Paradigm BD1 Handleiding

Paradigm Niet gecategoriseerd BD1

Lees hieronder de 📖 handleiding in het Nederlandse voor Paradigm BD1 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 92 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

BD 1’s LED WHAT IS IT TELLING YOU?

LED flashes red and blue alternately BD 1 is in pairing mode

Blue LED flashes once every 2 seconds BD 1 is in standby mode and not connected

Blue LED flashes twice every 5 seconds BD 1 is synched with the Bluetooth-

enabled device

Red LED flashes once every 20 seconds BD 1 is at low power

and BD 1 emits audible tones

• BD 1 Bluetooth Receiver

• AC adaptor and cable

• Built-in 250mAH Li-polymer rechargeable battery

Power ON: Press and hold the power button for 3 to 5 seconds

Power OFF: Press and hold power the power button for 3 to 5 seconds

The Paradigm SHIFT BD 1 is a universal Bluetooth receiver that lets you stream music from any

Bluetooth-enabled device supporting an Advanced Audio Distribution Profile (A2DP) or Audio/Video

Remote Control Profile (AVRCP). This includes the iPhone, Android and Blackberry phones and other

Bluetooth-enabled devices such as laptops and tablet PCs.

Customers outside of North America

For our international customers the unit comes with a USB cable that plugs into a USB AC power

converter (not included).

NOTE: The international version of this unit is designated BD 1E, however for information

purposes in this manual it will be referred to as BD 1.

See "GETTING STARTED" section.

(North American customers)

1. Plug the power supply into an AC outlet like the one on the back of the A2 speaker (see

diagram). Plug the other end into the jack marked ‘input’ on the BD 1 receiver

2. The BD 1’s red LED will come on, this tells you the unit is charging. A full charge takes

approximately 2.5 hours. When the unit is charged, the red LED will go out.

3. The BD 1 can operate from the AC power and can remain plugged in. If desired, unplug and

remove the AC power supply and operate the BD 1 off battery power.

4. Plug the BD 1’s 3.5-mm cable into the 3.5-mm jack on your device (see diagram of the A2’s

stereo input below as an example).

(Customers outside of North America only)

1. Connect the supplied USB cable into a USB AC power converter (sold separately)

2. Plug the power supply into a power outlet. Plug the other end into the jack marked ‘input’ on the

BD 1E receiver.

3. The BD 1E’s red LED will come on, this tells you the unit is charging. A full charge takes

approximately 2.5 hours. When the unit is charged, the red LED will go out.

4. The BD 1E can operate from the AC power and can remain plugged in. If desired, unplug and

remove the AC power supply and operate the BD 1E off battery power.

5. Plug the BD 1E’s 3.5mm cable into the 3.5mm jack on your device (see diagram of the A2’s

stereo input below as an example).

(All customers)

1. Turn off the BD 1

2. Place your Bluetooth-enabled mobile phone about 1 meter (approximately 3 feet) away from the BD 1

(once synching is complete maximum distance to maintain connection is approximately 10m/30ft)

3. Press and hold down the BD 1’s power button for about 6 seconds until its LED alternates between

Red and Blue

4. Activate your mobile phone’s Bluetooth settings (located under ‘Phone Settings’ or ‘Settings’ ) and let

the phone search for Bluetooth devices within range. Once it has found all devices select “SHIFT BD 1”

from the list

5. If prompted for a password or PIN Number enter: “0000”

6. If prompted by your phone to connect, select: “Yes” or “Connect”

7. Once a connection has been established the BD 1’s Blue LED will flash twice every five seconds.

NOTE: The LED will continue to flash until the BD 1 and the connected device are no longer connected

or out of synch distance from each other

• If no devices are sensed, the BD 1 will automatically turn off within five minutes

• After successful synching, the BD 1 and smart phone will remember each other and you will not have

to resynch again. If for some reason you do have to resynch, simply follow Steps 1 through 7 above.

• Each time the BD 1 is turned on it will automatically try to connect to the last device to which it was

connected. If you want to synch it with a new Bluetooth device, go to ‘Settings’ or ‘Phone Settings’ on

your phone and turn off the Bluetooth function of the last connected device and synch with the new

device following Steps 1 through 7 above.

• If the BD 1 is turned on but will not synch to the new device, press the power button twice and

synching should occur. If not, refer to the "Troubleshooting" section

• When the receiver and the Bluetooth-enabled device are out of range of each other they will be

automatically disconnected. They will automatically reconnect once they are again within range.

In order for you to get the best from your BD 1, read the following recommendations:

• Do not expose the receiver to liquid, moisture or humidity as this will damage the product’s internal circuit

and such damage is not covered under warranty

• Clean only with soft cloth. Do not use household cleaners or solvents of any kind.

• Do not expose the receiver to extremely high or low temperature as this will shorten the battery life.

• Do not dispose of the BD 1 in an incinerator or fire as this will result in a dangerous explosion.

Recycle the product according to the recycling directions at the beginning of this manual and

according to your local laws and bylaws

• If the BD 1 will not be used for an extended period of time place it in a clean, dry place free from

high temperatures, humidity, moisture and dust

The BD 1 won’t turn on

• Make sure the battery is charged or that the unit is connected to the AC adapter and plugged into

an un-switched, powered AC outlet. If the unit will not turn on with the AC adapter connected and

powered, unplug the unit from wall socket for a few seconds then reconnect the AC power to reset

the unit’s internal circuitry.

The BD 1 won’t turn off

• Make sure the battery is charged or the unit is connected to the AC adapter and plugged into an

un-switched, powered AC outlet. If the unit will not turn on with the AC adapter connected and

powered, unplug the unit from wall socket for a few seconds, then reconnect the AC power to

reset the unit’s internal circuitry.

The BD 1 won’t connect to the device

• Make sure the Bluetooth-enabled device is no more than 1 meter (3 feet) away from the BD 1 when

performing the synching operation.

• Recheck to ensure the device is:

a) Bluetooth-enabled and

b) Supports Advanced Audio Distribution Profile (A2DP) or Audio/Video Remote Control Profile (AVRCP)

• Make sure your phone’s Bluetooth settings are enabled and that “SHIFT BD 1” is selected

• Repeat steps 1 through 7 listed at the top of this page.

NOTE: If synching still fails after all of the above troubleshooting attempts have been tried please refer

to the Owners Manual for your Bluetooth-enabled device for additional information and/or solutions.

Bluetooth Version Bluetooth v2.1

Bluetooth Profiles Supported A2DP and AVRCP

Frequency Range 2.402 GHz – 2.480 GHz

Operating Distance 10 meters (approximately 30 feet), Class II

Synching Distance 1meter (approximately 3 feet), Class II

Charging Input Voltage/Current DC 5V 300mA

Standby Time 230 hours

Battery Life Up to 12 hours

Dimensions 45 mm x 33 mm x 8 mm

Weight 14 g

Paradigm warrants this product against defects in materials and workmanship under normal use and

operation for a period of one (1) year from the date of purchase by the original end-user/purchaser.

Maintain your original sales receipt for proof of purchase. For complete warranty information visit our

website at www.paradigm.com/shift.

(All customers)

If using the BD 1 with a laptop PC or tablet, refer to your device’s Operating Manual for how to

enable Bluetooth, then follow steps 1 through 7 above.

Music should pause automatically when you dial a phone number or receive an incoming call.

NOTE: This feature may not work on all Bluetooth-enabled phones. Check your device’s Operating Manual.

WARNING/ADV ERTISSMENT

RISK OF ELEC TRIC SHOC K. DO NOT OPEN.

RISQ E DE CHOC ELECTR IQUE. NE PAS OUVRIR.

WARNING/ADVE RTISSMENT

RIS OF ELECTRIC S HOCK . DO NOT OP EN.

RIS QUE E CHOC ELECTRI QUE. NE PA S OUVRIR.

WARN

RISK OF E LE

RISQ UE DE CH O C

WARN

RISK OF E LE

RISQ UE DE CH O C

Product specificaties

Merk:	Paradigm
Categorie:	Niet gecategoriseerd
Model:	BD1

Heb je hulp nodig?

Als je hulp nodig hebt met Paradigm BD1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Paradigm

Paradigm Decor 2SC v2 Handleiding

2 April 2024

Paradigm Decor 1C v2 Handleiding

2 April 2024

Paradigm Decor 2S v2 Handleiding

2 April 2024

Paradigm Decor 1S v2 Handleiding

2 April 2024

Paradigm SE Center Handleiding

6 December 2023

Paradigm CI Home H65-SM Handleiding

6 December 2023

Paradigm Stylus 470 Handleiding

6 December 2023

Paradigm Founder 70LCR Handleiding

6 December 2023

Paradigm CI Pro P80-A v2 Handleiding

6 December 2023

Paradigm CI Elite E7 LCR v2 Handleiding

6 December 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo VPPI Handleiding

21 November 2024

Festo VAVE-P17-TP-5YL1-P Handleiding

21 November 2024

Festo SD-SUB-D-BU9 Handleiding

21 November 2024

Festo SAMH-F12-MK Handleiding

21 November 2024

Festo SFAB Handleiding

21 November 2024

Festo SFAH Handleiding

21 November 2024

Festo DRRD-12 Handleiding

21 November 2024

Festo SDE3 Handleiding

21 November 2024

Festo SFTE Handleiding

21 November 2024

Festo CRVZS-5 Handleiding

21 November 2024