Pioneer VSX-1022 Handleiding

Pioneer Receiver VSX-1022

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer VSX-1022 (65 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/65

http://www.pioneerelectronics.com (US)

http://www.pioneerelectronics.ca (Canada)

•

Protect your new investment

The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft.

•

Improve product development

Your input helps us continue to design products that meet your needs.

•

Receive a free Pioneer newsletter

Registered customers can opt in to receive a monthly newsletter.

•

Receive free tips, updates and service bulletins on your new product

AV Receiver

VSX-1022-K

VSX-822-K

Operating Instructions

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_A1_En

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

Information to User

Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate

the equipment.

D8-10-2_A1_En

WARNING

This equipment is not waterproof. To prevent a fire or

shock hazard, do not place any container filled with

liquid near this equipment (such as a vase or flower

pot) or expose it to dripping, splashing, rain or

moisture.

D3-4-2-1-3_A1_En

WARNING

Before plugging in for the first time, read the following

section carefully.

The voltage of the available power supply differs

according to country or region. Be sure that the

power supply voltage of the area where this unit

will be used meets the required voltage (e.g., 230 V

or 120 V) written on the rear panel.

D3-4-2-1-4*_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat radiation

(at least 40 cm at top, 20 cm at rear, and 20 cm at each

side).

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the product,

and to protect it from overheating. To prevent fire

hazard, the openings should never be blocked or

covered with items (such as newspapers, table-cloths,

curtains) or by operating the equipment on thick carpet

or a bed.

D3-4-2-1-7b*_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame

sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Environment

Operating environment temperature and humidity:

+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light) D3-4-2-1-7c*_A1_En

Caution

To prevent fire hazard, the Class 2 Wiring Cable

should be used for connection with speaker, and

should be routed away from hazards to avoid damage

to the insulation of the cable.

D3-7-13-67*_A1_En

This Class B digital apparatus complies with

Canadian ICES-003. D8-10-1-3_A1_En

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

10)

Only use attachments/accessories specified by

the manufacturer.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

Unplug this apparatus during lightning storms

or when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

D3-7-13-69_En

11)

12)

13)

14)

If the AC plug of this unit does not match the AC

outlet you want to use, the plug must be removed

and appropriate one fitted. Replacement and

mounting of an AC plug on the power supply cord of

this unit should be only by qualified performed

service personnel. If connected to an AC outlet, the

cut-off Mplug can cause severe electrical shock. ake

sure it is properly disposed of after removal.

The equipment should be disconnected by removing

the mains plug from the wall socket when left unused

for a long period of time (for example, when on

vacation).

D3-4-2-2-1a_A1_En

CAUTION

The STANDBY/ON switch on this unit will not

completely shut off all power from the AC outlet.

Since the power cord serves as the main disconnect

device for the unit, you will need to unplug it from the

AC outlet to shut down all power. Therefore, make

sure the unit has been installed so that the power

cord can be easily unplugged from the AC outlet in

case of an accident. avoid fire hazard, the power To

cord should also be unplugged from the AC outlet

when left unused for a long period of time (for

example, when on vacation).

D3-4-2-2-2a*_A1_En

CAUTION

This product satisfies FCC regulations when shielded

cables and connectors are used to connect the unit

to other equipment. prevent electromagnetic To

interference with electric appliances such as radios

and televisions, use shielded cables and connectors

for connections. D8-10-3a_A1_En

IMPORTANT NOTICE

THE MODEL NUMBER AND SERIAL NUMBER OF

THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.

RECORD THESE NUMBERS ON YOUR ENCLOSED

WARRANTY CARD AND KEEP IN A SAFE PLACE

FOR FUTURE REFERENCE.

D36-AP9-1_A1_En

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product may expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

D36-P5_B1_En

This product is for general household purposes. Any

failure due to use for other than household purposes

(such as long-term use for business purposes in a

restaurant or use in a car or ship) and which requires

repair will be charged for even during the warranty

period. K041_A1_En

These symbols are only valid

in the European Union.

K058c_A1_En

(Symbol examples for batteries)

Product specificaties

Merk:	Pioneer
Categorie:	Receiver
Model:	VSX-1022
Kleur van het product:	Zwart
Gewicht:	9371 g
Breedte:	435.1 mm
Diepte:	342.39 mm
Hoogte:	167.64 mm
Bluetooth:	Nee
Ondersteund audioformaat:	AAC, FLAC, MP3, WAV, WMA
Type aansluitplug:	3,5 mm
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Composiet video-ingang:	2
Componentingang video (YPbPr/YCbCr):	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Volumeregeling:	Draaiknop
Hoofdtelefoonuitgangen:	1
3D:	Ja
Remote (IR) ingang:	1
Ingebouwde audio decoders:	Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
Digital Living Network Alliance (DLNA) gecertifieerd:	Ja
On Screen Display (OSD):	Ja
Audio Return Channel (ARC):	Ja
Audio-uitgangskanalen:	7.1 kanalen
AV-ingang:	Ja
Remote (IR) uitgang:	1
D/A-converter:	24-bit/192kHz
HDMI in:	6
Ondersteunde frequentiebanden:	AM, FM
Internet radio services ondersteund:	Pandora, vTuner
Apple docking:	Ja
Apple docking-compatibiliteit:	Ja
Digitale audio optische in:	2
Aantal HDMI-uitgangen:	1
Versterker:	Ja
X.V. kleur support:	Ja
Afstandsbediening inbegrepen:	Ja
Digitale audio-ingang (coax):	2
Wifi:	Nee
Slaaptimer:	Ja
AirPlay:	Ja
Vermogen uitvoer per kanaal (20-20KHz@8 Ohm):	80 W
Vermogen uitvoer per kanaal (1KHz@8 Ohm):	110 W
Inclusief optische drive:	Nee
Vermogen uitvoer per kanaal (1KHz@6 Ohm):	140 W
Graphical user interface (GUI):	Ja
Bi-amping:	Ja
Audio Lip synchronisatie:	Ja