Phoenix SS0311E Handleiding

Phoenix Kluis SS0311E

Lees hieronder de 📖 handleiding in het Nederlandse voor Phoenix SS0311E (1 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

SS0310E INSTRUCTIONS &

GUARANTEE REGISTRATION

Phoenix Safe Company: Where peace  mind is guaranteed

POWER SUPPLY

Battery

• The working voltage for the product is equal to 4 x AA batteries (not supplied).

• System will turn into micro power consuming state automatically.

Test battery voltage

• Press the "#" key, if the display reads "BA-H", it means the batteries are normal;

if the display reads "BA-L", it means the voltage are low and must be replaced

as soon as possible.

CAUTION: When replacing batteries, do replace all the batteries at once and never use

old and fresh batteries together. Never mix the specified batteries with other types of

batteries in use.

SETTING THE PERSONAL CODE

• Enter the factory default code 1 2 3 4 the LCD display will Indicate "open".

• With door opened, enter four-digit code (the code digits can be three, five, or six

digits, depending on programming control).

• Press"#", screen displays "CLOSED", which means the door is closed.

• The screen will show the code entered. Your new code has been accepted and

you can open the door with your new code displayed.

SETTING THE MASTER CODE

• Press “**” when the door is open, the display reads "PROG".

• After “PROG” disappears, enter preset master code (The original master code of

hotel mode is "011223") and reading “NEW”.

• After “NEW” disappears, input your new code (6 digits) within 5 seconds, the

display will read “AGAIN”.

• After “AGAIN” disappears, input your new code (6 digits) again within 5 seconds,

then the display reads “DONE”, which means the new master code setting is

successful, if not, the display will read "ERROR".

SECURITY FUNCTION

HIDE THE CODE

• Press “*” before entering code. The display will not display your number and will

not display the code you enter when the door is closed.

AUTOMATICAL LOCK

• After four consecutive times of error codes, the system will be locked out

automatically. During that time, the display will display "HOLD15" 15 minutes

later, the system will start again, allowing button entry. (You can set up for 0 to

60 minutes through the programming controlling position.)

OPENING THE SAFE IN EMERGENCY

If the electronics malfunction or battery is low, or codes unknown.

Use the emergency key to open the door

• Unscrew the plate with supplied Allen key

• Insert the emergency key and turn clockwise

ERROR INDICATION

When screen displays the following indications, it means there are errors. Please

operate according to the following instructions.

• ERROR - means the code is incorrect, and you need to enter correct code.

• ERROR1- means the door cannot be opened normally, and the bolt is blocked.

Please push the door slightly to loosen the bolt

• ERROR2 - when the bolt is blocked there is no way to lock the door. Please push

the door slightly to finish locking.

INSTALLATION

• Drill holes for expansion bolts (or clamping screws) through base/wall fixing

holes.

• Turn the expansion bolts counter clockwise to separate.

• Use the expansion bolts (or clamping screws) to secure the safe to the wall/floor.

• Make sure the safe is in the correct position and then tighten all screws.

CAUTION: Use the expansion bolt when there is a concrete wall surface.

Use the clamping screw when there is a wooden wall surface.

Please do not keep emergency keys in your safe!

1 ABC 2 DEF 3 GHI

4 JKL 5 MNO 6 PQR

7 STU 8 VWX 9 YZ

*0#

SS0310E OPERATING INSTRUCTIONS

& GUARANTEE REGISTRATION

Please submit your guarantee registration by visiting our website

www.phoenixsafe.com and clicking on guarantee registration.

For further assistance or information please contact us on 0151 944 6444.

APEX HOUSE, 1 ORRELL MOUNT, LIVERPOOL, L20 6NS,

UNITED KINGDOM | +44 (0)151 944 6444

Product specificaties

Merk:	Phoenix
Categorie:	Kluis
Model:	SS0311E
Kleur van het product:	Graphite, Metallic
Ingebouwd display:	Ja
Gewicht:	13000 g
Breedte:	520 mm
Diepte:	406 mm
Hoogte:	200 mm
Montagewijze:	Vloer/muur
Afmetingen binnenkant (B x D x H):	517 x 346 x 197 mm
Inhoud:	35 l
Slot type:	Elektronisch