Pavo Alaska Swift A4 Handleiding
Pavo
Lamineersysteem
Alaska Swift A4
Lees hieronder de 📖 handleiding in het Nederlandse voor Pavo Alaska Swift A4 (12 pagina's) in de categorie Lamineersysteem. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
1
Instruction Manual
Model: A3 / A4 Alaska Swift
Read this manual carefully before use. Keep it in safe for reference in need.
Thank you for buying this high-performance laminator! This laminator features a slim and
compact design. It accepts pouches ranging from cold, 75Mic, 100Mic to 125Mic with size
from name card to A4/A3.
2
PRODUCT DESCRIPTION
SPECIFICATION
Voltage: 220-240V/50Hz Power: 4A/850W Model A4
5.6A/1300W Model A3
Ready time: 90 sec/75mic
in a room temp 25 ℃
Max Entry width: 230 mm Model A4
320 mm Model A3
Max thickness: 0.6 mm (paper & pouch) Best for pouch: Cold/75/100/125 Micron
Laminating speed: 500mm/Min No. of Rollers: 4
SAFETY NOTES
1. This laminator should be horizontally displayed in a flat plane with good ventilation.
2. This laminator should only use power 220-240V/50Hz and be used indoors only.
3. This laminator is for home and office use only.
4. NEVER OPEN THIS LAMINATOR WHILE IN USE.
UTILITY
It laminates both cold and hot pouches from name card size to A4/A3 size. It provides best
lamination for hot pouches of 75Mic, 100Mic and 125Mic. It preserves your photo, document
and card, etc. in its original color against aging from prolonged time.
Entry
LED
Switch Button
Reverse Button
Mode Button
3
OPERATION
POWER ON and OFF
Connect the plug to mains power, press "Switch Button" and "Mode Button" to turn on the
machine. The "Power/Cold LED" would turn into Red firstly and flash, it will turn into green
when ready.
To turn off this laminator, press "Switch Button" back to "Off" position, power will be cut off
and laminator is shut off.
COLD LAMINATION
Please make sure the machine is cool when you use cold lamination. Do not use cold
lamination if you just finish the job of hot lamination. Please switch the power off and the
machine will reset itself.
When "Power/Cold LED" turns into green and stays steady, please insert the paper into the
cold pouch, and insert the pouch into laminator through lamination entry.
HOT LAMINATION
You could press down the "Mode Button" to select the pouch thickness (75mic, 100mic and
125mic), the correspondent LED would turn into Red and flash, when it turns into Green and
stays steady, please insert the paper into pouch, and insert the pouch into the laminator
through the lamination entry.
Note:
1. If the room temperature is cold, the warm up time would be a bit longer.
2. The warm up time for thicker pouch would be longer than 75micron pouch.
CLEAR THE JAMMED POUCH
This laminator is designed with an device to clear the jammed pouch. When auto jam release
a misfeed or jam occurs, press down "reverse button", The jammed pouch will be pulled out
automatically.
AUTO STOP
To save precious energy, this machine is designed to be shut off automatically when not be
used over 60 minutes. When the machine shut off automatically, all LEDs turn off. Under this
condition, there's still weak electric current inside, if you do not use this machine in a certain
period, please pull out the plug from the socket-outlet to shut it off completely.
In case machine is shut off automatically, to start machine again, please press "Mode" button
to turned on the machine again.
Product specificaties
| Merk: | Pavo |
| Categorie: | Lamineersysteem |
| Model: | Alaska Swift A4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Pavo Alaska Swift A4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lamineersysteem Pavo
12 Januari 2024
12 Januari 2024
12 Januari 2024
12 Januari 2024
12 Januari 2024
13 Juni 2023
Handleiding Lamineersysteem
- Lamineersysteem Quigg
- Lamineersysteem Brother
- Lamineersysteem DESQ
- Lamineersysteem Ednet
- Lamineersysteem Fellowes
- Lamineersysteem GBC
- Lamineersysteem Hama
- Lamineersysteem Hema
- Lamineersysteem Konig
- Lamineersysteem Leitz
- Lamineersysteem Lervia
- Lamineersysteem Marquant
- Lamineersysteem Nedis
- Lamineersysteem Powerfix
- Lamineersysteem Renkforce
- Lamineersysteem Royal Sovereign
- Lamineersysteem Sencor
- Lamineersysteem United Office
- Lamineersysteem Olympia
- Lamineersysteem Exibel
- Lamineersysteem Tracer
- Lamineersysteem Genie
- Lamineersysteem Aurora
- Lamineersysteem Q-CONNECT
- Lamineersysteem Peach
- Lamineersysteem Rexel
- Lamineersysteem GFP
- Lamineersysteem SEAL
Nieuwste handleidingen voor Lamineersysteem
5 December 2024
5 November 2024
5 November 2024
20 Oktober 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
8 Augustus 2024
2 Juli 2024