Planet WL-LTNA Handleiding

Planet Verlichting WL-LTNA

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet WL-LTNA (4 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Lightning Arrester

WL-LTNA

INSTALLATION GUIDE

Antenna

WL-LTNA

N-Type Cable

Ground

Please refer to the steps

below and the picture to

install WL-LTNA between

External Antenna and N-Type

Cable.

Step 1: Connect your

external Antenna to

WL-LTNA.

Step 2: Connect your N-type

cable to WL-LTNA.

Step 3: In the left side, you

can see a screw,

please use a low

impedance ground

cable to connect the

screw and ground.

EM-WL-LTN v1A

Lightning Arrester

WL-LTNA

INSTALLATION GUIDE

Antenna

WL-LTNA

N-Type Cable

Ground

Please refer to the steps

below and the picture to

install WL-LTNA between

External Antenna and N-Type

Cable.

Step 1: Connect your

external Antenna to

WL-LTNA.

Step 2: Connect your N-type

cable to WL-LTNA.

Step 3: In the left side, you

can see a screw,

please use a low

impedance ground

cable to connect the

screw and ground.

EM-WL-LTN v1A

Lightning Arrester

WL-LTNA

INSTALLATION GUIDE

Antenna

WL-LTNA

N-Type Cable

Ground

Please refer to the steps

below and the picture to

install WL-LTNA between

External Antenna and N-Type

Cable.

Step 1: Connect your

external Antenna to

WL-LTNA.

Step 2: Connect your N-type

cable to WL-LTNA.

Step 3: In the left side, you

can see a screw,

please use a low

impedance ground

cable to connect the

screw and ground.

EM-WL-LTN v1A

Lightning Arrester

WL-LTNA

INSTALLATION GUIDE

Antenna

WL-LTNA

N-Type Cable

Ground

Please refer to the steps

below and the picture to

install WL-LTNA between

External Antenna and N-Type

Cable.

Step 1: Connect your

external Antenna to

WL-LTNA.

Step 2: Connect your N-type

cable to WL-LTNA.

Step 3: In the left side, you

can see a screw,

please use a low

impedance ground

cable to connect the

screw and ground.

EM-WL-LTN v1A

Lightning Arrester

WL-LTNA

INSTALLATION GUIDE

Antenna

WL-LTNA

N-Type Cable

Ground

Please refer to the steps

below and the picture to

install WL-LTNA between

External Antenna and N-Type

Cable.

Step 1: Connect your

external Antenna to

WL-LTNA.

Step 2: Connect your N-type

cable to WL-LTNA.

Step 3: In the left side, you

can see a screw,

please use a low

impedance ground

cable to connect the

screw and ground.

EM-WL-LTN v1A

Lightning Arrester

WL-LTNA

INSTALLATION GUIDE

Antenna

WL-LTNA

N-Type Cable

Ground

Please refer to the steps

below and the picture to

install WL-LTNA between

External Antenna and N-Type

Cable.

Step 1: Connect your

external Antenna to

WL-LTNA.

Step 2: Connect your N-type

cable to WL-LTNA.

Step 3: In the left side, you

can see a screw,

please use a low

impedance ground

cable to connect the

screw and ground.

EM-WL-LTN v1A

Lightning Arrester

WL-LTNA

INSTALLATION GUIDE

Antenna

WL-LTNA

N-Type Cable

Ground

Please refer to the steps

below and the picture to

install WL-LTNA between

External Antenna and N-Type

Cable.

Step 1: Connect your

external Antenna to

WL-LTNA.

Step 2: Connect your N-type

cable to WL-LTNA.

Step 3: In the left side, you

can see a screw,

please use a low

impedance ground

cable to connect the

screw and ground.

EM-WL-LTN v1A

Lightning Arrester

WL-LTNA

INSTALLATION GUIDE

Antenna

WL-LTNA

N-Type Cable

Ground

Please refer to the steps

below and the picture to

install WL-LTNA between

External Antenna and N-Type

Cable.

Step 1: Connect your

external Antenna to

WL-LTNA.

Step 2: Connect your N-type

cable to WL-LTNA.

Step 3: In the left side, you

can see a screw,

please use a low

impedance ground

cable to connect the

screw and ground.

EM-WL-LTN v1A

Warning:

1. Please look over the site before beginning any

installation, and anticipate possible hazards.

2. Try to keep the antenna connection leave the

power line away. People may be injured or

killed if they are touching or holding any part

of equipment when it contacts power lines.

3. Make sure all towers and masts are securely

grounded, and electrical cables connected to

antennas have grounded lightning arrestors.

4. Do not connect when a storm is near or when

transmissions are occurring.

Specication:

Type: Gas Discharged

Frequency: 0~6GHz

Gain Loss: Less then 0.5dB

Maximum withstand current: 20KA

Connector Type: N male to N female

PLANET Technology Corp.

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-22199518 Fax: 886-2-22199528

http://www.planet.com.tw

Warning:

1. Please look over the site before beginning any

installation, and anticipate possible hazards.

2. Try to keep the antenna connection leave the

power line away. People may be injured or

killed if they are touching or holding any part

of equipment when it contacts power lines.

3. Make sure all towers and masts are securely

grounded, and electrical cables connected to

antennas have grounded lightning arrestors.

4. Do not connect when a storm is near or when

transmissions are occurring.

Specication:

Type: Gas Discharged

Frequency: 0~6GHz

Gain Loss: Less then 0.5dB

Maximum withstand current: 20KA

Connector Type: N male to N female

PLANET Technology Corp.

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-22199518 Fax: 886-2-22199528

http://www.planet.com.tw

Warning:

1. Please look over the site before beginning any

installation, and anticipate possible hazards.

2. Try to keep the antenna connection leave the

power line away. People may be injured or

killed if they are touching or holding any part

of equipment when it contacts power lines.

3. Make sure all towers and masts are securely

grounded, and electrical cables connected to

antennas have grounded lightning arrestors.

4. Do not connect when a storm is near or when

transmissions are occurring.

Specication:

Type: Gas Discharged

Frequency: 0~6GHz

Gain Loss: Less then 0.5dB

Maximum withstand current: 20KA

Connector Type: N male to N female

PLANET Technology Corp.

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-22199518 Fax: 886-2-22199528

http://www.planet.com.tw

Warning:

1. Please look over the site before beginning any

installation, and anticipate possible hazards.

2. Try to keep the antenna connection leave the

power line away. People may be injured or

killed if they are touching or holding any part

of equipment when it contacts power lines.

3. Make sure all towers and masts are securely

grounded, and electrical cables connected to

antennas have grounded lightning arrestors.

4. Do not connect when a storm is near or when

transmissions are occurring.

Specication:

Type: Gas Discharged

Frequency: 0~6GHz

Gain Loss: Less then 0.5dB

Maximum withstand current: 20KA

Connector Type: N male to N female

PLANET Technology Corp.

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-22199518 Fax: 886-2-22199528

http://www.planet.com.tw

Warning:

1. Please look over the site before beginning any

installation, and anticipate possible hazards.

2. Try to keep the antenna connection leave the

power line away. People may be injured or

killed if they are touching or holding any part

of equipment when it contacts power lines.

3. Make sure all towers and masts are securely

grounded, and electrical cables connected to

antennas have grounded lightning arrestors.

4. Do not connect when a storm is near or when

transmissions are occurring.

Specication:

Type: Gas Discharged

Frequency: 0~6GHz

Gain Loss: Less then 0.5dB

Maximum withstand current: 20KA

Connector Type: N male to N female

PLANET Technology Corp.

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-22199518 Fax: 886-2-22199528

http://www.planet.com.tw

Warning:

1. Please look over the site before beginning any

installation, and anticipate possible hazards.

2. Try to keep the antenna connection leave the

power line away. People may be injured or

killed if they are touching or holding any part

of equipment when it contacts power lines.

3. Make sure all towers and masts are securely

grounded, and electrical cables connected to

antennas have grounded lightning arrestors.

4. Do not connect when a storm is near or when

transmissions are occurring.

Specication:

Type: Gas Discharged

Frequency: 0~6GHz

Gain Loss: Less then 0.5dB

Maximum withstand current: 20KA

Connector Type: N male to N female

PLANET Technology Corp.

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-22199518 Fax: 886-2-22199528

http://www.planet.com.tw

Warning:

1. Please look over the site before beginning any

installation, and anticipate possible hazards.

2. Try to keep the antenna connection leave the

power line away. People may be injured or

killed if they are touching or holding any part

of equipment when it contacts power lines.

3. Make sure all towers and masts are securely

grounded, and electrical cables connected to

antennas have grounded lightning arrestors.

4. Do not connect when a storm is near or when

transmissions are occurring.

Specication:

Type: Gas Discharged

Frequency: 0~6GHz

Gain Loss: Less then 0.5dB

Maximum withstand current: 20KA

Connector Type: N male to N female

PLANET Technology Corp.

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-22199518 Fax: 886-2-22199528

http://www.planet.com.tw

Warning:

1. Please look over the site before beginning any

installation, and anticipate possible hazards.

2. Try to keep the antenna connection leave the

power line away. People may be injured or

killed if they are touching or holding any part

of equipment when it contacts power lines.

3. Make sure all towers and masts are securely

grounded, and electrical cables connected to

antennas have grounded lightning arrestors.

4. Do not connect when a storm is near or when

transmissions are occurring.

Specication:

Type: Gas Discharged

Frequency: 0~6GHz

Gain Loss: Less then 0.5dB

Maximum withstand current: 20KA

Connector Type: N male to N female

PLANET Technology Corp.

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-22199518 Fax: 886-2-22199528

http://www.planet.com.tw

Product specificaties

Merk:	Planet
Categorie:	Verlichting
Model:	WL-LTNA
Gewicht:	87 g
Breedte:	22 mm
Diepte:	68 mm
Hoogte:	25 mm
Verlies van insertion:	0.5 dB
Voltage Standing Wave Ratio (VSWR):	0 ~ 5GHz 1:1.5 / 5 ~ 6GHz 1:2.0
Insulatie weerstand:	1000 MΩ
Impulse breakdown voltage:	600 V