Philips SCF922 Handleiding

Philips Niet gecategoriseerd SCF922

Lees hieronder de 📖 handleiding in het Nederlandse voor Philips SCF922 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 252 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

1 Introduction

Congratulations on your purchase and welcome to Philips AVENT! To fully

beneﬁt from the support that Philips AVENT offers, register your product at

www.philips.com/welcome.

2 Important

Read this user manual carefully before you use the appliance and save it for

future reference.

Danger

• Never immerse the base, the mains cord or the mains

plug in water or any other liquid.

• Failure to follow the descaling instructions may cause

irreparable damage.

• Never disassemble the base to avoid the risk of

electric shock.

Warning

• This appliance shall not be used by children. Keep the

appliance and its cord out of reach of children.

• This appliance can be used by persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the hazards

involved.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by

children without supervision.

• Check if the voltage indicated on the appliance

corresponds to the local mains voltage before you

connect the appliance.

• Only connect the appliance to an earthed wall socket,

and make sure the plug is ﬁrmly inserted in the wall

socket. Keep the mains cord away from hot surfaces.

• Do not use the appliance if the plug, the mains cord or

the appliance itself is damaged.

• If the mains cord is damaged, it must be replaced by

Philips AVENT, a service centre authorised by Philips

AVENT or similarly qualiﬁed persons in order to avoid a

hazard.

• There are no serviceable parts inside the electric

steam steriliser. Do not attempt to open, service or

repair the electric steam steriliser by yourself.

• The appliance becomes very hot during sterilisation

and may cause burns if it is touched.

• Beware of hot steam that comes out of the vent in

the lid or when you remove the lid. Steam can cause

burns.

• Do not touch the base, the baskets, the lid and

sterilised items during or shortly after sterilisation to

avoid getting burnt. Only lift the lid by its grip.

• Never move or open the appliance when it is in use

or before it has cooled down.

SCF922

User manual

424121046893

020 7949 0240

(local rate, mobile rates may vary)

Overview Beforeﬁrstuse

Using the steriliser Tips

Cleaning

www.philips.com/welcome

Always there to help you

Specifications are subject to change without notice

65 6882 3999

1800 880 180

015 24 54 43

(local rate, mobile rates may vary)

IRL

• Never place items on top of the appliance when it is in use.

• Only use water without any additives for sterilisation.

Recommend to use puriﬁed water to decrease

limescale.

• Only use white vinegar according to the user manual

when descaling. Do not put bleach or other chemicals

in the appliance.

• Only sterilise baby bottles and other items that are

suitable for steam sterilisers. Check the user manual of

the items you want to sterilise, to make sure they are

suitable for steam sterilisers.

• To stop the sterilisation under urgent circumstances,

press the power-off button, and unplug the appliance.

Sterilising for a shorter period of time may affect the

sterilisation efﬁcacy.

• The heating plate surface is subject to residual heat

after use. Be careful not to get burnt by it.

• This appliance is intended for household use only.

• Do not use abrasive or aggressive cleaning agents (e.g.

bleach) or a scouring pad to clean this appliance.

• The steriliser is not dishwasher-proof.

Caution

• Never use any accessories or parts from other

manufacturers or that Philips AVENT does not

speciﬁcally recommend. If you use such accessories or

parts, your guarantee becomes invalid.

• The appliance is intended to be used indoors. Do not

expose it to extreme heat or direct sunlight.

• Always unplug the appliance and let it cool down

before moving or storing it.

• Do not sterilise very small items which can fall through

the holes to the heating plate.

• Never place items directly on the heating plate when

the appliance is switched on.

• Do not use the appliance if it has fallen or is damaged

in any way. Take it to an authorised Philips AVENT

service centre for repair.

• Always place and use the appliance on a dry, stable,

level and horizontal surface.

• Do not place the appliance on a hot surface.

• Do not let the mains cord hang over the edge of the

table or worktop on which the appliance stands.

• Pour any remaining water out of the appliance after

use and when the appliance has cooled down.

• Always unplug the appliance after use.

• Environmental conditions, such as altitude above 2500

meters, may affect the sterilising performance of this

appliance.

Electromagneticﬁelds(EMF)

This Philips appliance complies with all applicable standards and regulations

regarding exposure to electromagnetic ﬁelds.

3 Overview(Fig.1)

aLid fPower-on indicator

bSmall basket g Power-on button “I”

cBig basket h Power-off button “O”

dHeating plate iMains cord

eBase

4 Beforefirstuse(Fig.2)

When you use the appliance for the ﬁrst time, we advise you to let it complete

one sterilisation process with empty baskets.

1 Use a baby bottle and pour 90ml/3 ﬂuid oz puriﬁed water or tap water

directly into the heating plate. (Fig. 2-1)

2 Place the big basket on the base. Adjust the position of the big basket so

that it ﬁts properly on the base. (Fig. 2-2)

3 Place the small basket in the big basket. Adjust the position of the small

basket so that it ﬁts properly in the big basket. (Fig. 2-3)

4 Place the lid on top of the small basket. Adjust the position of the lid so that

it ﬁts properly on the small basket. (Fig. 2-4)

5 Put the plug in the wall socket. (Fig. 2-5)

6 Press the power-on button to switch on the appliance. (Fig. 2-6)

» The power-on indicator lights up to indicate that the appliance starts operating.

» A sterilising cycle takes around 10 minutes (Fig. 2-7). When the

sterilisation process is ﬁnished, the power-on indicator goes out and the

appliance switches off automatically.

7 Unplug the appliance (Fig. 2-8). Wait until the appliance has cooled down

completely (Fig. 2-9), and then remove the lid, the small basket and the big

basket, and wipe them dry.

Note

• The appliance does not work for about 10 minutes after a sterilising cycle, it needs

to cool down ﬁrst.

5 Usingthesteriliser(Fig.3)

Note

• To make sure the steriliser stands stable, clip the mains cord into the cord slot in

the bottom of the base.

•Make sure all parts that need to be sterilised are completely disassembled and

place them in the basket with their openings pointing down to prevent them from

ﬁlling up with water.

• Only place items which are suitable for sterilising in the steriliser. Do not sterilise

items that are ﬁlled with liquid, e.g. a teether with cooling ﬂuid.

1 Thoroughly clean the items to be sterilised.

2 Use a baby bottle and pour 90ml/3 ﬂuid oz puriﬁed water or tap water

directly into the heating plate. (Fig. 3-1)

3 Place the big basket on the base. Adjust the position of the basket so that

it ﬁts properly on the base. Then put the bottles in the basket with their

openings pointing down. (Fig. 3-2)

4 Place the small basket in the big basket (Fig. 3-3). Adjust the position of the

small basket so that it ﬁts properly in the big basket, then put the accessories

in the small basket.

Tip

• When putting larger teats in the small basket, place the teat in the basket ﬁrst, then

place the dome cap on the teat, and place the screw ring on the dome cap. (Fig. 3-4)

5 Place the lid on top of the small basket. Adjust the position of the lid so that

it ﬁts properly on the small basket. (Fig. 3-5-1)

6 Put the plug in the wall socket. (Fig. 3-5-2)

7 Press the power-on button to switch on the appliance. (Fig. 3-6)

» The power-on indicator lights up to indicate that the appliance starts operating.

» A sterilising cycle takes around 10 minutes (Fig. 3-7). When the

sterilisation process is ﬁnished, the power-on indicator goes out and the

appliance switches off automatically.

8 Unplug the appliance (Fig. 3-8). Wait until the appliance has cooled down

completely (Fig. 3-9), and then remove the lid and the sterilised items from

the baskets.

Warning

• Be careful when removing the lid, hot steam may come out of the steriliser.

•The sterilised items might be hot. Be careful not to get burnt by them.

Note

• Make sure you wash your hands thoroughly before you touch the sterilised items.

Tip

• After the appliance has cooled down, you can hang the lid on the side of the big

basket (Fig. 4-1). You can also place the lid on a table with the handle facing down

(Fig. 4-2), this way you can put the small basket on the tilted lid to keep it hygienic,

and easily take out the sterilised items in the big basket.

• When removing the items from the big and small baskets, you can use a Philips

AVENT bottle tong (sold separately).

6 Cleaning(Fig.5)

Warning

• Do not use abrasive or aggressive cleaning agents (e.g. bleach) or a scouring pad to

clean this appliance.

• Never immerse the base, the mains cord or the mains plug in water or any other liquid.

•The steriliser is not dishwasher-proof.

1 Always unplug the appliance after use. (Fig. 5-1)

2 After the appliance has cooled down, pour out any remaining water from

the heating plate (Fig. 5-2), and then clean the surfaces around the base and

heating plate with a soft cloth (Fig. 5-3).

3 Clean the big basket, small basket and lid under the tap with some washing-

up liquid, and wipe them dry.

Note

• After cleaning, store the steriliser in a clean and dry place.

7 Descaling

When you use the steriliser, small spots may appear on the heating plate in

the base. This is limescale that is building up. The harder the water, the faster

limescale builds up. Descale the steriliser once each week to ensure that it

continues to work effectively. The frequency of descaling depends on how

much limescale is building up.

1 Pour 60ml/2 ﬂuid oz of water and 30ml/1 ﬂuid oz of white vinegar (6-8%

acetic acid) into the heating plate.

2 Leave the solution in the heating plate until the limescale has resolved. The

process takes about 20 minutes, but should not be longer than 1 hour.

3 Empty the heating plate, thoroughly rinse it and wipe with a soft cloth.

Note

• When descaling, do not put the plug in the wall socket.

• After descaling, store the steriliser in a clean and dry place.

8 Recycling

Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an ofﬁcial collection point for

recycling. By doing this, you help to preserve the environment.

9 Guarantee and service

Philips Consumer Lifestyle guarantees its products under correct usage for

a period of two years after the date of purchase. If any defect due to faulty

materials and workmanship occurs within this two-year guarantee period,

Philips Consumer Lifestyle will repair or replace the product at its expense.

For repair or replacement, make sure to provide convincing proof, for instance

by means of a receipt, that the day on which service is claimed is within the

guarantee period.

The guarantee only covers the base and its electrical components. It does not

cover non-electrical parts, accessories and consumable parts. The guarantee

does not cover shipping and handling fees, and on-site services fees either.

If you need service or information, or if you have a problem, please contact the

Philips AVENT Service Centre in your country.

Website: http://www.philips.com/support

10 Troubleshooting

This chapter lists the questions most frequently asked about the appliance.

If you cannot ﬁnd the answer to your question, contact the Consumer Care

Centre in your country.

Question Solution

Why does water

ﬂow out of the

steriliser?

• You may have poured too much water into the

steriliser. Do not pour more than 90ml water into

the heating plate.

• The steriliser may not be stably positioned. Make

sure the mains cord is well ﬁtted inside of the cord

slot in the bottom of the base.

Why are there white

spots on the heating

plate, the baskets or

the lid?

• Limescale build-up is normal and occurs more

quickly in hard water areas. Descale the appliance

regularly (see chapter ‘Descaling’).

Why does a lot of

steam escape from

under the lid?

• Check if the lid has been placed on the small

basket properly.

Why does the

sterilisation process

take so long?

• To sterilise the items thoroughly, the default

sterilising time is around 10 minutes (when 90ml

water is poured into the heating plate).

• You may have poured too much water into the

steriliser (see chapter ‘Using the steriliser’). The

amount of water in the steriliser and the number

of items placed in the baskets determine the actual

sterilising time.

Why is the

sterilisation process

so short?

• You may have poured too little water into the

steriliser (see chapter ‘Using the steriliser’).

Why does the

appliance start to

heat up, and the

power-on indicator

lights up immediately

when I plug it in?

• When you press the power-on button before you

put the plug in the wall socket, the steriliser starts

operating immediately when you plug it in. Do

not touch the heating plate as it starts heating up

immediately. You can press the power-off button to

stop the heating process.

Why can’t I restart

the appliance?

• After a sterilising cycle, the appliance does not

work before it has cooled down. Wait for around

10 minutes before you switch on the appliance

again.

Product specificaties

Merk:	Philips
Categorie:	Niet gecategoriseerd
Model:	SCF922
Kleur van het product:	Wit
Gewicht:	1.5 g
Breedte:	260 mm
Diepte:	180 mm
Hoogte:	308 mm
Land van herkomst:	China
Flessen-capaciteit:	5 fles(sen)
Materiaal:	Polypropyleen (PP)
Afmetingen (B x D x H):	260 x 308 x 180\t mm
AC-ingangsspanning:	220 V
Stroomverbruik (typisch):	600 W
Sterilisatietijd:	10 min