Philips SWS2326W Handleiding

Philips Niet gecategoriseerd SWS2326W

Lees hieronder de 📖 handleiding in het Nederlandse voor Philips SWS2326W (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 211 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

N2 I

N3IN4

ELECT

MODE

AUTO

ANUAL

A U DIO

Y G

VID EO

Pb B PrR

IN PUT4

VID EO

SWS2326W/17

EN User manual 3

SP Manual de utilizador 5

Manuel d'utilisateur 8

5*6:6:PDQXDOSGI

5*6:6:PDQXDOSGI5*6:6:PDQXDOSGI

5*6:6:PDQXDOSGI





Introduction

Congratulations on your purchase of PHILIPS Multi-video input

A/V switcher. Your A/V switcher is designed to accept up to 4

signals from any AV equipment and deliver them to a TV or a

Home Theater System. The switcher accepts video input signals

from component, s-video or composite video sources and audio

input signals from a stereo audio source to provide a single

audio/video output to your TV. NOTE:The switcher can con-

vert an s-video signal to composite video, and vice versa. But it

can not convert component video signals.The switcher is

designed to operate either in Manual mode or Automatic mode.

Parts Required

You will need the following items, not supplied with your AV

switcher.

Stereo audio cable

Component video cable OR

S-Video cable OR

Composite Video cables

Connection

Follow these steps to connect your AV Switcher.

• Connect one end of a video cable plug (S-Video, composite

video or component video) to the output jack(s) of your

video source then connect the other end of a video cable

plug to any one of the input jacks on your AV switcher.

• Connect the stereo audio cable plugs between the audio out-

put jacks of an audio source and the audio input jacks (red &

white) on your AV switcher.

• Connect a video and an audio cable between the video and

audio output jacks of the AV switcher and the video and

audio input jacks of your TV.

• Connect DC power plug on the back of the unit and plug the

2-pin AC/DC power adapter to an 120VAC outlet.

Note: You must use matching cables for input and output con-

nections in order for the unit to work properly. (for example, if

you use a component video cable as an input, you must use a

component video cable for output.)

Introduction

5*6:6:PDQXDOSGI

5*6:6:PDQXDOSGI5*6:6:PDQXDOSGI

5*6:6:PDQXDOSGI





MODE Button

The MODE button toggles between the automatic mode and the

manual mode. In the automatic mode, the red LED is normally

ON. In the manual mode, the red LED is OFF. By default, the

AV switcher will be in the automatic mode. To change from an

automatic mode to manual mode, simply press the MODE but-

ton once, the red LED will turn OFF.

SELECT Button

The SELECT button is available only when the AV switcher is in

the manual mode. By default, the AV switcher selects input-1

when switching from automatic mode to manual mode.To select

a desired input simply press the SELECT button and the AV

switcher changes inputs from Input-1 to Input- 2 and IN2 LED

will be lit. Press the SELECT button again, Input-3 will be select-

ed and IN3 LED will be lit. Pressing the SELECT button again

will select next input which is Input-4 and IN4 LED will be lit.

The input selection is cyclic.

Automatic Mode Operation

When the MODE LED is ON, the unit is in automatic mode.

The unit automatically searches for all video inputs to find the

last active video signal. The unit is designed to select the last

active video input automatically. For Example:

If a user selected video inputs in this sequence IN1

→

→→

IN2 →

→

→→

IN3 →

→

→→

IN4, at this time, the video output will be from IN4

(front Input). If there is no video signal for IN4 input, the unit

automatically switches to next previous input source. (in this

case, it will be IN3).

If the user selects video input in this sequence: IN1

→

→→

IN3 →

→

→→

IN4 →

→

→→

IN2, at this time, the video output will be IN2. If there is

no video signal for IN2 input, the unit will switch to next previ-

ous video input source (in this case, it will be IN4).

Note: When the switcher is in automatic mode and the user

decides to change to Manual mode, the output of this unit will

be routed to the last active input.

Manual Mode Operation

When the user presses the MODE button, the unit enters into

manual mode. The mode indicating LED will g o off, the LED IN1

will be lit. The output of this box will be routed to IN1. If the

user presses the SELECT button, the LED IN2 will be lit and

LED IN1 will go off. The output of this box will now be routed

Operation

5*6:6:PDQXDOSGI

5*6:6:PDQXDOSGI5*6:6:PDQXDOSGI

5*6:6:PDQXDOSGI





Product specificaties

Merk:	Philips
Categorie:	Niet gecategoriseerd
Model:	SWS2326W

Heb je hulp nodig?

Als je hulp nodig hebt met Philips SWS2326W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Philips

Philips LatteGo CA6708 Handleiding

12 November 2024

Philips Avent SCF763 Handleiding

12 November 2024

Philips TAFBL1 Handleiding

25 September 2024

Philips Pronto Neo TSU500 Handleiding

9 September 2024

Philips DS9800WS Handleiding

29 Augustus 2024

Philips ADD8801 Handleiding

27 Augustus 2024

Philips GC139 Handleiding

18 Mei 2024

Philips HL1600/00 Handleiding

17 Mei 2024

Philips DCP746 Handleiding

7 Mei 2024

Philips HR3573 Handleiding

7 Mei 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo VPPI Handleiding

21 November 2024

Festo VAVE-P17-TP-5YL1-P Handleiding

21 November 2024

Festo SD-SUB-D-BU9 Handleiding

21 November 2024

Festo SAMH-F12-MK Handleiding

21 November 2024

Festo SFAB Handleiding

21 November 2024

Festo SASC-P4-A-M8-S Handleiding

21 November 2024

Festo SFAH Handleiding

21 November 2024

Festo DRRD-12 Handleiding

21 November 2024

Festo SDE3 Handleiding

21 November 2024

Festo SFTE Handleiding

21 November 2024