Pioneer PRS-D2000SPL Handleiding

Pioneer Multimedia PRS-D2000SPL

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer PRS-D2000SPL (128 pagina's) in de categorie Multimedia. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/128

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO

NEDERLANDS

êìëëäàâ

CLASS D MONO AMPLIFIER

AMPLIFICATEUR MONO DE CLASSE D

Owner’s Manual

PRS-D2000SPL

Mode d’emploi

1
Before Using This Product  ...................... 1
Product registration  .......................................... 1
In case of trouble  .............................................. 2
About This Product  .......................................... 2
CAUTION ........................................................ 2
WARNING ........................................................ 2
Setting the Unit  .......................................... 3
MODE SELECT Switch   .................................. 3
Bass Boost Frequency Control .......................... 3
Bass Boost Level Control .................................. 3
Terminal Cover  ................................................ 3
Cut Off Frequency Control for LPF .................. 3
Gain Control ...................................................... 4
BFC (Beat Frequency Control) Switch  ............ 4
HEAT Indicator  ................................................ 4
PROTECT Indicator .......................................... 4
Power Indicator  ................................................ 4
Subsonic Select Switch  .................................... 4
Setting the Gain properly  .................................. 5
Connecting the Unit  .................................. 6
Connection Diagram  ........................................ 7
Solderless Terminal Connections ...................... 8
Connecting the Speaker Output Terminals  ...... 8
Connecting the Power Terminal ........................ 9
Setting the Gain for synced amplifier  ............ 10
Connecting the Speaker Wires  ........................ 10
Installation ................................................ 15
Attaching the Bass boost remote control  ........ 15
Example of installation on the floor mat 
or on the chassis  ...................................... 16
Replacing the terminal cover  .......................... 16
Changing the Direction of the Badge .............. 16
Additional information ............................ 17
Troubleshooting .............................................. 17
Specifications .......................................... 18
Thank you for purchasing this PIONEER
product. Before attempting operation, be
sure to read this manual.
Private households in the 25 member
states of the EU, in Switzerland and
Norway may return their used electronic
products free of charge to designated col-
lection facilities or to a retailer (if you pur-
chase a similar new one).
For countries not mentioned above, please
contact your local authorities for the cor-
rect method of disposal.
By doing so you will ensure that your dis-
posed product undergoes the necessary
treatment, recovery and recycling and thus
prevent potential negative effects on the
environment and human health.
Product registration
Visit us at the following site:
Register your product. We will keep the
details of your purchase on file to help you
refer to this information in the event of an
insurance claim such as loss or theft.
If you want to dispose this
product, do not mix it with
general household waste. There
is a separate collection system
for used electronic products in
accordance with legislation that
requires proper treatment,
recovery and recycling.
Contents Before Using This Product

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO

NEDERLANDS

êìëëäàâ

In case of trouble

When the unit does not operate properly,

contact your dealer or the nearest autho-

rized PIONEER Service Station.

About This Product

This product is a class D amplifier for the

subwoofer. If both L (left) and R (right)

channels are connected to the RCA input

of this product, output is mixed because

this product is a mono amplifier.

CAUTION

•Never replace the fuse with one of greater value

or rating than the original fuse. Use of an

improper fuse could result in overheating and

smoke and could cause damage to the product

and injury including burns.

•Use the supplied hexagonal wrench to tighten

screws when fastening wires to the terminal or

when changing the direction of the badge. The

use of a long, commercially available hexagonal

wrench can cause excessive torque to be applied

possibly resulting in damage to terminals and

wires.

WARNING

•Always use the recommended battery wire and

ground wire, which is sold separately. Connect

the battery wire directly to the car battery positive

terminal (+) and the ground wire to the car body.

•Do not touch the amplifier with wet hands.

Otherwise you may get an electric shock. Also,

do not touch the amplifier when it is wet.

•For traffic safety and to maintain safe driving

conditions, keep the volume low enough so that

you can still hear normal traffic sound.

•Check the connections of the power supply and

speakers if the fuse of the separately sold battery

wire or the amplifier fuse blows. Detect the cause

and solve the problem, then replace the fuse with

another one of the same size and rating.

•To prevent malfunction of the amplifier and

subwoofer, the protective circuit will cut the

power supply to the amplifier (sound will stop)

when an abnormal condition occurs. In such a

case, switch the power to the system OFF and

check the connection of the power supply and

subwoofer. Detect the cause and solve the

problem.

•Contact the dealer if you cannot detect the cause.

•To prevent an electric shock or short-circuit

during connection and installation, be sure to

disconnect the negative (–) terminal of the battery

beforehand.

•Confirm that no parts are behind the panel when

drilling a hole for installation of the amplifier. Be

sure to protect all cables and important equipment

such as fuel lines, brake lines and the electrical

wiring from damage.

•DO NOT allow amplifier to come into contact

with liquids due to, for example, the location

where the amplifier is installed. Electrical shock

could result. Also, amplifier and speaker damage,

smoke, and overheating could result from contact

with liquids. In addition, the amplifier surface

and the surface of any attached speakers could

become hot to the touch and minor burns could

result.

Product specificaties

Merk:	Pioneer
Categorie:	Multimedia
Model:	PRS-D2000SPL
Gewicht:	9100 g
Connectiviteitstechnologie:	Bedraad
Uitgangsvermogen:	2000
Impedantie:	4 Ohm
Frequentiebereik:	10 - 240 Hz
Lijnuitgang:	Ja
Lijningang:	Ja
Signaal/ruis-verhouding:	85 dB
Aantal kanalen:	1 kanalen
Afmetingen (B x D x H):	586 x 282 x 65 mm
Maximum input level:	6.5 V
Afgegeven vermogen (DIN):	2000