Pioneer CA-HR-FOR-EVO.002 Handleiding

Pioneer Niet gecategoriseerd CA-HR-FOR-EVO.002

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer CA-HR-FOR-EVO.002 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Installation manual SPH-EVO93DAB-FOR | Version 2.0
EN - Installation Manual
Original dashboard
Interface
Remove radio surround trim
Remove original radio
1 2
4
3
CA-HR-FOR-EVO.002
INSTALLATION KIT FOR SPH-EVO93DAB-FOR
Remove 4 screws from the support bracket
Compatibility:
• Ford Transit Custom-V362MCA (2018 - ...
• Ford Transit 2T-V363MCA (2019 - ...)
ATTENTION:
Compatible OEM radio: T15114A
Not compatible with OEM touch screen units
Outside temperature will no longer be visualised.
Screen brackets Dashboard cover
Screen coverScrew covers
Screen neck
Cable cover
Installation manual SPH-EVO93DAB-FOR | Version 2.0
Screw screenbracket onto the screen
using the 2 middle screws
Slide the screen support
onto the the radio unit
Take out the support bracket
Install the side brackets to the radio unit,
both left and right
Secure it with the 4 hexagonal screws
Secure the screen cover
with the remaining 4 screws
5
8
10
7
6
9
Mount screw covers, paying attention
to the marked numbers and locations
1 2
4
3
Installation manual SPH-EVO93DAB-FOR | Version 2.0
Install the radio front cover
into the dashboard
Attach the display cable to the screen
and slide the bracket into the dashboard
After all connections are made install the radio unit in the dash-
board with 6 screws & route the display cable to the front
Slide the display neck into the trim
12
16
15
17
Remove inside trim from fascia
Put the radio surround trim
back into the dasboard
14
13
1To steering wheel control to
SPH unit backside
2 To optional remote for
external power source
3 To backside EVO unit
4 To van’s main connector
5 To original USB plug in
dashboard
6 To USB-input on EVO unit
(also use conversion wire
from USB-C to USB-A -
included with SPH unit)
7 To original aerial connector
8 To EVO unit FM-input
9 Close loop on vehicle with
automatic gearbox
1
2
3
4
5
6
78
9
11
Make required connections


Product specificaties

Merk: Pioneer
Categorie: Niet gecategoriseerd
Model: CA-HR-FOR-EVO.002

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer CA-HR-FOR-EVO.002 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Pioneer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd