Perel TL62000 Handleiding

Perel Niet gecategoriseerd TL62000

Lees hieronder de 📖 handleiding in het Nederlandse voor Perel TL62000 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

TL62000

BIKE HANGER

FIETSLIFT

PORTE-VÉLO

SOPORTE ELEVADOR DE BICICLETAS

FAHRRAD-DECKENLIFT

SUPORTE PARA BICICLE TA

USER MANUAL 3

HANDLEIDING 5

MODE D'EMPLOI 7

MANUAL DEL USUARIO 9

BEDIENUNGSANLEITUNG 11

MANUAL DO UTILIZADOR 13

TL62000

V. 01 30/09/2016 2 ©Velleman nv –

TL62000

V. 01 30/09/2016 3 ©Velleman nv –

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could

harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should

be taken to a specialized company for recycling. This device should be returned to your distributor or to

a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Perel. Please read the manual thoroughly before bringing this device into service. If the

device was damaged in transit, do not install or use it and contact your dealer.

2. Safety Instructions

This device can be used by children aged from 8 years and above, and persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge if they have been given

supervision or instruction concerning the use of the device in a safe way and understand the hazards

involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by

children without supervision.

Do not use the device when damage to housing or cables is noticed. Do not attempt to service the

device yourself but contact an authorised dealer.

3. General Guidelines

Refer to the on the last pages of this manual. Velleman® Service and Quality Warranty

Protect this device from shocks and abuse. Avoid brute force when operating the device.

 Familiarise yourself with the functions of the device before actually using it.

 All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to

the device is not covered by the warranty.

 Only use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

 Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

 Keep this manual for future reference.

4. Mounting

For the best results, mount the lift assemblies so the hooks are directly above the seat and handlebar.

If you wish, you can mount the entire assembly to a board and then mount the board to ceiling joists.

1. Measure the distance between the handlebars and the back of the seat. This is where the hooks will attach

to the bike. These measurements will be transferred to the ceiling or a board.

2. Locate a ceiling joist. If your ceiling is covered with drywall, look for nail props, irregularities and fixtures.

These are clues to locating joists. Use a small nail or screwdriver to run a pilot hole into the ceiling to

ensure that you have located a joist. Once a joist is located, measure from wall to the joist. Transfer your

seat/handlebar measurement along the joist so the lift attachments line up. If you are planning to mount

the lift assemblies in the opposite direction of the joists, you will need to mount the lift assemblies to a

board and attach the board to two joists.

3. Tie a double knot on the rope end. Feed the rest of rope through square hole on lift assembly. Continue

threading the rope through the lift assembly pulleys and hook assembly pulleys.

4. Using the wood screws provided, mount each of the lift assemblies (3 screws each) to the ceiling ensuring

that the hooks line up with your seat/handlebar measurements.

5. Use the remaining 2 wood screws to mount the rope cleat to the wall. Again, you will need to find a stud to

mount the cleat. Use wall anchors if necessary. Do not cut the rope. Use cleat for excess.

Product specificaties

Merk:	Perel
Categorie:	Niet gecategoriseerd
Model:	TL62000

Heb je hulp nodig?

Als je hulp nodig hebt met Perel TL62000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Perel

Perel TC77301 Handleiding

14 December 2024

Perel BG57000V2 Handleiding

27 Maart 2024

Perel SOL/MK Handleiding

23 November 2023

Perel EFL91 Handleiding

23 November 2023

Perel WT007-1 Handleiding

16 Augustus 2023

Perel LEDA97NW Handleiding

13 Juni 2023

Perel LAMPH12S Handleiding

11 Juni 2023

Perel ABJ10T Handleiding

4 Juni 2023

Perel WLC003 Handleiding

4 Juni 2023

Perel MP61 Handleiding

27 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx 03863 Handleiding

24 December 2024

Vello PGS-P Handleiding

24 December 2024

Venom Quad Charging Station VS4796 Handleiding

24 December 2024

Nec IPJ2000CM Handleiding

24 December 2024

Monogram ZKPN Handleiding

24 December 2024

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024