Panasonic EX-14A Handleiding

Panasonic Niet gecategoriseerd EX-14A

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Panasonic EX-14A (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 80 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
INSTRUCTION MANUAL
EX-10 Series
Ultra-slim TypePhotoelectric Sensor
SPECIFICATIONS1
Ο†1mm opaque object
Setting distance between
emitter and receiver: 150mm
Ο†2mm opaque object
Setting distance between
emitter and receiver: 500mm
0.1mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2m long (Note 4)Cable
Red LED (lights up when the output is ON), located on the receiver for the thru-beam type sensorOperation indicator
Green LED (lights up under stable light received condition or stable dark condition),
located on the receiver for the thru-beam type sensor
Stability indicator
15% or less of
operation distance
βˆ’
Hysteresis
0.1mm or less0.05mm or less
Repeatability
(perpendicular to sensing axis)
1m
2 to 25mm (Note 2)
(Conv. point: 10mm)
500mm
Enclosure: Polyethylene terephthalate, Lens: PolyalylateMaterial
Emitter, receiver: 20g approx. each 20g approx.Weight
Mounting screws: 2 sets
Mounting screws: 1 set
Accessories
Red LED (modulated)
0.5ms or lessResponse time
IP67 (IEC)Protection
-25 to +55 (Note 3) (No dew condensation or icing allowed), Storage: -30 to +70℃ ℃Ambient temperature
35 to 85% RH, Storage: 35 to 85% RHAmbient humidity
Emitting element
Incorporated
Output
Short-circuit protection
<EX- A(-R), EX- B(-R)>β–‘ β–‘
NPN open-collector transistor
・Maximum sink current: 50mA
・
Applied voltage: 30V DC or less (between output and 0V)
・Residual voltage: 1V or less (at 50mA sink current)
0.4V or less (at 16mA sink current)
<EX- A-PN, EX- B-PN>β–‘ β–‘
PNP open-collector transistor
・Maximum source current: 50mA
・
Applied voltage: 30V DC or less (between output and +V)
・Residual voltage: 1V or less (at 50mA source current)
0.4V or less (at 16mA source current)
Current consumption
12 to 24V DC 10% Ripple P-P 10% or lessΒ±
Emitter: 10mA or less, Receiver: 15mA or less 20mA or less
Supply voltage
150mmSensing range
Ο†0.1mm copper wire
(Setting distance: 10mm)
Min. sensing object
Front sensing Side sensing Front sensing Front sensing Front sensingSide sensing
EX-11A -PN -R( / )
EX-11EA -PN -R( / )
EX-13A -PN -R EX-19A -PN -R EX-14A -PN -R( / ) ( / ) ( / )
EX-13EA -PN -R( / )
EX-11B -PN -R( / )
EX-11EB -PN -R( / )
EX-13B -PN -R EX-19B -PN -R EX-14B -PN -R( / ) ( / ) ( / )
EX-13EB -PN -R( / )
Thru-beam
Convergent reflective
Type
Model No.
(Note 1)
Dark-ON
Light-ON
Item
Ο†2mm opaque object
Setting distance between
emitter and receiver: 1m
Notes: 1) Model Nos. having the suffix ' ' are PNP output type. -PN
Further, model Nos. having suffix ' ' are inflection resistant -R
cable type. (NPN output type only)
The model No. with suffix ' ' shown on the label affixed to the P
thru-beam type sensor is the emitter, ' ' shown on the label is D
the receiver.
Thru-beam type sensor emitter: , Thru-beam type sen-EX- Pβ–‘
sor receiver: EX- Dβ–‘
Notes: 2)
3)
4)
The sensing range of the convergent reflective type sensor is
specified for white non-glossy paper (50 50mm) as the Γ—
object.
ξ€€-10 to +55 for the inflection resistant cable type.℃
The inflection resistant type has a 0.1mm
2
3-core (thru-beam
type emitter: 2-core) inflection resistant cabtyre cable, 2m long.
CAUTIONS3
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
This product has been developed / produced for industrial use only.
For the convergent reflective type , if there is a EX-14β–‘
reflective object (e.g., a conveyor, etc.) in the background
of the sensing object, since it may affect the sensing, use
by keeping enough distance from the reflective object.
The thin cable (0.1mm2) is used for this product. Thus, take care that
if the cable is pulled with excessive force, it may cause cable break.
Make sure that the power supply is off while wiring.
Take care that wrong wiring will damage the sensor.
Verify that the supply voltage variation is within the rating.
If power is supplied from a commercial switching regula-
tor, ensure that the frame ground (F.G.) terminal of the
power supply is connected to an actual ground.
In case noise generating equipment (switching regulator, inverter
motor, etc.) is used in the vicinity of this product, connect the frame
ground (F.G.) terminal of the equipment to an actual ground.
Do not run the wires together with high-voltage lines or
power lines or put them in the same raceway. This can
cause malfunction due to induction.
Extension up to total 50m, is possible with 0.3mm2, or
more, cable for both, emitter and receiver. However, in or-
der to reduce noise, make the wiring as short as possible.
Do not use during the initial transient time (50ms) after
the power supply is switched on.
Take care that the sensor is not directly exposed to fluorescent
lamp from a rapid-starter lamp, a high frequency lighting device
or sunlight etc., as it may affect the sensing performance.
This sensor is suitable for indoor use only.
Avoid dust, dirt, and steam. Do not use it in places hav-
ing excessive vapor, dust, etc., or where it may come in
contact with corrosive gas.
Take care that the sensor does not come in contact with
water, oil, grease, organic solvents, such as, thinner
etc., or strong acid, and alkaline.
Make sure that stress by forcible bend or pulling is not
applied directly to the sensor cable joint.
Since the cable end is not waterproof, do not use the sensor in
the application where water may seep in from the cable end.
I/O CIRCUIT DIAGRAMS4
Symbols... D
ZD
Tr1
Tr2
: Reverse supply polarity protection diode
: Surge absorption zener diode
: NPN output transistor
: PNP output transistor
Sensor circuit
+
-
12 to 24V DC
Β±10%
D (Brown) +V
(Bla ck
) Out
pu t (Note)
(Blue
) 0V
ZD50mA max.
Tr1
Load
Color code
Internal circuit Users' circuit
●EX- A(-R), EX- B(-R) / NPN output typeβ–‘ β–‘
Note:
The emitter of the thru-beam type sensor does not incorporate the output.
Sensor circuit
+
-
12 to 24V DC
Β±10%
(Brown) +V
(Bla ck
) Out
pu t (Note)
(Blue
) 0V
ZD50mA max.
D
Tr2
Load
Color code
Internal circuit Users' circuit
●EX- A-PN, EX- B-PN / PNP output typeβ–‘ β–‘
Note:
The emitter of the thru-beam type sensor does not incorporate the output.
MOUNTING2
●In case of mounting on tapped holes (Unit: mm)
・The tightening torque should be 0.2N・m or less.
Side sensing Front sensing
11
Attached
screw
[M2 (length 10)]
M2 0.4 holesΓ—
tapped 6 deep
Sensing
direction
11
Attached
screw
[M2 (length 8)]
M2 0.4 holesΓ—
tapped 7 deep
Sensing
direction
Side sensing Front sensing
●
In case of using attached screws and nuts (Unit: mm)
・The tightening torque should be 0.2N・m or less.
11 Spring
washers
Flat washers
Nuts
Attached screw
[M2 (length 10)]
Thickness of mounting plate
2 or less
Thickness of mounting plate
2.5 or less
11
Attached screw
[M2 (length 8)]
Sensing
direction
Sensing
direction
OPTIONAL SENSOR MOUNTING BRACKET
5
●
●
When mounting the sensor with the optional sensor
mounting bracket, use the attached M2 screws and
the tightening torque should be 0.2N・m or less.
Six types of optional sensor mounting brackets are available.
MS-EX10-11
MS-EX10-3
MS-EX10-13
MS-EX10-12
MS-EX10-2
MS-EX10-1
Model No. Description
Mounting bracket for front sensing type only Two
M2 (length 4mm) pan head screws are attached.
Mounting bracket for side sensing type only Two
M2 (length 8mm) pan head screws are attached.
L-shaped mounting bracket
Two M2 (length 4mm) pan head screws, and two
M2 (length 8mm) pan head screws are attached.
Mounting bracket for front sensing type only
Two M2 (length 4mm) pan head
screws (stainless steel) are attached.
Mounting bracket for side sensing type only
Two M2 (length 8mm) pan head
screws (stainless steel) are attached.
L-shaped mounting bracket
Two M2 (length 4mm) pan head screws (stain-
less steel), and two M2 (length 8mm) pan
head screws (stainless steel) are attached.
Material
Stainless
steel
(SUS304)
Cold rolled
carbon steel
(SPCC)
OPTIONAL SLIT MASK
(EX-13 and EX-19 only)β–‘ β–‘
6
●
Apply a slit mask when detecting small objects or for in-
creasing the accuracy of sensing position. However, the
sensing range is reduced when the slit mask is mounted.
●
●
The slit mask should be mounted on the sensor be-
fore mounting the sensor.
If the front sensing type sensor is used along with the
slit mask and the optional sensor mounting bracket
for the front sensing type, or MS-EX10-1 MS-EX10-
11, as shown in the figure below, a 0.2mm, or more,
thick spacer is separately required.
Slit mask for front sensing type only
(hole diameter: 1.5mm)Ο†
Slit mask for side sensing type only
(hole diameter: 1.2mm)Ο†
OS-EX10-12
OS-EX10E-12
(Note)
OS-EX10-15
Slit mask for front sensing type only
(hole diameter: 1.2mm)Ο†
Stainless
steel
(SUS304)
Model No. Description Material
Note: Excluding .EX-19β–‘
M3 screws
0.2mm, or more, thick spacer
is separately required.
Thank you very much for using SUNX products. Please
read this Instruction Manual carefully and thoroughly for the
correct and optimum use of this product. Kindly keep this
manual in a convenient place for quick reference.
WARNING
●
●
Never use this product as a sensing device for personnel protection.
In case of using sensing devices for personnel protection, use prod-
ucts which meet laws and standards, such as OSHA, ANSI or IEC
etc., for personnel protection applicable in each region or country.
INTENDED PRODUCTS FOR
CE MARKING
7
●
The models listed under ' ' SPECIFICATIONS
come with CE Marking.
As for all other models, please contact our office.
1
PRINTED IN JAPAN
Overseas Sales Dept. (Head Office)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Phone: +81-(0)568-33-7861 FAX: +81-(0)568-33-8591
Europe Headquarter: Panasonic Electric Works Europe AG
Rudolf-Diesel-Ring 2, D-83607 Holzkirchen, Germany
Phone: +49-8024-648-0
US Headquarter: Panasonic Electric Works Corporation of America
629 Central Avenue New Providence, New Jersey 07974 USA
Phone: +1-908-464-3550
URL : sunx.jp
SUNX Limited

Product specificaties

Merk: Panasonic
Categorie: Niet gecategoriseerd
Model: EX-14A

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic EX-14A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Panasonic

Panasonic

Panasonic MultiShape ER-CKN3 Handleiding

25 November 2024
Panasonic

Panasonic NB-W250 Handleiding

25 November 2024
Panasonic

Panasonic SC-XH100 Handleiding

24 November 2024
Panasonic

Panasonic DMW-AVC1 Handleiding

24 November 2024
Panasonic

Panasonic DMW-GMC1 Handleiding

24 November 2024
Panasonic

Panasonic DMW-LMCH62E Handleiding

23 November 2024
Panasonic

Panasonic AK-HCU250PSJ Handleiding

20 November 2024
Panasonic

Panasonic AW-PS551PJ Handleiding

7 November 2024
Panasonic

Panasonic ER-CFC1 Handleiding

26 September 2024
Panasonic

Panasonic DMW-XLR2 Handleiding

7 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Kolcraft

Kolcraft MLB Chicago Cubs Handleiding

26 November 2024
Kolcraft

Kolcraft MLB New York Yankees Handleiding

26 November 2024
Kolcraft

Kolcraft MLB San Francisco Giants Handleiding

26 November 2024
Kolcraft

Kolcraft MLB St. Louis Cardinals Handleiding

26 November 2024
Nedis

Nedis POCO106 Handleiding

26 November 2024
Nedis

Nedis BTSM1GY Handleiding

26 November 2024
Turbosound

Turbosound TPOLEAJ-01 Handleiding

26 November 2024
Turbosound

Turbosound TSTAND-01 Handleiding

26 November 2024
IFM

IFM TAD981 Handleiding

26 November 2024
IFM

IFM TAD961 Handleiding

26 November 2024