Pelco FMCI-AF1MM1ST Handleiding

Pelco Niet gecategoriseerd FMCI-AF1MM1ST

Lees hieronder de 📖 handleiding in het Nederlandse voor Pelco FMCI-AF1MM1ST (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
C3923M-A / REV 07-28-14TECH SUPPORT: (800) 289-9100 INTERNATIONAL: +1 (559) 292-1981
INSTALLATION AND OPERATION MANUAL
FMCI-AF1/BF1 Series
10/100MBPS ELECTRICAL TO OPTICAL
ETHERNET MEDIA CONVERTERS
The FMCI-AF1/BF1 media converters convert 10/100Mbps Fast Ethernet from
an electrical signal to an optical signal and back to an electrical signal. The
electrical connection uses an RJ45 data connector.
Depending on the specific model in use, the optical connector is either a ST or
SC, 1 or 2 Fibers, multimode (MM) or singlemode (SM), and the unit operates
on either AC/DC or DC only power.
The standard size units may be directly plugged into the Rack (Pelco Part
US-RACK or EU-RACK) or operated as a standalone module. The small size
units operate as standalone modules only.
See Figures 1 – 6 for complete installation details.
This manual serves the
following Model Numbers:
FMCI-AF1MM1STM
FMCI-BF1MM1STM
FMCI-AF1SM1STM
FMCI-BF1SM1STM
FMCI-AF1MM1ST
FMCI-BF1MM1ST
FMCI-AF1SM1ST
FMCI-BF1SM1ST
TECH SUPPORT: (800) 289-9100 INTERNATIONAL: +1 (559) 292-1981 C3923M-A / REV 07-28-14
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the points where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
14. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases shall be placed on the
apparatus.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
16. Installation should be done only by qualified personnel and conform to all local codes.
17. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must
not be installed where exposed to rain and moisture.
18. Use only installation methods and materials capable of supporting four times the maximum specified load.
19. A CCC-approved power cord must be used to power this equipment when used in China.
20. In order to satisfy the EU Regulatory compliance Standards, the use of a universal power supply (UPS) is required on the AC mains.
21. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not
perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
C3923M-A / REV 07-28-14TECH SUPPORT: (800) 289-9100 INTERNATIONAL: +1 (559) 292-1981
INSTALLATION AND OPERATION MANUAL FMCI-AF1/BF1 SERIES
CAT5e/6
BLACK WITH WHITE STRIPE
BLACK
Power Supply:
Surface Mount: 8-15 VDC @ 2W
Rack Mount: From Rack
NOTE: Remove Electrical
Connector for Rack
Mount Units
FIGURE 2 – FMCI-(A,B)F1(SM,MM)1ST SERIES STANDARD SIZE UNIT
FIGURE 1 – FMCI-(A,B)F1(SM,MM)1ST SERIES STANDARD SIZE UNIT
REAR PANELFRONT PANEL
OPTICAL FIBER


Product specificaties

Merk: Pelco
Categorie: Niet gecategoriseerd
Model: FMCI-AF1MM1ST

Heb je hulp nodig?

Als je hulp nodig hebt met Pelco FMCI-AF1MM1ST stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Pelco

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd