Panasonic WV-Q189 Handleiding

Panasonic Niet gecategoriseerd WV-Q189

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic WV-Q189 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Operating Instructions

Included Installation Instructions

Corner Mount Bracket

Model No. WV-Q183 / WV-Q189

(Light Gray) (Fine Silver)

For U.S. and Canada:

Panasonic i-PRO Sensing Solutions

Corporation of America

800 Gessner Rd, Suite 700 Houston, TX 77024

https://www.security.us.panasonic.com/

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada

1-877-495-0580

https://www.panasonic.com/ca/

For Europe and other countries:

Panasonic Corporation

http://www.panasonic.com

Panasonic i-PRO Sensing Solutions Co., Ltd.

Fukuoka, Japan

Authorised Representative in EU:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Before attempting to connect or install this product,

please read these instructions carefully and save this manual for future use.

The model number is abbreviated in some descriptions in this manual.

Specifications

Ambient operating temperature: –50 °C to +60 °C {–58 °F to 140 °F}

Dimensions: 230 mm (L) × 246 mm (W) × 155 mm (H)

{9-1/16 inches (L) × 9-11/16 inches (H) × 6-3/32 inches (H)}

Mass: Approx. 1.3 k {2.87 lbs}g

Finish: Aluminum die cast

Light gray <WV-Q183>

Fine silver <WV-Q189>

Precautions

Refer installation work to the dealer.

Installation work requires technique and experiences. Failure to observe this may cause fire, electric

shock, injury, or damage to the product.

Be sure to consult the dealer.

The exclusively designed mount bracket shall be used.

Failure to observe this may cause a drop resulting in injury or accidents.

Use the exclusively designed mount bracket for installation.

Do not install this product in locations subject to vibration.

Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents.

Install this product in a location high enough to avoid people and objects from

bumping the product.

Failure to observe this may cause injury.

The measures of protection against a fall of this product shall be taken.

Failure to observe this may cause a drop resulting in injury.

If there is specified safety wire, please make sure to install it.

The screws and bolts must be tightened to the specified torque.

Failure to observe this may cause a drop resulting in injury or accidents.

Select an installation area that can support the total weight.

Selecting an inappropriate installation surface may cause this product to fall down or topple over,

resulting in injury or accidents.

Installation work shall be started after sufficient reinforcement.

Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents.

Consult the dealer for the inspections.

Do not hang down from this product or use this product as a pedestal.

Failure to observe this may cause injury or accidents.

Do not use this bracket except with specified cameras or other brackets.

Failure to observe this may cause a drop resulting in injury or accidents.

Avoid installing this bracket in the locations where salt damage occurs or corro-

sive gas is produced.

Otherwise, the mounting portions will deteriorate and accidents such as a fall of this product may occur.

Do not install this product on a place that is greatly influenced by wind.

Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall

of the product resulting in injury or accidents.

Do not attempt to disassemble or modify this product.

Failure to observe this may cause a fall of the product resulting in injury or accidents.

Consult the dealer for the repair or inspections.

Do not rub the edges of metal parts with your hand.

Strong rubbing may cause injury.

The measures of protection against snowfall shall be taken.

Weight of snow may cause a fall of the product resulting in injury or accidents.

Protect the product against snowfall by installing under eaves.

Precautions for installation Installations/Connections

Panasonic assumes no responsibility for injuries or property damage resulting

from failures arising out of improper installation or operation inconsistent with

this documentation.

In order to prevent injury, the product must be securely mounted to the wall (corner)

according to Operating Instructions.

Installation area for this product

• Please consider the influence of vibration and wind at the installation site and mount the bracket

onto the wall with appropriate strength.

Installable corner Corner part of a vertical and right-angle wall:

• Do not mount the product on a plaster board or a wooden section because they are too weak.

If the product is unavoidably mounted on such a section, the section shall be sufficiently reinforced.

• After the bracket is mounted, please verify the following content once a year. In the event of

abnormality, please inform the dealer.

• Do not allow any slanting, distortion or offset in installation.

• Bracket should not have any serious rust or damage.

• Please refer to Panasonic's support website (https://security.panasonic.com/support/info/) for installa-

tion information of the bracket.

About the installation methods

• The bracket is specifically designed for installation onto a corner of the wall.

• Prepare mounting screws (M8 8 pcs.) and anchor bolts to be mounted on a wall separately.

• Select screws according to the material of the location that the bracket will be mounted to.

Minimum pull-out strength: 823 N {185 lbf} (per 1 pc.)

• After the installation is finished, please check if there are slackness or shaking of screws and rais-

ing of mount bracket.

In the event of abnormality, please tighten again.

Check before the installation.

Once the bracket is installed with a deformed mount bracket and/or damaged part, it could poten-

tially fall. Before the installation, please make sure to check the appearance of the bracket.

Do not place this product in the following places:

• Locations where a chemical agent is used such as a swimming pool.

• Locations that have a specific environment that is subject to an inflammable atmosphere or solvents.

• In areas by the sea or the seashore, regions with snow melt agent scattered and locations that

produce a corrosive gas such as volcanic areas and hot springs.

• Locations where the ambient operating temperature of camera is not within the specified range.

• Locations subject to vibrations, such as on vehicles, marine vessels, or above product lines.

(This bracket is not designed for on-vehicle use.)

Screw tightening

• Make sure to tighten the screws (accessory) that fix camera or mount bracket onto WV-Q183/

WV-Q189.

• Do not use an impact driver. Use of an impact driver may damage the screws or cause tightening

excessively.

• When a screw is tightened, make the screw at a right angle to the surface. After tightening the

screws or bolts, perform checks to ensure that the tightening is sufficient enough so that there is

no movement or looseness.

Make sure to remove this product if it will no longer be used.

Preface

WV-Q183/WV-Q189 (corner mount bracket) is designed to be used to install a camera or mount

bracket for camera to an external corner of building.

• WV-Q183 is different with WV-Q189 in color, and same in structure. This manual takes WV-Q189

as an example for explanation.

(In this illustration, fixing WV-Q122A to a corner by using WV-Q189 is taken as an example.)

Features

Parts and functions

WV-Q189

WV-Q122A

(Other optional

accessory)

M10 hexagon screws

(4 pcs. accessory)

M8 screw (8 pcs. locally

procured)

Standard accessories

<WV-Q189>

Operating Instructions (this document) 1 pc. .........................................................................................

Use the following accessories as the installation requires (use of all accessories together will likely not

be necessary):

Safety wire fixing bracket 1 pc. .............................................................................................................

M10 × 30 mm {1-3/16 inches} hexagon screws 5 pcs. ........................................................................

M6 × 16 mm {5/8 inches} hexagon screws 2 pcs. ................................................................................

M5 × 20 mm {25/32 inches} screws 5 pcs. ..........................................................................................

M4 × 16 mm {5/8 inches} screws 4 pcs. ..............................................................................................

M3 × 10 mm {13/32 inches} screws 2 pcs. ..........................................................................................

<WV-Q183>

Operating Instructions (this document) 1 pc. .........................................................................................

M10 × 30 mm {1-3/16 inches} hexagon screws 5 pcs. (1 spare) ..........................................................

Note:

• One spare is provided for each type of screw.

• A Hexagon wrench (procured locally) is needed when M10 or M6 hexagon screw is used.

(In this manual, hexagon socket head cap screw is described as hexagon screw.)

Install the mount bracket onto a corner

①Place WV-Q189 to the corner to be installed,

and marked the position of eight screw holes.

②According to the type of screw (M8, locally

procured), drill eight holes at the marked posi-

tion.

Note:

• -The corner must enough solid to sup

port the products installed on it.

WV-Q189

③Pass the cable to be connected with camera through the cable

access hole and pull out an adequate length as needed for the

camera.

Note:

• Please make sure the arrow on the

corner mount bracket is upward.

Cable

Cable access hole

④Use eight M8 screws (locally procured) to install

WV-Q189 onto the corner.

Minimum pull-out strength: 823 N {185 lbf} (per 1 pc.)

WV-Q189

M8 screw (8 pcs.

locally procured)

Upper mark:

WV-Q189

c) Mount the camera onto adapter box (accessory provided with camera) please refer to the manual

of camera.

Camera

Use one M6 hexagon screw (accessory) to fix the safety wire of the camera onto the safety wire fix-

ing bracket (accessory).

(Recommended tightening torque: 2.45 N·m {1.81 lbf·ft})

Safety wire fixing

bracket (accessory)

Safety wire

M6 hexagon screw

(accessory)

Note:

• These network cameras applicable in this installation method can be also directly installed onto

corner mount bracket without using adapter box, for the detailed installation method, please

refer to .Ⓓ

Applicable network camera: WV-SPW532L, WV-SPW312L

* The installation needs one M10 hexagon screw (accessory), three M4 screws (accessory), one M6 hexa-

gon screw (accessory) and one safety wire fixing bracket (accessory).

a) Use one M10 hexagon screw (accessory) to install the safety wire

fixing bracket (accessory) on the top left corner of WV-Q189.

(Recommended tightening torque: 10.8 N·m {7.97 lbf·ft})

b) Before installing the camera, please rotate the camera mount

bracket so that its side cable access hole is downward. For

more information about the adjustment method, please refer

to the manual of camera.

c) Align the three installation holes of WV-SPW312L or WV-SPW532L with the M4 screw hole (3 places)

of WV-Q189, and fix WV-SPW312L or WV-SPW532L with three M4 screws (accessory).

(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})

Side cable

access hole

WV-Q189

Side cable access hole

PAN lock screw

180 °

M4 screw

(3 pcs. accessory)

Camera

mount

bracket

b) c)

d) Use one M6 hexagon screw (accessory) to fix the safety wire of the camera onto the safety wire

fixing bracket.

(Recommended tightening torque: 2.45 N·m {1.81 lbf·ft})

M6 hexagon screw

(accessory)

Safety wire

Safety wire fixing

bracket (accessory)

Ⓑ

Install network camera with round camera mount bracket <WV-Q189>

* The installation needs four M10 hexagon screws (accessory).

For the camera connect and installation with WV-Q185/WV-Q122A, please refer to the Operating

Instruction of WV-Q185/WV-Q122A.

Align the four installation holes of WV-Q185/WV-Q122A with the M10 screw hole (4 places) of WV-Q183/

WV-Q189, and fix WV-Q185/WV-Q122A with four M10 hexagon screws (accessory).

(Recommended tightening torque: 10.8 N·m {7.97 lbf·ft})

WV-Q122A (option)

(Other optional

accessory)

M10 screw hole (4 places)

M10 hexagon screws

(4 pcs. accessory) WV-Q189

Ⓐ

Install cameras using WV-Q185 (Wall mount bracket: Light gray) or

WV-Q122A (Wall mount bracket: Fine silver) <WV-Q183> <WV-Q189>

Note:

• When install WV-Q185 (Wall mount bracket: Light gray), please use WV-Q183 (Light gray).

• When install WV-Q122A (Wall mount bracket: Fine silver), please use WV-Q189 (Fine silver).

Applicable network camera: WV-SPW531AL, WV-SPW311AL

* The installation needs four M5 screws (accessory), one M6 hexagon screw (accessory), one M10

hexagon screw (accessory) and one safety wire fixing bracket (accessory).

a) Use one M10 hexagon screw (accessory) to install the safety wire

fixing bracket (accessory) on the top left corner of WV-Q189.

(Recommended tightening torque: 10.8 N·m {7.97 lbf·ft})

Ⓓ Install network camera with quadrangle camera mount bracket

<WV-Q189>

Installations/Connections (continued)

WV-Q183/WV-Q189 (corner mount bracket) is designed to be used to install following camera or

mount bracket for camera. (As of November, 2017)

For the latest information about the mountable models, refer to Panasonic support web site

(https://security.panasonic.com/support/info/).

Cameras installed with WV-Q189: cameras can be directly installed with WV-Q189

• WV-SPW series outdoor box type network camera

WV-SPW631LT, WV-SPW631L, WV-SPW611L, WV-SPW611, WV-SPW531AL, WV-SPW532L,

WV-SPW311AL, WV-SPW312L

• WV-S series outdoor box type network camera

WV-S1531LTN, WV-S1531LN, WV-S1511LN

• WV-SPV series outdoor box type network camera

WV-SPV781L

• WV-CW series outdoor box type color CCTV camera

WV-CW324LE, WV-CW314L, WV-CW314LE, WV-CW304LE

Mount bracket installed with WV-Q183/WV-Q189: install camera onto WV-Q183/WV-Q189 by using

other mount bracket

WV-Q183 (Light gray): WV-Q185

WV-Q189 (Fine silver): WV-Q120A, WV-Q122A

IMPORTANT:

• Only 1 camera or mount bracket can be installed with WV-Q183/WV-Q189, please do not install

camera or mount bracket other than the above models.

Please choose one appropriate way from the following five installation methods according

to the camera to be installed. For the cables connected to camera, please refer to the man-

ual of camera.

Ⓐ Install cameras using WV-Q185 (Wall mount bracket: Light gray) or WV-Q122A (Wall

mount bracket: Fine silver) <WV-Q183> <WV-Q189>

Ⓑ Install network camera with round camera mount bracket <WV-Q189>

Ⓓ Install network camera with quadrangle camera mount bracket <WV-Q189>

Ⓔ Install network camera with adapter box (accessory provided with camera) <WV-Q189>

Install camera or mount bracket for camera to corner mount bracket

Applicable color CCTV camera: WV-CW324LE, WV-CW314L, WV-CW314LE, WV-CW304LE

* The installation needs three M4 screws (accessory) and one M3 screw (accessory).

Before installing the camera, please rotate the camera mount bracket so that its side cable access

hole is downward. For more information about the adjustment method, please refer to the manual of

camera.

b) Align the three installation holes of camera mount bracket with the M4 screw hole (3 places) of

WV-Q189, and fix the camera with three M4 screws (accessory).

(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})

c) Use one M3 screw (accessory) to fix the safety wire of the camera onto WV-Q189.

(Recommended tightening torque: 0.59 N·m {0.44 lbf·ft})

Side cable

access hole WV-Q189

M3 screw (accessory)

Camera mount bracket

Side cable access hole

PAN lock screw

180 °

M4 screw

(3 pcs. accessory)

Safety wire

a) b) c)

<WV-Q189>

Safety wire connecting screw hole

M3 screw hole (1 place)

Size: 180 mm (H) × 80 mm (W)

{7-3/32 inches (H) × 3-5/32 inches (W)}

M10 screw hole (4 places)

Size: 83.5 mm (H) × 46 mm (W)

{3-9/32 inches (H) × 1-13/16 inches (W)}

M5 screw hole (4 places)

Size for installation side

b) Align the four installation holes of adapter box with the M5 screw hole (4 places) of WV-Q189,

and fix adapter box with four M5 screws (accessory).

(Recommended tightening torque: 1.86 N·m {1.37 lbf·ft})

M5 screw

(4 pcs. accessory)

Adapter box

(accessory provided

with camera)

WV-Q189

Applicable network camera: WV-SPW631LT, WV-SPW631L, WV-SPW611L, WV-SPW611,

WV-S1531LTN, WV-S1531LN, WV-S1511LN, WV-SPV781L

* The installation needs four M5 screws (accessory), one M6 hex-

agon screw (accessory), one M10 hexagon screw (accessory)

and one safety wire fixing bracket (accessory).

a) Use one M10 hexagon screw (accessory) to install the safety wire

fixing bracket (accessory) on the top left corner of WV-Q189.

(Recommended tightening torque: 10.8 N·m {7.97 lbf·ft})

Ⓔ Install network camera with adapter box <WV-Q189>

■Size illustration for installing part of WV-Q183/WV-Q189

Locating hole

Prominence of safety

wire fixing bracket

M10 hexagon

screw (accessory)

Safety wire fixing bracket

(accessory)

Locating hole

Prominence of safety

wire fixing bracket

M10 hexagon

screw (accessory)

Safety wire fixing bracket

(accessory)

b) Align the four installation holes of camera mount bracket with the M5 screw hole (4 places) of

WV-Q189, and fix the camera with four M5 screws (accessory).

(Recommended tightening torque: 1.86 N·m {1.37 lbf·ft})

For the fix of camera mount bracket cover (accessory attached with the camera), please refer to

the manual of camera.

M5 screw

(4 pcs. accessory)

Mounting screw for camera mount

bracket cover (accessory attached

with the camera)

Camera mount bracket cover

(accessory attached with the camera)

Mounting screw for camera

mount bracket cover

(accessory attached with

the camera)

Camera mount bracket cover

(accessory attached with the camera)

Camera mount

bracket

c) Use one M6 hexagon screw (accessory) to fix the safety wire of the camera onto the safety wire

fixing bracket

(accessory)

(Recommended tightening torque: 2.45 N·m {1.81 lbf·ft})

Safety wire fixing bracket

(accessory)

Safety wire

M6 hexagon screw

(accessory)

Note:

• The two network cameras applicable in this installation method can be also connected to

WV-Q189 through WV-Q120A. For the detailed installation method, please refer to (WV-Q120A Ⓔ

and adapter box are similar in structure).

Size: ø75 mm {ø2-15/16 inches (H)}

M4 screw hole (3 places)

Locating hole

Prominence of safety

wire fixing bracket

M10 hexagon

screw (accessory)

Safety wire fixing bracket

(accessory)

2 4

Product specificaties

Merk:	Panasonic
Categorie:	Niet gecategoriseerd
Model:	WV-Q189

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic WV-Q189 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Panasonic

Panasonic MultiShape ER-CKN3 Handleiding

25 November 2024

Panasonic NB-W250 Handleiding

25 November 2024

Panasonic SC-XH100 Handleiding

24 November 2024

Panasonic DMW-AVC1 Handleiding

24 November 2024

Panasonic DMW-GMC1 Handleiding

24 November 2024

Panasonic DMW-LMCH62E Handleiding

23 November 2024

Panasonic AK-HCU250PSJ Handleiding

20 November 2024

Panasonic AW-PS551PJ Handleiding

7 November 2024

Panasonic ER-CFC1 Handleiding

26 September 2024

Panasonic DMW-XLR2 Handleiding

7 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Kolcraft MLB Chicago Cubs Handleiding

26 November 2024

Kolcraft MLB New York Yankees Handleiding

26 November 2024

Kolcraft MLB San Francisco Giants Handleiding

26 November 2024

Kolcraft MLB St. Louis Cardinals Handleiding

26 November 2024

Nedis POCO106 Handleiding

26 November 2024

Nedis BTSM1GY Handleiding

26 November 2024

Turbosound TPOLEAJ-01 Handleiding

26 November 2024

Turbosound TSTAND-01 Handleiding

26 November 2024

IFM TAD981 Handleiding

26 November 2024

IFM TAD961 Handleiding

26 November 2024