Panasonic KX-HN6031 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic KX-HN6031 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Installation Guide
Home Network System
Smart Plug
Model No. KX-HNA101E
Thank you for purchasing a Panasonic product.
This document explains how to install the smart plug properly.
For details about how to use the system, refer to the User’s Guide
(page 12).
Please read this document before using the unit and save it for future
reference.
For dedicated help, support, or advice, available to help you Monday -
Friday, 09:00 - 23:00. For U.K., please contact us on 0330 3331112 and
for Ireland 01 4475228.
HNA101E_(en_en)_1228_ver.204.pdf 1 2016/12/28 11:27:15
About this system
RThis system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
RThe system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
RUse only the power source marked
on the product.
RDo not overload power outlets. This
can result in the risk of fire or electric
shock.
RCompletely insert the product into
the power outlet. Failure to do so
may cause electric shock and/or
excessive heat resulting in a fire.
RRegularly remove any dust, etc.
from the product by pulling it from
the power outlet, then wiping with a
dry cloth. Accumulated dust may
cause an insulation defect from
moisture, etc. resulting in a fire.
RUnplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These conditions can
cause fire or electric shock. Confirm
that smoke has stopped emitting
and contact an authorised service
centre.
RUnplug from power outlets and
never touch the inside of the product
if its casing has been broken open.
Danger of electric shock exists.
RNever touch the plug with wet
hands. Danger of electric shock
exists.
RDo not connect non-specified
devices.
RBefore connecting an electric device
to this product, make sure the
electric device meets the
specifications described on
page 13. Using unspecified
devices may cause fire or smoke.
Installation
RInstall this product in accordance
with the provided instructions.
RTo prevent the risk of fire or
electrical shock, do not expose the
product to rain or any type of
moisture.
RDo not place or use this product
near automatically controlled
devices such as automatic doors
and fire alarms. Radio waves
emitted from this product may cause
such devices to malfunction
resulting in an accident.
RPanasonic will not be held
responsible for damage or injury
caused by improper connection,
installation, or usage.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228 5
Important Information
HNA101E_(en_en)_1228_ver.204.pdf 5 2016/12/28 11:27:16
Part names and
functions
B
C
D
A
Power plug
M
M
M
MM N
N
N
NN
Used when registering the smart
plug to the hub.
Power outlet
M
M
M
MM N
N
N
NN (on/off)
LED indicator
Turns the connected device on
and off. Also serves as the LED
indicator.
LED indicator
You can use the LED indicator to
confirm the smart plug’s status.
Indicator Status
Off No power, smart
plug is off, or LED
indicator is turned
off*1
Green, lit Smart plug is on*1
Indicator Status
Green,
blinking slowly
Registration mode
Red, blinking Smart plug is out of
range of the hub
Red, blinking
very quickly
Connected electric
device is drawing
too much current or
wattage*2
*1 You can configure the smart plug
so that its LED indicator does not
light during normal operation. For
more information, refer to the
User’s Guide (page 12).
*2 In this case, the smart plug will
turn off automatically. To turn the
smart plug on again, disconnect it
from the power outlet, disconnect
the connected electric device, and
then connect the smart plug to the
power outlet.
Setup overview
1Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2Connection
Connect the smart plug to the
power outlet and connect the
desired electric device to the smart
plug.
3Registration
Required only if the smart plug
was purchased separately (i.e.,
not as part of a bundle).
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228 9
Setup
HNA101E_(en_en)_1228_ver.204.pdf 9 2016/12/28 11:27:16


Product specificaties

Merk: Panasonic
Categorie: Niet gecategoriseerd
Model: KX-HN6031

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic KX-HN6031 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Panasonic

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd