Parat Parasync Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Parat Parasync (6 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
USER GUIDE
PARASYNC for iPod/iPhone®
20-unit Charging and Synchronization Dock
For assistance, please contact PARAT Solutions
Toll free: 866-647-5976
Email: support@paratsolutions.com
31 Waterloo Avenue | Berwyn, PA 19312 T: 610-647-5976 F: 610-296-2504 paratsolutions.com| | |
PARASYNC for iPod/iPhone®
20-unit Charging and Synchronization Dock
Product description:
Charge and sync up to 20 Apple iPod/iPhondevices. Two auxiliary USB ports may be
used to attach USB peripherals.
INITIALIZATION
The following device settings are recommended when syncing with PARASYNC:
Model Recommended settings
iPod® nano/classic Clear Open iTunes when this iPod is attached” option listed in
iTunes on the Summary tab
iPod® touch SetOpen iTunes when this iPod is attachedoption listed in iTunes
on the Summary tab
iPhon SetAutomatically sync when this iPhone is connectedoption listed
in iTunes on the Summary tab
31 Waterloo Avenue | Berwyn, PA 19312 T: 610-647-5976 | | F: 610-296-2504 paratsolutions.com|
OPERATION
To charge devices without a computer connection:
1. Connect the AC power cord to the power supply and plug into a wall outlet.
2. Connect the power supply to the dock Power connector.
3. Press and release the Power button to turn on the dock (Status Indicator turns solid green).
4. Insert iPod/iPhone® devices into slots.
Note: Each iPod/iPhone® indicates its charge status. Refer to iPod/iPhone® product
manuals for details.
To sync devices:
1. If the dock is already charging devices without a computer connection, skip to step 3.
2. Follow steps 1 through 3 from section “To charge devices without a computer
connection”.
3. Connect the included USB cable from an Apple computer USB port to the USB port for
computer connection on the dock. The dock Status Indicator will display rapid flashing
followed by slow flashing, which indicates that the dock is ready for syncing.
4. Use Apple iTunes® to sync devices.
Note: The devices will charge after syncing completes. You can also charge the units
without a computer by simply unplugging the USB cable to the computer after syncing
completes.
To turn the dock off:
1. If the dock is connected to a computer: verify that syncing operations are complete and
then disconnect the dock from the computer.
2. Press and hold Power button until Status Indicator turns off (about 2 seconds).
31 Waterloo Avenue | Berwyn, PA 19312 T: 610-647-5976 F: 610-296-2504 paratsolutions.com| | |


Product specificaties

Merk: Parat
Categorie: Cradle/docking station
Model: Parasync
Kleur van het product: Wit
Gewicht: 3000 g
Breedte: 270 mm
Diepte: 320 mm
Hoogte: 50 mm
Bluetooth: Nee
Type stroombron: AC
Stroomuitvoer (ampère): 13 A
Aantal USB 2.0-poorten: 2
Certificering: UL standard 60950-1, CSA C22.2 No. 60950-1-07
Audio-uitgang: Nee
HDMI: Nee
Merkcompatibiliteit: Apple
Compatibiliteit: iPod touch, iPod nano/classic, iPhone dock
Dockingconnector soort: Apple 30-pin
Standaard apparaat type: MP3-speler/smartphone
AC-ingangsspanning: 100-240 V
AC-ingangsfrequentie: 47/63 Hz

Heb je hulp nodig?

Als je hulp nodig hebt met Parat Parasync stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Cradle/docking station Parat

Handleiding Cradle/docking station

Nieuwste handleidingen voor Cradle/docking station