Planet GT-805A-PD Handleiding

Planet Niet gecategoriseerd GT-805A-PD

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet GT-805A-PD (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Your GT-805A-PD carton should contain the following items:

The Gigabit Ethernet PoE PD Media

Converter x 1 User’s Manual x 1

If any item is missing or damaged, please consult the dealer

from whom you purchased your Gigabit Ethernet PoE PD Media

converter.

Note

The GT-805A-PD comes with one vacant SFP

module slot. The mini GBIC SFP module is not

bundled in the package.

Mechanical

DIP switch for LFP function (Disable/Enable) setting

LED indicators for easy network diagnostics

Wall mounting or DIN-rail installation

Compact in size, easy installation

Two power input designs (IEEE 802.3af/at/bt 48V~54V DC

in-line power or optional 5V DC input)

Compact size for working with PLANET MC family media

chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)

3.3 Rear View

The rear panel of the Gigabit Ethernet PoE PD media converter

comes with one DC jack, which accepts input power of 5V DC

2A.

5V DC

Figure 2: GT-805A-PD Rear View

Power

Notice

The default package of Gigabit Ethernet PoE PD

media converter does not include DC 5V power

adapter. If you need this DC 5V power adapter,

please contact your local dealer or distributor for

more assistance.

3.2 LED Indication

 System

LED Color Function

PWR Green

Lit To indicate that the Gigabit Ethernet

PoE PD media converter has power.

O To indicate that the power is not

detected.

 100/1000BASE-X SFP Slot

LED Color Function

Fiber

LNK/

ACT

Green

Lit To indicate the link through ber port

is successfully established.

Blink To indicate the ber port is actively

sending or receiving data.

O To indicate that the ber optic port is

linked down.

2. Product Features

Physical Port

Media conversion between 10/100/1000BASE-T and

100BASE-FX/1000BASE-SX/LX

TP Port supports 802.3af/at/bt PoE 48V-54V DC in-line-

power

TP port supports 10/100/1000BASE-T auto-negotiation and

auto-MDI/MDI-X.

Fiber media allows

- Multi-mode ber using LC connector

- Single-mode ber using LC connector

Power over Ethernet

Compatible with IEEE 802.3bt Power over Ethernet plus

plus end-span + mid-span PSE

Compatible with IEEE 802.3at Power over Ethernet plus

end-span/mid-span PSE

Backward compatible with IEEE 802.3af Power over

Ethernet

Layer 2 Features

Store-and-Forward mechanism

Non-blocking full wire-speed forwarding rate

IEEE 802.1Q Tag VLAN transparent, multicast pass

through

9K jumbo frame

IEEE 802.3x full-duplex and half-duplex back-pressure

ow control to eliminate the loss of packets

3. Hardware Description

3.1 Front View

There are one RJ45 twisted-pair jack (auto-MDI/MDI-X) with

one “PoE In” LED indicator, one 100/1000X SFP ber-optic

slot, four LED indicators and one DIP switch for Link-Fault

Passthrough (LFP) feature.

When the DIP switch is turned on, the LLCF and LLR are

activated.

ACT

LNK

100/1000X

10/100/1000T

PoE In

PWR 1000

LFP

OFF

TPFiber

LNK/ACT

Figure 1: GT-805A-PD Front View

Power

Notice

The Gigabit Ethernet PoE PD media converter

provides two power input systems, IEEE 802.3af/

at/bt 48V~54V DC in-line power via 10/100/1000T

RJ45 port or optional 5V DC input via DC jack

on the rear panel.

 10/100/1000BASE-T Port

LED Color Function

LNK/

ACT Green

Lit To indicate the link through TP port is

successfully established.

Blink To indicate the port is actively

sending or receiving data.

O To indicate that the copper port is

linked down.

1000

LNK/

ACT

Green

Lit To indicate that the copper port is

operating at 1000Mbps.

Blink

To indicate the port is actively

sending or receiving data at

1000Mbps.

O

To indicate that the copper port

is linked down or operating at

10/100Mbps.

PoE

In Amber

Lit To indicate the RJ45 port is receiving

the PoE power.

O

To indicate the connected device is

not a PoE power sourcing equipment

(PSE).

3.4 Power Information

The power jack of Gigabit Ethernet PoE PD media converter

measures 2.5mm in the central post and requires +5VDC

power input. It conforms to the bundled AC-DC adapter and

PLANET’s media chassis. Should you have the issue of power

connection, please contact your local sales representative.

2.5mm

DC Receptacle 2.5mm

+5V for each slot

DC receptacle is 2.5mm wide that conforms to the Gigabit

Ethernet PoE PD media converter’s 2.5mm DC jack's

central post. Do not install any improper unit.

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

4. Link Fault Pass-through (LFP)

It includes the Link Fault Passthrough (LFP) function and the

DIP switch. The LFP function includes the Link Loss Carry

Forward (LLCF) and Link Loss Return (LLR). LLCF and LLR can

immediately alert administrators the issue of the link media

and provide ecient solution to monitor the network. The DIP

Switch will disable or enable the LFP function.

LLCF means when a device is connected to the converter and

the TP line loses the link, the converter’s ber will disconnect

transmission link. LLR (Link Loss Return) means when a device

is connected to the converter and the ber line loses the link,

the converter’s ber will disconnect transmission link.

Note

LFP function is ON by default setting. If you

are familiar with the network installation and

for diagnostic purpose (i.e. check which end

is broken), you can turn it off and reset the

converter to make it take effect. Otherwise, please

keep it in the default position.

Step 2: Connect a standard Cat5e/6 UTP cable from power

source equipment , such as PoE switch, PoE (PSE)

injector hub and single port PoE injector, to the “PoE

IN” port of the GT-805A-PD.

6. Cable Connection Parameter

The wiring details are shown below:

Duplex Connection Limitation (max.)

Twisted Pair

Half/Full Node to Node

Node to Switch/Hub 100 meters

Fiber Optic Cables:

Standard

(Wavelength)

100BASE-FX

(1310nm)

1000BASE-SX

(850nm)

1000BASE-LX

(1310nm)

Fiber Type & Cable

Specications

Multi-mode 50/125μm or 62.5/125μm

Single-mode 9/125μm

5. Installation

5.1 Before Installation

The GT-805A-PD is installed with the PSE (power source

equipment); it is powered by PSE and forwards the Ethernet

data to the remote media converter. The GT-805A-PD doesn’t

require an external power supply and it can be installed easily

by just plug and play without aecting the data transmission

performance.

Note

1. To provide you with better PoE power and data

extension quality, we strongly recommend that

you use when installing the “Solid UTP Cable”

GT-805A-PD.

2. The GT-805A-PD can be installed with a third-

party device if the device complies with IEEE

802.3af/at/bt standard.

5.2 Connecting GT-805A-PD to Power Source

Equipment (PSE)

This section describes how to install GT-805A-PD and make

connection to it. Please read the following topics and perform

the procedures in the order being presented.

The “RJ45 PoE IN” port functions as "PoE (Data and

Power) input".

Step 1: Slide in the SFP transceiver module and connect ber

cable from the GT-805A-PD to the ber network.

7.ProductSpecications

Model GT-805A-PD

Hardware Specications

Copper Port 10/100/1000BASE-T Ethernet TP RJ45

port (auto-MDI/MDI-X) twisted pair

Fiber Port 100/1000BASE-X

Fiber Port Type

(connector) SFP (LC)

Copper Maximum

Distance 100m

Fiber Maximum

Distance Vary by SFP Transceiver

LED Indicator

System: Power x 1 (Green)

TP LINK/ACT, 1000 LINK/ACT (Green).

PoE In (Amber)

Fiber LINK/ACT (Green)

DIP Switch LFP function (Disable/Enable) setting

Power

Consumption 2 watts/6.8 BTU (maximum)

Power

Requirements

IEEE 802.3af/at/bt PoE 48V-54V DC

in-line-power or optional DC 5V/2A

external power adapter

(Not included in standard package)

Dimensions

(W x D x H) 70 x 94 x 26 mm

Weight 186g

Converter Specications

Speed

Twisted-pair:

10/20Mbps for half/full duplex

100/200Mbps for half/full duplex

2000Mbps for full duplex

Fiber-optic:

200Mbps for full duplex

2000Mbps for full duplex

Network Cables

Twisted-pair:

10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to

100m

100BASE-TX: 2-pair UTP Cat. 5, up to

100m

1000BASE-T: 4-pair STP Cat. 5, up to

100m

Fiber-optic Cable

1000BASE-SX:

50/125μm or 62.5/125μm multi-mode

ber cable, up to 220/550m/2km.

1000BASE-LX:

9/125μm single-mode cable, providing

long distance for 2/10/20/40/80/120km

(vary on SFP module)

100BASE-FX:

50/125μm or 62.5/125μm multi-mode

ber cable for up to 2km

(vary on SFP module)

9/125μm single-mode cable for

20/40/60/120km (vary on SFP module)

Jumbo Packet Size 9K

Standard Conformance

Standards

Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/100BASE-FX

IEEE 802.3ab 1000BASE-T

IEEE 802.3z 1000BASE-SX/LX

IEEE 802.3x full-duplex and half-duplex

back-pressure ow control to eliminate

packet loss

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3bt 4-pair Power over Ethernet

Plus Plus (Type 3)

IEEE 802.3bt 4-pair Power over Ethernet

Plus Plus (Type 4)

Regulatory

Compliance FCC Part 15 Class A, CE

Environment

Operating

Temperature 0 ~ 50 degrees C

Storage

Temperature -10 ~ 70 degrees C

Operating

Humidity

5 ~ 95%, relative humidity,

non-condensing

Storage Humidity 5 ~ 95%, relative humidity,

non-condensing

Product specificaties

Merk:	Planet
Categorie:	Niet gecategoriseerd
Model:	GT-805A-PD
Kleur van het product:	Zwart
Gewicht:	186 g
Breedte:	70 mm
Diepte:	94 mm
Hoogte:	26 mm
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	FCC Part 15 Class A, CE
Netwerkstandaard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Temperatuur bij opslag:	-10 - 70 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Ethernet interface type:	Gigabit Ethernet
Maximale overdrachtssnelheid van gegevens:	2000 Mbit/s
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Ja
Jumbo Frames ondersteuning:	Ja
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Jumbo frames:	9000
Vezel-optische connector:	SFP
Fibre channel-poorten:	1
Fiber ethernet cabling technologie:	100BASE-FX, 1000BASE‑LX, 1000BASE‑SX