Phoenix Gold ZDA4.6 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Phoenix Gold ZDA4.6 (28 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Model: Z110-V2, Z112-V2
4-Channel DSP Amplier
Model: ZDA4.6
• DSP + Amplier
• 800W Max Power, 400W RMS
• 4x60W @ 4Ohm, 4x100W @ 2Ohm
with DSP control
• PC Control software
(and APP control ready iOS and Android)
• BT streaming sold separately
(inludes APP Control)
KEY FEATURES
ZDA4.6 Owners Manual
© 2021 Phoenix Gold • www.phoenixgold-eu.com
ZDA4.6 - DSP AMPLIFIER
INSTALLATION
WHEN USING AN RCA INPUT:
u First, connect the positive wire (12v) to the vehicle battery (20A fuse is required)
u Next, connect the negative wire to the vehicle chassis to create a GND connection.
u Put the REM from main engine to “FL+” on the ZDA4.6 HI INPUT
u Finally, ensure all other connections are made, plug in PCA out, and ensure the unit
is xed securely in a location free of dirt and dust with enough ventilation for optimum
operation.
WHEN USING A HI INPUT:
u First, connect the positive wire (12v) to the vehicle battery (20A fuse is required)
u Next, connect the negative wire to the vehicle chassis in order to create
a ground connection.
u Finally, ensure all other connections are made, plug in PCA out, and ensure the unit
is xed securely in a location free of dirt and dust with enough ventilation for optimum
operation.
© 2021 Phoenix Gold • www.phoenixgold-eu.com
ZDA4.6 Owners Manual
ZDA4.6 - DSP AMPLIFIER
u First, ensure the mounting location is free of dirt and dust and that there is
enough ventilation in order to achieve optimum performance and avoid
overheating when the ZDA4.6 is in use.
u Keep the wire connections as short as possible but with sufcient length in
order to minimise any power losses and provide a higher audio output of
the system.
u Where possible route all power and speaker wiring through any existing
wire channels within the vehicle in order to ensure wiring does not pass
through sharp edged metal.
1
2
The Power Connection Mode shown (1) only applies to a power outlet less
than 40Watts; in other cases, please use power connection mode (2)
INSTALLATION - CONTINUED


Product specificaties

Merk: Phoenix Gold
Categorie: Receiver
Model: ZDA4.6

Heb je hulp nodig?

Als je hulp nodig hebt met Phoenix Gold ZDA4.6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Phoenix Gold

Handleiding Receiver

Nieuwste handleidingen voor Receiver