Pioneer CA-HM-GM.003 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer CA-HM-GM.003 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
INSTALLATION INSTRUCTIONS FOR PART 99-3309B
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 5/15/2013 INST99-3309B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
A) Radio Trim PanelB) Radio BracketsC) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (10) White Plastic Panel Clips
• F) Interface G) 16-pin harness • H) 4-pin to 4-pin resistor pad • I) 22-pin to 44-pin harness
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:Interface included Antenna Adapter:40-EU55 antenna adapter
• Panel removal toolPhillips screwdriver
• Small flat-blade screwdriver
TOOLS REQUIRED
A B C
F G H I
D E
ISO DIN head unit provision with pocket
DDIN head unit provisions
Interface included retains factory OnStar, Bluetooth,
and all warning chimes
Provides a 12-volt accessory power and VSS,
parking brake, and reverse signals
Painted Matte Black
Table of Contents
Dash Disassembly
Chevy Spark 2013-up .......................................... 2
Kit Assembly
ISO radio provision with pocket ............................ 3
DDIN radio provision ............................................ 4
Axxess Interface Installation
Installing Interface.............................................5-6
Vehicle Customization with Optional LCD .............. 7
99-3309B
1. Unclip and remove the radio trim
panel. (Figure A)
2. Remove (4) Phillips screws
securing the factory radio and
remove from dash. (Figure B)
3. Unclip and remove the vents from
the factory panel. (Figure C)
4. Unclip and remove the hazard
button from the trim panel.
(Figure C)
5. Remove (5) Phillips screws
securing the upper display shroud
from the factory panel. (Figure C)
Continue to kit assembly
Dash Disassembly
(Figure A)
(Figure C)
Step 3
Step 5
Step 4
Step 5
(Figure B)
99-3309B
Kit Assembly
ISO DIN radio provisions
1. Attach the factory vents and hazard
button to the Metra trim panel. (Figure A)
2. Attach the upper display shroud the
Metra trim panel with the factory screws.
(Figure A)
3. Attach the provided (10) panel clips to the
legs of the Metra trim panel.
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Attach the radio brackets to the
aftermarket radio using the screws
supplied with the radio, then secure the
assembly to the pocket using the (4)
#8 x 3/8” Phillips screws. (Figure B)
6. Mount the assembly into the sub-dash.
7. Reassemble dash in reverse order of
disassembly using the Metra trim panel
instead of the factory trim panel.
(Figure B)
(Figure A)
Step 2
Step 1
Step 1
Step 2


Product specificaties

Merk: Pioneer
Categorie: Niet gecategoriseerd
Model: CA-HM-GM.003

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer CA-HM-GM.003 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Pioneer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd