Planet FSD-504HP Handleiding

Planet Schakelaar FSD-504HP

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet FSD-504HP (4 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Check the following contents of your package:

 Fast Ethernet High Power PoE Switch x 1

 User's Manual x 1

 Power Adapter x 1

 Power Cord x 1

 Rubber Feet x 4

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them

again to repack the product in case there is a need to

return it to us for repair.

4. LED Indicators

 System

LED Color Function

PWR Green Light: Indicates the Switch has

power.

 Per 10/100Mbps Port

LED Color Function

PoE Orange

Light: Indicates the port is

providing 48V DC in-line

power.

LNK/ACT Green

Light: Indicates the link

through that port is

successfully established

at 10/100Mbps.

Blink: Indicates that the Switch

is actively sending or

receiving data over that

port.

2. Product Features

 RJ-45 Interface

Five 10/100Mbps Fast Ethernet ports

 4 ports support 48V DC power to PoE Powered

Device

 Power over Ethernet

 Complies with IEEE 802.3af / at Power over

Ethernet Mid-Span PSE

 Up to 4 IEEE 802.3af / at devices powered

 Supports PoE Power up to 30 watts for each PoE

port

 60 watts PoE Budget

 Auto detects powered device (PD)

 Circuit protection prevents power interference

between ports

 Remote power feeding up to 100m

 Switching

 Hardware based 10/100Mbps Auto-Negotiation and

Auto MDI/MDI-X

 Flow control for Full Duplex operation and back

pressure for Half Duplex operation

 1536Bytes packet size support

 Integrates address look-up engine, supporting 1K

absolute MAC addresses

 Automatic address learning and address aging

 Hardware

 Desktop palm size

 LED indicators for PoE ready / activity and LINK /

ACT

 One DC 48V power jack

5. Switch Rear Panel

Figure 5-1 shows the rear panel of FSD-504HP.

Figure 5-1: FSD-504HP Rear Panel

Power

Notice

1. The device is a power-required device,

meaning it will not work till it is powered.

If your networks should be active all the

time, please consider using UPS (Uninter-

rupted Power Supply) for your device. It

will prevent you from network data loss

or network downtime.

2. In some area, installing a surge suppres-

sion device may also help to protect your

FSD-504HP from being damaged by un-

regulated surge or current to the FSD-

504HP or the power adapter.

3. Switch Front Panel

Figure 3-1 shows the front panel of FSD-504HP.

Figure 3-1: FSD-504HP Front Panel

6. Installing the Switch

This part describes how to install your Fast Ethernet

High Power PoE Switch and make connections to

it. Please read the following topics and follow the

procedures as presented.

Note

This Fast Ethernet High Power PoE Switch

does not need software configuration.

Desktop Installation

To install the Fast Ethernet High Power PoE Switch on

desktop, simply follow the following steps:

Step 1: Attach the rubber feet to the recessed areas

on the bottom of the Fast Ethernet High Power

PoE Switch.

Step 2: Place the Fast Ethernet High Power PoE Switch

on desktop near AC power source for its power

adapter.

Step 3: Keep enough ventilation space between the

Fast Ethernet High Power PoE Switch and the

surrounding objects.

Note

When choosing a location, please keep in

mind the environmental restrictions dis-

cussed in Chapter 7 -- Product Specifica-

tions.

Step 4: Connect your Fast Ethernet High Power PoE

Switch to network devices.

A. Connect one end of a standard network cable to

the 10/100Mbps RJ-45 ports on the back of the

Fast Ethernet High Power PoE Switch.

B. Connect the other end of the cable to the network

devices such as printer servers, workstations or

routers.

Step 5: Connect your Fast Ethernet High Power PoE

Switch to PoE PD devices.

A. Connect one end of a standard network cable to

port 2 to port 4 10/100Mbps RJ-45 ports on the

back of the Fast Ethernet High Power PoE Switch.

B. Connect the other end of the cable to the 802.3at

/ af powered devices.

Office Building

Office Building Office Area

Warehouse

Control Room

Speed Dome

IEEE 802.3af

PoE IP Camera

PoE Extender

IEEE 802.3af PoE

VoIP Phone

IEEE 802.3af

PoE IP Camera

IEEE 802.3at

PoE Splitter

FSD-504HP

PoE

DC Power Line (DC)

100Base-TX UTP

PoE

100Base-TX UTP with PoE

- 9 -

- 10 - - 12 - - 13 -

- 11 -

Note

Cable distance for Switch

The cable distance between the FSD-504HP

and PC / PD devices should not exceed 100

meters for UTP/STP cable.

Note

Make sure the wiring is correct

It can be used Category 3/4/5 cable in 10

Mbps operation. To reliably operate your

network at 100Mbps, you must use an Un-

shielded Twisted-Pair (UTP) Category 5/5e

cable, or better data grade cabling. While a

Category 3 or 4 cable may initially seem to

work, it will soon cause data loss.

Step 6: Supply power to the Fast Ethernet High Power

PoE Switch.

A. Connect one end of the power cable to the Switch.

B. Connect the power plug of the power cable to a

standard wall outlet.

When the Switch receives power, the Power LED should

remain solid Green.

Power Requirements DC 48V, 1.5A.

Power Consumption Max.62 watts / 211.5 BTU

Dimensions

(W x D x H) 90 x 80 x 21mm

Weight 172g

Power over Ethernet

PoE Standard

IEEE 802.3af Power over Ethernet

/ PSE

IEEE 802.3at Power over Ethernet

Plus / PSE

PoE Power Supply

Type Mid-Span

Power Pin Assignment 4/5(+), 7/8(-)

PoE Power Output

Per Port 48V DC, 375mA. Max.

15.4 watts (IEEE 802.3af)

Per Port 48V DC, 375mA. Max. 30

watts (IEEE 802.3at)

PoE Power Budget 60 watts

Number of 802.3af PD

Class 0, 1, 2, 3 can

be powered

Number of 802.3at PD

Class 1, 2, 3 can be

powered

7. Product Specications

Model

FSD-504HP

4-Port 10/100Mbps 802.3af / at

PoE + 1-Port 10/100Mbps Desktop

Switch

Hardware Specications

Network Connector 5-Port RJ-45 for 10/100Base-TX,

auto MDI / MDIX

PoE Inject Port 4-Port with 802.3af / at PoE

injector function (Port 2 to port )5

LED Display

System: Power (Green)

Per PoE port: PoE (Orange, port

2 to port )5

LNK/ACT (Green, port 1 to port 5)

Switch Architecture Store and Forward switch

architecture

MAC Address Table 1K MAC address table with Auto

learning function

Switch Fabric 1Gbps

Switch Throughput 0.74Mpps @64Bytes

Maximum Packet Size 1536Bytes

Flow Control

Back pressure for Half-Duplex.

IEEE 802.3x Pause Frame for Full-

Duplex

Number of 802.3at

PD Class 0, 4 can be

powered

Standard Conformance

EMI Safety FCC Class A, CE

Standard Compliance

IEEE 802.3

IEEE 802.3u

IEEE 802.3x

IEEE 802.3af

IEEE 802.3at

Ethernet

Fast Ethernet

Flow Control

Power over

Ethernet

High Power over

Ethernet

Environment

Operating

Environment 0 ~ 50 degrees C

Storage Environment -10 ~ 70 degrees C

Operating Humidity 5 ~ 95%, relative humidity, non-

condensing

Storage Humidity 5 ~ 95%, relative humidity, non-

condensing

8. Customer Support

Thank you for purchasing PLANET products. You can

browse our online FAQ resource on PLANET Website

rst to check if it could solve your issue. If you need

more support information, please contact PLANET switch

support team.

PLANET online FAQ:

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address:

support_switch@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All

other trademarks belong to their respective owners.

EC Declaration of Conformity

For the following equipment:

*Type of Product: 4-Port 10/100Mbps 802.3af/at PoE + 1-Port 10/100Mbps Desktop Switch

*Model Number: FSD-504HP

* Produced by:

Manufacturer‘s Name : Planet Technology Corp.

Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.)

is herewith confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

Directive on (2004/108/EC).

For the evaluation regarding the EMC, the following standards were applied:

EN55022 (2010 + AC:2011)

EN 61000-3-2 (2006 + A1:2009 + A2:2009)

EN 61000-3-3 (2008)

EN55024 (2010)

IEC 61000-4-2 (2008)

IEC 61000-4-3 (2010)

IEC 61000-4-4 (2012)

IEC 61000-4-5 (2005)

IEC 61000-4-6 (2008)

IEC 61000-4-8 (2009)

IEC 61000-4-11 (2004)

EN60950-1 (2006 + A11:2009 + A1:2010 +

A12:2011)

Responsible for marking this declaration if the:

Manufacturer  Authorized representative established within the EU

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

Person responsible for making this declaration

Name, Surname Kent Kang

Position / Title : Product Manager

Taiwan 15th Nov., 2013

Place Date Legal Signature

PLANET TECHNOLOGY CORPORATION

e-mail: sales@planet.com.tw http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Product specificaties

Merk:	Planet
Categorie:	Schakelaar
Model:	FSD-504HP
Kleur van het product:	Zwart
Gewicht:	257 g
Breedte:	100 mm
Diepte:	100 mm
Hoogte:	26 mm
LED-indicatoren:	Ja
Stroom:	1.25 A
Vermogensverbruik (max):	98 W
DC voltage input:	51 V
Certificering:	FCC，CE
Netwerkstandaard:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Temperatuur bij opslag:	-10 - 70 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Rack-montage:	Nee
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Ja
Switchingcapaciteit:	1 Gbit/s
MAC-adrestabel:	1000 entries
10G support:	Nee
Datastroombeheer:	Ja
Switch type:	Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten:	5
Fast Ethernet (koperen) ports kwantiteit:	5
Netstekker:	DC-in ingang
Type basis-switching RJ-45 Ethernet-poorten:	Fast Ethernet (10/100)
Throughput:	0.74 Mpps
Full duplex:	Ja
Koperen ethernetbekabelingstechnologie:	1000BASE-T, 100BASE-TX, 10BASE-T
Warmtedissipatie:	334 BTU/h
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	85176990
Hoeveelheid Power over Ethernet (PoE) ports:	4
Store-and-forward:	Ja