Panasonic KX-TG2120 Handleiding

Panasonic Telefoon KX-TG2120

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic KX-TG2120 (4 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Ringer on/off

You can turn the ringer on/off. The default setting is “ON”.

1 Press [FUNCTION] 5 times until “RINGER” is displayed.

2 Select “ON [ ] [ ]” or “OFF” by using  or .

3 Press [EDIT], then press [OFF].

Note:

• When the ringer is set to off, the handset does not ring for outside

calls.

Dialing mode

If you cannot make calls, change this setting according to your telephone

line service. The default setting is “TONE”.

“TONE”: For tone dial service.

“PULSE”: For rotary pulse dial service.

1 Press [FUNCTION] 6 times until “DIAL MODE

” is displayed.

2 Select “PULSE TONE [ ] [ ]” or “ ” by using  or .

3 Press [EDIT], then press [OFF].

Note:

• For KX-TG2122 users: When you change the dialing mode setting,

make sure you change it on both handsets.

Resetting the handset to its default setting

Feature Default setting

Language ENGLISH

Area code ---

Ringer tone RINGER TONE 1

Ringer ON

Dial mode TONE

Default setting NO

Receiver volume level Vol. 2

1 Press [FUNCTION] 7 times until “DEFAULT” is displayed.

2 Select “YES NO [ ] [ ]” or “ ” by using  or .

3 Press .[EDIT]

Introduction

1 Introduction

Thank you for purchasing a Panasonic cordless telephone.

We recommend keeping a record of the following information for future

reference.

Serial No. Date of purchase

(found on the bottom of the base unit)

Name and address of dealer

Attach your purchase receipt here.



4 Important safety instructions

When using the product, basic safety precautions should always be

followed to reduce the risk of fire, electric shock, or personal injury.

1. Read all instructions carefully.

2. Follow all warnings and instructions marked on the product.

3. Unplug the product from power outlets before cleaning. Do not use

liquid or aerosol cleaners. Use a moist cloth for cleaning.

4. Do not use the product near water, for example near a bathtub, wash

bowl, kitchen sink, etc.

5. Place the product securely on a stable surface. Serious damage and/or

injury may result if the product falls.

6. Do not cover slots and openings on the product. They are provided for

ventilation and protection against overheating. Never place the product

near radiators, or in a place where proper ventilation is not provided.

7. Use only the power source marked on the product. If you are not sure

of the type of power supplied to your home, consult your dealer or local

power company.

8. Do not place objects on the power cord. Install the product where no

one can step or trip on the cord.

9. Do not overload power outlets and extension cords. This can result in

the risk of fire or electric shock.

10 Never push any objects through slots in the product. This may result in

the risk of fire or electric shock. Never spill any liquid on the product.

11. To reduce the risk of electric shock, do not disassemble the product.

Take the product to an authorized service center when service is

required. Opening or removing covers may expose you to dangerous

voltages or other risks.

Incorrect reassembly can cause electric shock when the product is

subsequently used.

12. Unplug the product from power outlets and take to an authorized

service center when the following conditions occur:

A. When the power cord is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not work normally by following the operating

instructions. Adjust only controls covered by the operating

instructions. Improper adjustment may require extensive work by an

authorized service center.

E. If the product has been dropped or physically damaged.

F. If the product exhibits a distinct change in performance.

13. During thunderstorms, avoid using telephones except cordless types.

There may be a remote risk of an electric shock from lightning.

14. Do not use the product to report a gas leak, when in the vicinity of the

leak.

SAVE THESE INSTRUCTIONS

CAUTION:

Installation

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations.

• Never touch uninsulated telephone wires or terminals unless the

telephone line has been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

• Do not touch the plug with wet hands.

• The AC adaptor is used as the main disconnect device. Ensure that the

AC outlet is installed near the product and is easily accessible.

Battery

To reduce the risk of fire or injury to persons, read and follow these

instructions.

• Use only the battery(ies) specified.

• Do not dispose of the battery(ies) in a fire. They may explode. Check

with local waste management codes for special disposal instructions.

• Do not open or mutilate the battery(ies).

Released electrolyte is corrosive and may cause burns or injury to the

eyes or skin. The electrolyte may be toxic if swallowed.

• Exercise care when handling the battery(ies). Do not allow conductive

materials such as rings, bracelets or keys to touch the battery(ies),

otherwise a short circuit may cause the battery(ies) and/or the

conductive material to overheat and cause burns.



• Charge the battery(ies) provided, or identified for use with the product

only, in accordance with the instructions and limitations specified in this manual.

WARNING:

• To prevent the risk of fire or electrical shock, do not expose the product

to rain or any type of moisture.

• Unplug the product from power outlets if it emits smoke, an abnormal

smell, or makes an unusual noise. These conditions can cause fire or

electric shock. Confirm that smoke has stopped emitting and contact

the Panasonic Call Center at 1-800-211-PANA (1-800-211-7262).

Medical

• Consult the manufacturer of any personal medical devices, such as

pacemakers or hearing aids, to determine if they are adequately

shielded from external RF (radio frequency) energy. (The product

operates in the frequency range of 911.171 MHz to 913.066 MHz and

2480.0 MHz to 2482.9 MHz, and the power output is 1 mW (max.).) Do

not use the product in health care facilities if any regulations posted in

the area instruct you not to do so. Hospitals or health care facilities may

be using equipment that could be sensitive to external RF energy.

5 For best performance

Base unit location/avoiding noise

The base unit and other compatible Panasonic units use radio waves to

communicate with each other.

For maximum distance and noise-free operation, we recommend the

following:

• Placing the product away from electrical appliances.

• Placing the base unit in a HIGH and CENTRAL location with no

obstructions such as walls.

• Raising the antenna vertically.

• If you use the handset near a microwave oven which is being used,

noise may be heard. Move away from the microwave oven and closer

to the base unit.

• If you use the handset near another cordless phone’s base unit, noise

may be heard. Move away from the other cordless phone’s base unit

and closer to your base unit.

Environment

• Keep the product away from electrical noise generating devices, such

as fluorescent lamps and motors.

• The product should be kept free from excessive smoke, dust, high

temperature, and vibration.

• The product should not be exposed to direct sunlight.

• Do not place heavy objects on top of the product.

• When you leave the product unused for a long period of time, unplug

the product from the power outlet.

• The product should be kept away from heat sources such as heaters,

kitchen stoves, etc. It should not be placed in rooms where the

temperature is less than 5 C (41 F) or greater than 40 C (104 F).° ° ° °

Damp basements should also be avoided.

• The maximum calling distance may be shortened when the product is

used in the following places: Near obstacles such as hills, tunnels,

underground, near metal objects such as wire fences, etc.

• Operating the product near electrical appliances may cause

interference. Move away from the electrical appliances.

Routine care

• Wipe the outer surface of the product with a soft moist cloth. Do not use

benzene, thinner, or any abrasive powder.



Preparation

6 Location of controls

Base unit Handset



Attention:

A nickel cadmium battery that is recyclable powers the

product you have purchased. At the end of its useful life,

under various state and local laws, it is illegal to dispose of

this battery into your municipal waste stream. Please call

1-800-8-BATTERY (1-800-822-8837) for information on how

to recycle this battery.

Battery charge

Place the handset on the base unit or charger for about 12 hours before

initial use.

• The CHARGE indicator lights.

• Place each handset on the base unit once before initial use to activate

all handsets.

Base unit Charger (KX-TG2122 only)

• To ensure that the battery charges properly, clean the charge contacts

of the handset, base unit, and charger with a soft, dry cloth once a

month. Clean more often if the unit is subject to the exposure of grease,

dust, or high humidity.

Recharging the battery

Recharge the battery when:

– “RECHARGE” is displayed, “

” is displayed, or

– the handset beeps intermittently while it is in use.

Panasonic battery performance

Operation Operating time

While in use (talking) Up to 5 hours

While not in use (standby) Up to 5 days

Note:

• Battery operating time may be shortened over time depending on usage

conditions and surrounding temperature.

• Battery power is consumed whenever the handset is off the base unit or

charger, even when the handset is not in use. Hence the longer you leave

the handset off the base unit or charger, the less time you may actually

talk using the handset.

• If the battery is fully charged, you do not have to place the handset on

the base unit or charger until “RECHARGE” and/or “

”are

displayed. This will maximize the battery life.

9 Programmable settings

You can customize the unit by programming the following features using

the handset.

Display language

You can select English, Spanish, or French as the display language.

The default setting is “ENGLISH”.

1 Press [FUNCTION] 2 times until “LANGUAGE” is displayed.

2 Select “ENG ESP [ ] [ ]”, “ ”, or “FRA” by using  or .

3 Press [EDIT], then press [OFF].

Area code

We recommend storing your area code before using Caller ID. Calls from the

same area will be recorded in the caller list without the area code. You do not

have to remove it before calling back the caller or storing in the phonebook.

1 Press [FUNCTION] 3 times until “AREA CODE” is displayed.

2 Enter your area code (max. 3 digits).

3 Press [EDIT], then press [OFF].

Ringer tone

You can change the ringer tone heard when an outside call is received. There

are 3 ringer tones. The default setting is “RINGER TONE 1”.

1 Press [FUNCTION] 4 times until “ ” is displayed.RINGER TONE

2 Select the desired ringer tone by using .[ ] or [ ]

3 Press [EDIT], then press [OFF].



Note:

• The following items are retained:

– Redial

– Caller list

– Phonebook items

Making/Answering calls

10 Making calls

1 Lift the handset and dial the phone number.

• To correct a digit, press [CLEAR].

2Press .[ ]

3 When you finish talking, press or place the handset on the base[OFF]

unit or charger.

Note:

• If an alarm tone sounds in step 2, move closer to the base unit or place

the handset on the base unit, and try again.

• If additional dialing is necessary after using speed dialing functions

such as phonebook dialing or REDIAL, wait until speed dialing is

finished to continue further dialing. Otherwise, the unit may not dial

properly.

If noise interferes with the conversation

Press [CH] to select a clearer channel while talking or move closer to the

base unit.

To redial after confirming the last number dialed

Press [REDIAL], then press [ ].

To select the receiver volume

Press or repeatedly while talking.VOL. [ ][ ]

To mute your conversation

Press [MUTE], while talking.

• The other party cannot hear you but you can hear them.

• To return to the conversation, press [MUTE].



Operating Instructions

2.4 GHz Cordless Phone

Model No. KX-TG2120

2.4 GHz Cordless Phone with Two Handsets

Model No. KX-TG2122

Model shown is KX-TG2120.

This unit is compatible with Caller ID. To use this feature, you must

subscribe to the appropriate service offered by your telephone service

provider.

Charge the handset battery for 12 hours before initial use.

Place each handset on the base unit once before initial use to activate all

handsets.

Please read these Operating Instructions before using the unit and save for

future reference.

For assistance, visit our website:

http://www.panasonic.com/phonehelp for customers in the U.S.A. or

Puerto Rico.

If you need assistance with setup or

operation

1 Visit our website: http://www.panasonic.com/phonehelp

2 Contact us via the web at: http://www.panasonic.com/contactinfo

3 Call us at: 1-800-211-PANA (1-800-211-7262) 1-800-833-9626 or

TTY users (hearing or speech impaired users) can call 1-877-833-8855.

When you ship the product

• Carefully pack your unit, preferably in the original carton.

• Attach a letter, detailing the symptom, to the outside of the carton.

• Send the unit to Panasonic Services Company Customer Servicenter, prepaid

and adequately insured.

• Do not send your unit to Panasonic Consumer Electronics Company listed below

or to executive or regional sales offices. These locations do not repair consumer

products.

PQQX15577YA

Black

Lead

Red

Lead

2 About these operating instructions

Notable differences between KX-TG2120 and KX-TG2122

These operating instructions can be used for the following models:

KX-TG2120 features 1 handset.

KX-TG2122 features 2 handsets.

Important:

• References in these operating instructions to “a charger” or “another

handset” are for KX-TG2122 users only.

Symbols used in these operating instructions

Symbol Meaning

[ ]: button name The words in the brackets indicate button

Example: names on the handset and base unit.

Unit keys: [ ] , [OFF]

Example: The words in quotations indicate the menu on the

“LANGUAGE” display.

Handset : Press up or down on the handset CID/VOL. button.

[

 ] [

 ]

Note:

• The AC adaptor must remain connected at all times. (It is normal for the

adaptor to feel warm during use.)

• The AC adaptor should be connected to a vertically oriented or

floor-mounted AC outlet.

Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the

weight of the adaptor may cause it to become disconnected.

• The unit will not work during a power failure. We recommend

connecting a corded telephone to the same telephone line or to the

same telephone jack using a Panasonic T-adaptor.

If you subscribe to a DSL service

Please attach a noise filter (contact your DSL

provider) to the telephone line between the base

unit and the telephone line jack in the event of the

following:

– Noise is heard during conversations.

– Caller ID features do not function properly.

8 Setting up the handset

Connecting the charger (KX-TG2122 only)

Battery installation/replacement

Insert the battery plug into the connector as shown in the picture. Then

close the handset cover.

• If the battery replacement is necessary, press the notch of the handset

cover firmly, and slide it. And then, remove the old battery.

Important:

• Use only the rechargeable Panasonic battery.

For assistance, please visit For assistance, please visit http://www.panasonic.com/phonehelp http://www.panasonic.com/phonehelp

Panasonic Consumer Electronics Company,

Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Puerto Rico, Inc.

San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,

Carolina, Puerto Rico 00985

This material is copyrighted by Panasonic Communications Co., Ltd., and may be

reproduced for internal use only. All other reproduction, in whole or in part, is

prohibited without the written consent of Panasonic Communications Co., Ltd.

3 Accessory information

Included accessories

Antenna

Receiver

Display

[CID] [VOL.]

[EDIT]

[TRANSFER]*1

[OFF]

[AUTO] [FUNCTION]

[CH] (Channel)

[MUTE] [CLEAR]

[ ] (TONE)

[ ] (TALK) [FLASH]

[PAUSE] [REDIAL]

Microphone

TONE

7 Setting up the base unit

Connecting the AC adaptor and telephone line cord

• Use only the included Panasonic AC adaptor PQWATG2120M.

Additional/replacement accessories

Accessory item Order number

Rechargeable battery P-P504 or HHR-P501

Headset KX-TCA86, KX-TCA88HA,

KX-TCA91, or KX-TCA92

T-adaptor KX-J66

Sales and support information

• To order additional/replacement accessories, call 1-800-332-5368.

• TTY users (hearing or speech impaired users) can call 1-866-605-1277.

(1) (5)(4)(3)(2)

Charger (KX-TG2122 only)

Noise filter

To single-line

telephone

jack (RJ11C)

To single-line

telephone

jack (RJ11C)

Noise filter

For assistance, please visit http://www.panasonic.com/phonehelp

(120 V AC, 60Hz)

No. Accessory item Order number

(1) AC adaptor PQWATG2120M 1 1

(2) Telephone line cord PQJA10075Z 1 1

(3) Battery P-P504 1 2

(4) Handset cover PQYNTG2120W 1 2

(5) Charger PQWETGA211W - 1

*1 KX-TG2122 only

Antenna

[LOCATOR]

IN USE indicator

CHARGE indicato

CHARGE indicator

Quantity

KX-TG2120W KX-TG2122W

To single-line

telephone jack

(RJ11C)

(120V AC, 60Hz)

Hook

21 Specifications

General

Operating Environment 5 ˚C - 40 ˚C (41 ˚F - 104 ˚F)

Frequency Handset transmit: 911.171 MHz - 913.066 MHz

Base unit transmit: 2480.0 MHz - 2482.9 MHz

Base unit

Dimensions Approx. height 121.8 mm x width 109 mm x depth 106 mm

(4 13/16 inches x 4 9/32 inches x 4 5/32 inches)

Mass (Weight) Approx. 203 (0.45 lb.)g

Power consumption Standby: Approx. 4.0 W

Maximum: Approx. 5.0 W

Base RF Power output 94 dBuV/m (max.)

Power supply AC adaptor (120 V AC, 60 Hz)

Handset

Dimensions Approx. height 220 mm x width 50.6 mm x depth 40.2 mm

(8 21/32 inches x 2 inches x 1 9/16 inches)

Mass (Weight) Approx. 214 g (0.47 lb.) with battery

Handset RF Power output 94 dBuV/m (max.)

Power supply Ni-Cd battery (3.6 V, 600 mAh)

Charger (KX-TG2122 only)

Dimensions Approx. height 70.4 mm x width 83.3 mm x depth 91.4 mm

(2 3/4 inches x 3 9/32 inches x 3 19/32 inches)

Mass (Weight) Approx. 203 (0.45 lb.) with AC adaptorg

Power consumption Standby: Approx. 2.2 W

Maximum: Approx. 3.3 W

Power supply AC adaptor (120 V AC, 60 Hz)

Note:

• Design and specifications are subject to change without notice.

• The illustrations in these instructions may vary slightly from the actual

product.

Viewing the caller list and calling back

1 Press [ ] or [ ] to enter the caller list.

2 Press [ ] [ ] to search from the most recent call, or  to search from the

oldest call.

3Press .[ ]

Note:

• If the caller list is empty, you cannot enter the caller list by pressing [ ] or

[ ].

• Once new calls have been checked, “NEW” is not displayed.

Editing a caller's phone number before calling back

You can edit a phone number in the caller list by removing its area code and/

or the long distance code “1”.

1 Press [ ] or [ ] to enter the caller list.

2 Select the desired item by using [ ] [ ] or .

3 Press repeatedly until the phone number is shown in the desired[EDIT]

format.

(1) Local phone number

Example: 321-5555

(2) Area code - Local phone number

Example: 555-321-5555

(3) 1 - Area code - Local phone number

Example: 1-555-321-5555

4 [ Press .]

Note:

• The number edited in the step 3 is not maintained in the caller list.

Storing caller information into the handset phonebook

1 Press [ ] or [ ] to enter the caller list.

2 Select the desired item by using [ ] [ ] or .

• To edit the number, press repeatedly until the phone number is[EDIT]

shown in the desired format.

3 Press .[FUNCTION]

4 Press a memory station number to .[ 0 ] [ 9 ]

• The memory station number is shown as “01”, and is shown as[ 1 ] [ 0 ]

“10” in the phonebook.

Erasing selected caller information

1 Press [ ] or [ ] to enter the caller list.

2 Select the desired item by using [ ] [ ] or .

3 Press [CLEAR], then press [OFF].

Erasing all caller information

1 Press [ ] or [ ] to enter the caller list.

2 Press and hold until “[CLEAR] CLEAR ALL CID ?” is displayed.

3 Press .[CLEAR]

Phonebook

15 Handset phonebook

You can add up to 10 items to the handset phonebook and search for

phonebook items by name.

Storing names and numbers

1 Press .[FUNCTION]

2 Press a memory station number to .[ 0 ] [ 9 ]

• If an item is already stored, that information is displayed.

• The memory station number is shown as “01”, and is shown as[ 1 ] [ 0 ]

“10” in the phonebook.

3 Press .[EDIT]

4 Enter the name (max. 15 characters), using the dialing buttons to [ 1 ]

[ 9 ], .[ ] or [ ]

• If a name is not required, press and go to step 6.[EDIT]

5 Press .[EDIT]

6 Enter the phone number (max. 24 digits), using the dialing buttons [ 0 ] to

[ 9 ], .[ ] or [ ]

• If a pause is required for dialing, [PAUSE] can be stored in a phone

number counting as one digit.

• When you store the last number dialed, press instead of[REDIAL]

entering a phone number.

7 Press .[EDIT]

 

Character table

• To enter another character that is located on the same dial key, first set

the currently selected character by pressing either , , or .[ * ] [ 0 ] [ # ]

Editing/correcting a mistake

Press [ ] or [ ] to move the cursor to the character or number you want to

erase, then press . Enter the appropriate character or number. Each[CLEAR]

time you press , a character under the cursor is erased.[CLEAR]

• Press and hold to erase all character or numbers.[CLEAR]

Finding and calling a handset phonebook item

1 Press . [FUNCTION]

2 Press or .[ ][ ]

• The first item or last item is displayed.

3 Press to scroll from the memory station “01”, or to scroll from[ ][ ]

memory station “10”.

• You can also find the items using the memory station numbers to[ 0 ]

[ 9 ] directly.

• The memory station number shows “01”, shows “10” on the[ 1 ] [ 0 ]

display.

4Press .[ ]

Note:

• If “ ” is displayed in step 2, the phonebook is empty.EMPTY

• If the phone number is more than 12 digits, the whole number has not

been shown. The remaining numbers are displayed alternately.

Editing items in the handset phonebook

1 Press .[FUNCTION]

2 Select the desired item by using [ ] [ ] or .

• You can also find the items using the memory station numbers to[ 0 ]

[ 9 ] directly.

3 Press .[EDIT]

4 Edit the name using the dial key, [ ] [ or ] (max. 15 characters).

5 Press .[EDIT]

6 Edit the phone number using the dial key, [ ] [ ] or  (max. 24 digits).

7 Press .[EDIT]

Erasing an items in the handset phonebook

1 Press .[FUNCTION]

2 Select the desired item by using [ ] [ ] or .

• You can also find the items using the memory station number to[ 0 ]

[ 9 ] directly.

3 Press .[CLEAR]

Erasing all items in the handset phonebook

1 Press .[FUNCTION]

2 Review phonebook items by using [ ] [ ] or .

3 Press and hold [CLEAR] until “CLEAR ALL ?” is displayed.

4 Press .[CLEAR]

  

• If the unit cannot receive caller information, the following is displayed:

– “OUT OF AREA”: The caller dialed from an area which does not

provide Caller ID service.

– “PRIVATE CALLER”: The caller requested not to send caller

information.

– “LONG DISTANCE”: The caller called you long distance.

– “ERROR”: The Caller ID information is interfered with during reception.

• If the unit is connected to a PBX system, caller information may not be

received properly. Consult your PBX supplier.

• The name display service may not be available in some areas. For further

information, please contact your telephone service provider.

Missed calls

If a call is not answered, the unit treats the call as a missed call.

For example, if 10 calls from different parties are missed, “NEW CALL 10” is

displayed on the handset display. This lets you know if you should view the

caller list to see who called while you were out.

Call Waiting Caller ID display

If you subscribe to both Caller ID and Call Waiting with Caller ID services, the

2nd caller's information is displayed after you hear a Call Waiting tone. Please

contact your telephone service provider for details and availability of this

service in your area.

14 Caller list

What the display means

ROBINSON, TINA

1-555-321-5555

6/10 3:10

CALL

NEW

Name

Phone Number Shows which calls

you have not

checked.

The date and time the

call has been received.

(ex. June 10, 3:10PM)

The number of calls which

you have received.

11 Answering calls

When a call is received, the IN USE indicator on the base unit flash rapidly.

1Lift the handset and press [ ].

• You can also answer the call by pressing any button except [OFF] and

[ # ] .(Any key talk feature)

2 When you finish talking, press or place the handset on the base[OFF]

unit or charger.

Temporary ringer off

While the handset is ringing for an outside call, you can turn the ringer off

temporarily be pressing .[ # ]

12 Call transfer (KX-TG2122 only)

During an outside call, you may transfer the outside call to another

handset.

1 Ex. Handset 1:

Press [TRANSFER] on the originating handset.

• “TRANSFERRING” shows in the display. Both handsets are paged.

2 Ex. Handset 2:

Press or [TRANSFER] [ ] on the receiving handset to answer the

call.

• To cancel the call transfer, you may press , or[OFF] [TRANSFER],

[ ] on the originating handset.

Caller ID service

13 Caller ID service

This unit is Caller ID compatible. To use Caller ID features, you must

subscribe to Caller ID service of your telephone service provider.

Caller ID features

When an outside call is being received, the calling party's name and

telephone number are displayed.

Caller information for the last 40 different callers is logged in the caller list by

the most recent call to the oldest.

• Generally caller information is displayed from the 2nd ring.



For assistance, please visit For assistance, please visit For assistance, please visit http://www.panasonic.com/phonehelp http://www.panasonic.com/phonehelp http://www.panasonic.com/phonehelp

Special features

16 Special features

Automatic security code setting

When you place the handset on the base unit for the first time after

connecting the AC adaptor, the unit automatically selects one of more than

65,000 security codes.

Handset locator

You can locate the handset or page the handset user with beep tones from

the base unit.

1 Base unit:

Press [LOCATOR].

• The IN USE indicator flashes. The handset beeps for 1 minute and

“PAGING” is displayed on the handset.

2 Base unit:

To stop paging, press [LOCATOR] again.

Handset:

To stop paging, press [OFF].

Temporary tone dialing (for rotary/pulse service users)

You can temporarily switch the dialing mode to tone when you need to

access touch tone services (for example, answering services, telephone

banking services, etc.).

Press [ * ] (TONE) before entering access numbers which require tone dialing.

PAUSE button (for PBX/long distance service users)

A pause is sometimes required when making calls using a PBX or long

distance service.

For example, if you need to dial the line access number “9” when making

outside calls with a PBX:

1 Press [ 9 ], then press [PAUSE], then dial the phone number.

2Press . [ ]

Note:

• A 3.5 second pause is inserted each time [PAUSE] is pressed. Press

repeatedly to insert longer pauses.

19 Troubleshooting

General use

Problem Cause/solution

The unit does not work. - Make sure the battery is installed correctly and fully charged.

- Check the connections.

- Unplug the base unit’s AC adaptor to reset the unit. Reconnect

the adaptor and try again.

- Place the handset on the base unit and try again.

I cannot hear a dial tone. - Confirm the telephone line cord is properly connected.

- Disconnect the unit from the telephone line and connect a

known working telephone. If the working telephone

operates properly, contact our service personnel to have the

unit repaired. If the working telephone does not operate

properly, contact your telephone service provider.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Some cordless telephones operate at frequencies that may cause

interference to nearby TVs and VCRs. To minimize or prevent such

interference, the base of the cordless telephone should not be placed near or

on top of a TV or VCR. If interference is experienced, move the cordless

telephone further away from the TV or VCR. This will often reduce, or eliminate,

interference.

20 FCC and other information

This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA. On the bottom of this equipment is a

label that contains, among other information, a product identifier in the

format US:5GG———.

If requested, this number must be provided to the telephone company,

• Registration No.------------------- (found on the bottom of the unit)

• Ringer Equivalence No. (REN) ------------------- 0.0B

A plug and jack used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC Part 68 rules and

requirements adopted by the ACTA. A compliant telephone cord and modular

plug is provided with the product. It is designed to be connected to a

compatible modular jack that is also compliant.

The REN is used to determine the number of devices that may be connected

to a telephone line. Excessive RENs on a telephone line may result in the

devices not ringing in response to an incoming call. In most but not all areas,

the sum of RENs should not exceed five (5.0). To be certain of the number of

devices that may be connected to a line, as determined by the total RENs,

contact the local telephone company. For products approved after July 23,

2001, the REN for the product is part of the product identifier that has the

format US:AAAEQ##TXXXX. The digits represented by ## are the REN

without a decimal point (e.g., 03 is a REN of 0.3).

If this equipment causes harm to the telephone network, the telephone

company will notify you in advance that temporary discontinuance of service

may be required. But if advance notice isn’t practical, the telephone company

will notify the customer as soon as possible. Also, you will be advised of your

right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment,

operations or procedures that could affect the operation of the equipment. If

this happens the telephone company will provide advance notice in order for

you to make necessary modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty information,

please contact a Factory Servicenter or other Authorized Servicer. If the

equipment is causing harm to the telephone network, the telephone

company may request that you disconnect the equipment until the problem is

resolved.

For Call Waiting service users

To use Call Waiting, you must subscribe to Call Waiting service of your

telephone service provider. This feature allows you to receive calls while you

are already talking on the phone. If you receive a call while on the phone, you

will hear a Call Waiting tone. Please contact your telephone service provider

for details and availability of this service in your area.

Press to answer the 2nd call after the tone.[FLASH]

• To switch between calls, press .[FLASH]

Useful information

17 Optional headset

Plugging an optional headset into the handset allows a hands-free phone

conversation.

Connecting an optional headset to the handset

Open the headset jack cover, and connect an optional headset to the

headset jack.

We recommend using the Panasonic headset.

Note:

• When an optional headset is connected to the handset, make sure to

use the headset to talk with the caller. If you want to have a normal

cordless phone conversation, disconnect the headset.

18 Wall mounting (Base unit only)

Connect the telephone line cord. Mount the unit by inserting the mounting

pins into the round openings on the base unit (for pin (B), use round cut out

at the bottom of the base unit if you are using the 4 inches phone plate),

then sliding the unit down to secure it.

Connect the AC adaptor to power outlet.

• There are two common types of wall

phone plates. The distance between

(A) and (B) may vary depending on

the size of the wall phone plate

installed.

Connection to party line service is subject to state tariffs. Contact the state

public utility commission, public service commission or corporation

commission for information.

If your home has specially wired alarm equipment connected to the telephone

line, ensure the installation of this equipment does not disable your alarm

equipment. If you have questions about what will disable alarm equipment,

consult your telephone company or a qualified installer.

This equipment is hearing aid compatible as defined by the FCC in 47 CFR

Section 68.316.

When you hold the phone to your ear, noise might be heard in your

Hearing Aid. Some Hearing Aids are not adequately shielded from external

RF (radio frequency) energy. If noise occurs, use an optional headset

accessory or the speakerphone option (if applicable) when using this

phone. Consult with your audiologist or Hearing Aid manufacturer about the

availability of Hearing Aids which provide adequate shielding to RF energy

commonly emitted by digital devices.

WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING

TEST CALLS TO EMERGENCY NUMBERS:

1) Remain on the line and briefly explain to the dispatcher the reason for

the call.

2) Perform such activities in the off-peak hours, such as early morning or

late evenings.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Privacy of communications may not be ensured when using this phone.

CAUTION:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this

device.

Programmable settings

Problem Cause/solution

While programming, the - A call is being received. Answer the call and start again after

handset starts to ring. hanging up.

Battery recharge

Problem Cause/solution

I fully charged the battery, - Clean the charge contacts and charge again.

but “

” continues to - The battery may need to be replaced with a new one.

display.

The handset display is - Confirm that the battery is properly installed.

blank. - Fully charge the battery.



Making/answering calls, intercom

Problem Cause/solution

Static is heard, sound - Move the handset and base unit away from other

cuts in and out. electrical appliances.

Interference from other - Move closer to the base unit.

electrical units. - Raise the base unit antenna.

- Press [CH] to select a clearer channel in the talk mode.

- If your unit is connected to a telephone line with DSL service,

we recommend connecting a noise filter between the base unit

and the telephone line jack. Contact your DSL provider for details.

The handset does not - The ringer is turned off. Turn it on.

ring.

For assistance, please visit http://www.panasonic.com/phonehelp

I cannot make a call. - The dialing mode may be set incorrectly. Change the setting.

- Another handset is in use. Try again later.

I cannot redial by - If the last number dialed was more than 24 digits long, the

pressing [REDIAL]. number will not be redialed correctly. Dial the number manually.

I cannot have a - Make sure that an optional headset is connected properly.

conversation using the

headset.

I cannot make long - Make sure that you have long distance service.

distance calls.

I cannot page the - The called handset is too far from the base unit.

handset. - The called handset is in use. Try again later.

Caller ID

Problem Cause/solution

The handset does not - You have not subscribed to Caller ID service. Contact your

display the caller’s telephone service provider to subscribe.

name and/or phone - If your unit is connected to any additional telephone equipment

number. such as a Caller ID box or cordless telephone jack, disconnect

the unit from the equipment and plug the unit directly into the

wall jack.

- If your unit is connected to a telephone line with DSL service,

we recommend connecting a noise filter between the base unit

and the telephone line jack. Contact your DSL provider for details.

- The name display service may not be available in some areas.

Contact your telephone service provider for details.

- Other telephone equipment may be interfering with this unit.

Disconnect the other equipment and try again.

- The caller requested not to send caller information.

- If a call is being transferred to you, the caller information is not

displayed.

- Generally, caller information is displayed from the 2nd ring.

I cannot dial the phone - The phone number you dialed might have an incorrectly edited

number edited in the pattern (for example, the long distance “1” or the area code

caller list. is missing). Edit the phone number with another pattern.

The 2nd caller’s - In order to use Caller ID, Call Waiting, or Call Waiting Caller ID

information is not (CWID), you must first contact your telephone service provider

displayed during an and subscribe to the desired service. After subscribing, you may

outside call. need to contact your telephone service provider again to activate

this specific service, even if you already subscribed to both

Caller ID and Call Waiting with Caller ID services (CWID).

(A)

(B)

83mm

(3 1/4 inches)

102mm

(4 inches)

83mm

(3 1/4 inches)

102mm

(4 inches)

(A)

(B)

Shows which calls you

have not checked.

The number of calls which

you have received.

The date and time the

latest call has been

received. (ex. June 10,

3:10PM)

Name

Phone Number

Key Character

[1] Space - * !

[2] A B C (

[3] D E F )

[4] G H I "

[5] J K L '

[6] M N O ;

[7] P Q R S

[8] T U V ?

[9] W X Y Z

[] To move the cursor to the left

[] To move the cursor to the right

Product specificaties

Merk:	Panasonic
Categorie:	Telefoon
Model:	KX-TG2120

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic KX-TG2120 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Telefoon Panasonic

Panasonic KX-TGC252 Handleiding

23 November 2024

Panasonic VE-GE10DW Handleiding

23 November 2024

Panasonic KX-TG6861 Handleiding

19 Augustus 2024

Panasonic KX-F3000 Handleiding

7 Augustus 2024

Panasonic KX-TGUA10 Handleiding

30 Juli 2024

Panasonic KX-TGJ422 Handleiding

27 Februari 2024

Panasonic KX-TGUA40 Handleiding

26 Februari 2024

Panasonic KX-TGA721EX Handleiding

4 Februari 2024

Panasonic KX-TGC312 Handleiding

16 November 2023

Panasonic KX-TG3721 Handleiding

16 November 2023

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon

Ranex RX 6031 Handleiding

30 November 2024

HTC Desire 19+ Handleiding

30 November 2024

Philips D260 Handleiding

24 November 2024

Huawei P60 Handleiding

23 November 2024

EMeet OfficeCore M2 Handleiding

19 November 2024

Geemarc Serenties Handleiding

17 November 2024

Auerswald COMpact 4000 Handleiding

17 November 2024

Auerswald COMfortel 1200 Handleiding

17 November 2024

Akuvox MD12 Handleiding

17 November 2024

MyPhone Metro+ Handleiding

16 November 2024