Pelco PMC10A Handleiding

Pelco Monitor PMC10A

Lees hieronder de 📖 handleiding in het Nederlandse voor Pelco PMC10A (8 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 98 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
®
Installation/Operation
PMC10A
High-Resolution Color Monitor
C1992M-A (12/03)
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120
[ 2 ] Pelco Manual C1992M-A (12/03)
IMPORTANT SAFEGUARDS AND WARNINGS
1. Operate this unit only from the type of power source indicated on the label.
2. Do not block or cover ventilation openings on the back or bottom of the monitor cabinet.
3. Do not place this monitor near a radiator or heating vent.
4. Do not push objects of any kind through cabinet openings. This may result in fire or electrical shock.
5. Before adding attachments always ask a service technician to perform routine safety tests to deter-
mine that equipment is in safe operating condition. Ground potential tests should be part of the rou-
tine safety check made by the service technician.
6. Do not place monitor on an unstable cart, stand, or shelf where it may fall and injure personnel or
damage equipment.
7. Route power cords so that they cannot be walked upon or tripped over. Do not allow anything to rest
on the power cord.
8. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not spill liquid of
any kind on the unit.
9. Unplug the power cord from the unit before cleaning the display. Use only a damp cloth. Do not use
alcohol, spirits, or ammonia to clean the display. DO NOT ATTEMPT TO CLEAN THE INTERIOR OF
THIS UNIT-THIS ACTION MUST BE PERFORMED BY THE SERVICE TECHNICIAN AS REQUIRED
DURING NORMAL MAINTENANCE.
10. Refer all servicing to qualified service personnel. REMOVAL OF BACK COVER BY UNAUTHORIZED
PERSONNEL MAY EXPOSE THE USER TO DANGEROUS VOLTAGES OR OTHER HAZARDS.
11. Unplug the unit immediately and notify the service technician.
A. If liquid has been spilled into the display or the display has been exposed to rain or water.
B. If the unit has been dropped or the cabinet damaged.
C. If fuses continue to blow.
D. If the power cord is damaged or frayed.
E. If a distinct change from normal operation is apparent.
When replacement parts are required, be sure that the service technician uses components specified by
the manufacturer which have the same characteristics as the original parts. UNAUTHORIZED SUBSTI-
TUTIONS MAY RESULT IN FIRE, ELECTRICAL SHOCK OR OTHER HAZARDS.
Upon completion of any service or repairs, ask the technician to perform safety checks to determine that
the equipment is in safe operating condition.
WARNING: SERIOUS SHOCK HAZARDS EXIST WHIN THE COVERS OF THIS MONITOR. DO
NOT OPEN THE COVERS UNDER ANY CIRCUMSTANCES, THERE ARE NO USER SERVICEABLE
COMPONENTS INSIDE.
Pelco Manual C1992M-A (12/03) [ 3 ]
DESCRIPTION
The PMC10A is high-resolution, 10-inch (25.4 cm) color monitor. The unit has a resolution of 350 TV lines
producing an excellent-quality picture. The monitor's power input of 100-240 VAC, 50/60 Hz, is automati-
cally detected upon power up. All image adjustment controls are conveniently located on the front panel
of the monitor.


Product specificaties

Merk: Pelco
Categorie: Monitor
Model: PMC10A

Heb je hulp nodig?

Als je hulp nodig hebt met Pelco PMC10A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Pelco

Handleiding Monitor

Nieuwste handleidingen voor Monitor