ12S18EJ6V Handleiding

9 April 2025

Daikin FXFQ80AVEB Handleiding

9 April 2025