Panasonic DMPBDT165GC Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic DMPBDT165GC (2 pagina's) in de categorie Blu-Ray Disc Player. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
A more detailed operating instructions is available in “Operating Instructions (PDF format)”. To read it,
download it from the website.
http://av.jpn.support.panasonic.com/support/global/cs/bd/oi/index.html
You will need Adobe Reader to browse or print the Operating instructions (PDF format).
You can download and install a version of Adobe Reader that you can use with your OS from the following
website. (As of December 2014)
http://www.adobe.com/products/acrobat/readstep2.html
Check the supplied accessories before using this unit.
1 Remote control
[BDT270]
[For_the_United_Kingdom_and_Ireland]
(N2QAYB001031)
[For_the_Middle_East]
(N2QAYB000959)
[BDT170]
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
(N2QAYB001030)
[For_the_South_East_Asia]
(N2QAYB001033)
[BDT166/165] [BD83]
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
(N2QAYB001029)
[For_the_Middle_East_and_South_East_Asia]
(N2QAYB000958)
[BD73]
[For_the_Middle_East]
(N2QAYB000987)
2 Batteries for remote control
AC mains lead
[BDT270] [BDT170]
[For_the_United_Kingdom_and_Ireland]
(K2CT2CA00007)
[For_Australia_and_New_Zealand]
(K2CJ2DA00014)
[BDT270] [BDT170] [BDT165] [BD73]
[For_the_Middle_East_and_South_East_Asia]*
When other Panasonic devices respond to the remote control of the unit, change the remote control code.
Basic Operating Instructions
Blu-ray DiscTM Player
Model No. DMP-BDT270
DMP-BDT170
DMP-BDT166
DMP-BDT165
DMP-BD83
DMP-BD73
Firmware updates
Panasonic is constantly improving the unit’s firmware
to ensure that our customers are enjoying the latest
technology.
Panasonic recommends updating your firmware as
soon as you are notified.
For details, refer to the back side of this leaflet.
EB GN GA GC GJ
Unless otherwise indicated, illustrations in these
operating instructions are of DMP-BDT270.
SQT0703-2
F1214WY2045
Model number suffix “EB” denotes UK model.
Accessories
[BDT166/165] [BD83] [BD73]
1 AC adaptor
[For_the_United_Kingdom_and_Ireland]
(SAE0003)
[For_Australia_and_New_Zealand]
(SAE0004)
[For_the_South_East_Asia]
(SAE0002)
[For_the_Middle_East_and_Thailand]*
[Except_the_United_Kingdom_and_Ireland]
[Except_BD73]
1 HDMI Cable
Product numbers are provided in these operating instructions
correct as of December 2014. These may be subject to change.
Do not use AC mains lead and AC adaptor with other
equipment.
Do not use any other AC mains lead and AC adaptors except
the supplied one.
* See “STEP 1: Connecting to a TV” for more information.
Using the remote control
Insert the batteries to the terminal so that it (i and j)
matches those in the remote control.
R6/LR6, A
A
(Alkaline or manganese
batteries)
Control reference guide
abc
jkl
mno
pqrs tuv
wxyz
ㄅㄆㄇ
ㄈㄉㄊ
1
2
3
6
4
5
7
8
19
10
920
18
16
15
17
14
13
12
11
abc
jkl
mno
pqrs tuv
wxyz
ㄅㄆㄇ
ㄈㄉㄊ
1
2
3
6
4
7
8
19
9
10
20
18
16
15
17
14
13
12
11
5
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
[For_the_Middle_East_and_South_East_Asia]
[BDT170]
[BDT166/165]
[BD83]
[BDT170]
[BDT165]
[BD83] [BD73]
[BD73]
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not work
depending on the TV.
[ÍTV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers or
[BDT270] [BDT170] characters
4Cancel
5 Change soundtrack
6 Basic playback control buttons
7[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
Show Pop-up menu
[For_the_Middle_East_and_South_East_Asia]
Show USB Sharing menu
8 Show Top menu
9 Show Option menu
10 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display.
11 Transmit the remote control signal
12 Open or close the disc tray
13 Show the status messages
14 [BDT270]
Show MiracastTM screen
[BDT170] [BDT166/165] [BD83] [BD73]
Switch Secondary Video on/off (Picture-in-picture)
15 [Except_BD73]
Show the Home Screen of Network Service
[BD73]
Show Setup menu
16 Exit the Menu screen
17 [For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
Show Netflix screen
[For_the_Middle_East_and_South_East_Asia]
Show Pop-up menu
18 Show HOME menu
19 [3,4,2,1] :
Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame
20 Return to previous screen
1 Disc tray
2 USB port
3 POWER LED
The LED lights when the unit is turned on, and
flashes when error occurs.
4 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and right
5 Open or close the disc tray
6[BDT270] [BDT170]
Stop
7[BDT270] [BDT170]
Start play
8Standby/on switch (Í/I)
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
This unit consumes a small amount of AC power (> “Specifications”) even when turned off in standby mode.
For the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
[BDT166/165] [BD83] [BD73] The unit is in the standby condition when the AC adaptor is connected. The primary
circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug
(figures A and B). Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
1 2 3 4
875 6
85
12
3
4
[BDT166/165]
[BD83] [BD73]
[BDT270]
[BDT170]
Quick Start Guide
STEP 1 : Connecting to a TV
[BDT270] [BDT165] [BD73] [For_the_Middle_East]
[BDT170] [For_the_South_East_Asia]
2 AC mains leads are supplied.
Use the AC mains lead that matches the socket for the area you live in.
Saudi Arabia: 3-pin AC mains lead
Thailand: With a label
HDMI IN
Caution for AC Mains Lead
Fuse cover
Figure A Figure B
Figure A Figure B Fuse
(5 ampere)
Fuse
(5 ampere)
Following functions may not work depending on the media and contents.
BD-Video: Video
BD-RE: Video, JPEG, MPO*, AAC, ALAC, DSD*,
FLAC, MP3, WAV, WMA
BD-R: Video, MKV, Xvid, AAC, ALAC, DSD*, FLAC,
MP3, WAV, WMA
DVD-Video: Video
DVD-R/DVD-R DL : Video, AVCHD, MKV, Xvid,
JPEG, MPO*, AAC, ALAC, DSD*, FLAC, MP3, WAV,
WMA
DVD-RW/+R/+RW/+R DL : Video, AVCHD
Music CD : Music [CD-DA]
CD-R/CD-RW : MKV, Xvid, JPEG, MPO*, AAC,
ALAC, FLAC, MP3, Music [CD-DA], WAV, WMA
USB devices (up to 4 TB) : MKV, MP4, MPEG2,
Xvid, JPEG, MPO*, AAC, ALAC, DSD*, FLAC, MP3,
WAV, WMA
Region management information
The unit can play back BD-Video/DVD-Video discs of
the following regions codes, including “ALL”:
Example: BD-Video DVD-Video
[For_the_United_Kingdom_and_Ireland] [For_the_Middle_East]
[For_Australia_and_New_Zealand]
[For_the_South_East_Asia]
* [BDT270] [BDT170] [BDT166/165] only
STEP 2 : Connecting to the network
[BDT270]
Wireless LAN connection
Wireless router, etc. Internet
[Except_BD73]
LAN cable connection
Broadband router, etc. Internet
LAN Cable
[BDT270]
[BDT170]
[BDT166/165]
[BD83]
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
STEP 3 : Settings
Turn on the TV and select the appropriate video
input.
Press [Í/I].
Follow the on-screen instructions to continue with
the settings.
21 HDMI HDMI
TV
STEP 4 : Playback
Insert the media. Press [OK] or [3,4,2,1] to select the item.
If there are any other items, repeat this step.
1 2
Operating during playback
Stop Press [STOP].
The stopping point is memorized.
Resume play function
Press [1PLAY] to restart from this point.
The point is cleared if the media is removed.
Pause Press [;PAUSE]. Press [;PAUSE] again or [1PLAY] to restart play.
Search While playing, press [SEARCH6]
or [SEARCH5]. The speed increases up to 5 steps.
Press [1PLAY] to revert to normal playback speed.
Slow motion
While paused, press [SEARCH
5
].
Skip While playing or paused, press
[:] or [9]. Skip to the title, chapter or track.
Playable media
2
4
3
until
2014/12/31
[For_the_Middle_East_and_Thailand]
*[BDT165] [BD83] [BD73] Using supplied AC adaptor
Specifications are subject to change without notice.
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.
Do not place objects filled with liquids, such as vases, on this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified service
personnel.
Do not let metal objects fall inside this unit.
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
Ensure that the power supply voltage corresponds to the voltage
printed on this unit.
Insert the mains plug fully into the socket outlet.
Do not pull, bend, or place heavy items on the lead.
Do not handle the plug with wet hands.
Hold onto the mains plug body when disconnecting the plug.
Do not use a damaged mains plug or socket outlet.
The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from the socket
outlet immediately.
Unit
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Do not place sources of naked flames, such as lighted candles, on
this unit.
This unit may receive radio interference caused by mobile telephones
during use. If such interference occurs, please increase separation
between this unit and the mobile telephone.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
Do not place the unit on amplifiers/receivers or equipment that may
become hot. The heat can damage the unit.
Do not expose this unit to direct sunlight, high temperatures, high
humidity, and excessive vibration.
Batteries
Mishandling of batteries can cause electrolyte leakage and may cause a
fire.
Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
When disposing of the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
Do not mix old and new batteries or different types at the same time.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
Do not take apart or short circuit.
Do not recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for a
long period of time. Store in a cool, dark place.
[BDT166/165] [BD83] [BD73]
AC adaptor
The AC adaptor operates on AC between 110 V and 240 V.
But obtain a suitable plug adaptor if the plug does not fit the
AC mains socket.
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
[Except_BD73]
This unit is capable of checking the firmware
automatically when connected to the Internet via a
broadband connection.
When a new firmware version is available, the
following message is displayed.
You can also download the latest firmware from the
following website and store it to a USB device to
update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, unit will restart and
the following screen will be displayed.
e.g.,
To show the firmware version on this unit;
[Except_BD73]
[HOME] > “Setup” > “Player Settings” > “System” >
“System Information” > “Firmware Version Information”
[BD73] [SETTINGS] > “System” > “System Information”
> “Firmware Version Information”
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
[Except_BD73] If you do not want to check for the latest
firmware version, set “Automatic Update Check” to “Off”.
[HOME] > “Setup” > “Player Settings” > “System” >
“Firmware Update”
Firmware Update
Current Version: X.XX
New Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.jp/support/global/cs/
Yes No
OK
RETURN
The firmware has been updated.
Current Version:
x.xx
RETURN
Specifications
Power supply [BDT270] [BDT170]
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
AC 220 to 240 V, 50 Hz
[For_the_Middle_East_and_South_East_Asia]
AC 220 to 240 V, 50 Hz/60 Hz
[BDT166/165] [BD83] [BD73]
DC 12 V 0.8 A (DC IN terminal)
Power
consumption*
[BDT270] [BDT170] Approx. 13 W
[BDT166/165] [BD83] Approx. 11 W
[BD73] Approx. 10 W
Power consumption
in standby mode*
Approx. 0.5 W
(Quick Start: Off)
[For_the_United_Kingdom
_and_Ireland]
Power consumption
in Network standby
mode
[BDT270] [BDT170]
Approx. 5.5 W
[BDT166/165] [BD83]
Approx. 3.5 W
(Quick Start: On)
[For_Australia_and_New
_Zealand]
[For_the_Middle_East_and
_South_East_Asia]
Power consumption
in quick start standy
mode*
[BDT270] [BDT170]
Approx. 5.5 W
[BDT165] [BD83] [BD73]
Approx. 3.5 W
Dimensions
(WkHkD)
[BDT270] [BDT170]
312 mmk43 mmk180 mm
[BDT166/165] [BD83] [BD73]
245 mmk38.5 mmk175 mm
Mass [BDT270] [BDT170]
Approx. 1.0 kg
[BDT166/165] [BD83] [BD73]
Approx. 0.8 kg
Precautions
WARNING
CAUTION
[For_the_United_Kingdom,_Ireland,_Australia_and_New_Zealand]
This unit is intended for use in moderate climates.
[For_the_Middle_East_and_South_East_Asia]
This unit is intended for use in tropical climates.
[BDT270]
Wireless LAN connection
The following limits are in place regarding the usage of this unit. You
must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any condition
of use or disuse of this unit.
Data transmitted and received over radio waves may be
intercepted and monitored.
This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and follow
the following points:
Do not expose this unit to high temperatures or direct sunlight.
Do not bend, or subject this unit to strong impacts.
Keep this unit away from moisture.
Do not disassemble or alter this unit in any way.
[For_the_United_Kingdom_and_Ireland]
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation
declares that this product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE
products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germany
This product is intended for general consumer. (Category 3)
This product on purpose to connect to access point of 2.4 GHz
WLAN.
[For_UAE]
[For_QATAR]
UAE-TRA
DA0052708/10
DEALER No:
ER36990/15
REGISTERED No:
ictQATAR
Type Approval reg. No.:
CRA/SA/2015/R-4570
Importer No:
4299
1Turn the unit on.
2Press and hold [OK], the yellow button and the blue button on the
remote control at the same time for more than 5 seconds.
POWER LED starts to flash, and “00 RET” is displayed on the
screen.
3Press [1] (right) repeatedly on the remote control until “08 FIN” is
displayed on the screen.
4Press and hold [OK] for more than 5 seconds.
The operation history may be recorded in the memory of this unit.
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries must not be mixed with
general household waste.
For proper treatment, recovery and recycling of old products
and used batteries, please take them to applicable
collection points in accordance with your national
legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling, please
contact your local municipality.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
Note for the battery symbol (bottom
symbol):
This symbol might be used in combination with a chemical
symbol. In this case it complies with the requirement set by
the Directive for the chemical involved.
To dispose or transfer this unit
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the procedure
to return all the settings to the factory presets to delete the user
settings.
(Inside of product)
[BDT270] [BDT170]
[BDT166/165] [BD83] [BD73]
(Back of product)
Copyrights and Trademarks
This product uses Cinavia technology to limit the use of unauthorized
copies of some commercially-produced film and videos and their
soundtracks. For details, refer to the operating instructions (PDF
format).
“AVCHD” is a trademark of Panasonic Corporation and Sony
Corporation.
Java is a registered trademark of Oracle and/or its affiliates.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS
and the Symbol together are registered trademarks, and DTS-HD
Master Audio is a trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
This product is licensed under the AVC patent portfolio license and VC-
1 patent portfolio license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC Standard and
VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video
that was encoded by a consumer engaged in a personal and non-
commercial activity and/or was obtained from a video provider licensed
to provide AVC/VC-1 Video. No license is granted or shall be implied for
any other use. Additional information may be obtained from MPEG LA,
LLC.
See http://www.mpegla.com.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
The Wi-Fi CERTIFIEDTM Logo is a certification mark of Wi-Fi Alliance®.
The Wi-Fi Protected SetupTM Identifier mark is a certification mark of
Wi-Fi Alliance®.
“Wi-Fi®” and “Wi-Fi Direct®” are registered trademarks of Wi-Fi
Alliance®.
“Wi-Fi Protected SetupTM”, “MiracastTM”, “WPATM”, and “WPA2TM” are
trademarks of Wi-Fi Alliance®.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
Android is a trademark of Google Inc.
Copyright 2004-2014 Verance Corporation. CinaviaTM is a Verance
Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance
Corporation. All rights reserved.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under the
GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it
will be useful, but WITHOUT ANY WARRANTY, without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. Please refer to the detailed terms and
conditions thereof shown in the Player Settings menu.
At least three (3) years from delivery of this product, Panasonic will give
to any third party who contacts us at the contact information provided
below, for a charge no more than our cost of physically performing
source code distribution, a complete machine-readable copy of the
corresponding source code covered under GPL V2.0, LGPL V2.1 or the
other licenses with the obligation to do so, as well as the respective
copyright notice thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
The source code and the copyright notice are also available for free in
our website below.
http://panasonic.net/avc/oss/
David M. Gay’s dtoa and strtod license
The author of this software is David M. Gay.
Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
Permission to use, copy, modify, and distribute this software for any
purpose without fee is hereby granted, provided that this entire notice is
included in all copies of any software which is or includes a copy or
modification of this software and in all copies of the supporting
documentation for such software.
THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY
EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR, NEITHER
THE AUTHOR NOR LUCENT MAKES ANY REPRESENTATION OR
WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE.
“UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND
SOFTWARE
Unicode Data Files include all data files under the directories
http://www.unicode.org/Public/, http://www.unicode.org/reports/,
and http://www.unicode.org/cldr/data/.
Unicode Software includes any source code published in the Unicode
Standard or under the directories
http://www.unicode.org/Public/,
http://www.unicode.org/reports/, and
http://www.unicode.org/cldr/data/.
NOTICE TO USER: Carefully read the following legal agreement. BY
DOWNLOADING, INSTALLING, COPYING OR OTHERWISE USING
UNICODE INC.’S DATA FILES (““DATA FILES””), AND/OR
SOFTWARE (““SOFTWARE””), YOU UNEQUIVOCALLY ACCEPT,
AND AGREE TO BE BOUND BY, ALL OF THE TERMS AND
CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE, DO
NOT DOWNLOAD, INSTALL, COPY, DISTRIBUTE OR USE THE
DATA FILES OR SOFTWARE.
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1991-2009 Unicode, Inc. All rights reserved. Distributed
under the Terms of Use in
http://www.unicode.org/copyright.html.
Permission is hereby granted, free of charge, to any person obtaining a
copy of the Unicode data files and any associated documentation (the
““Data Files””) or Unicode software and any associated documentation
(the ““Software””) to deal in the Data Files or Software without
restriction, including without limitation the rights to use, copy, modify,
merge, publish, distribute, and/or sell copies of the Data Files or
Software, and to permit persons to whom the Data Files or Software are
furnished to do so, provided that (a) the above copyright notice(s) and
this permission notice appear with all copies of the Data Files or
Software, (b) both the above copyright notice(s) and this permission
notice appear in associated documentation, and (c) there is clear notice
in each modified Data File or in the Software as well as in the
documentation associated with the Data File(s) or Software that the
data or software has been modified.
THE DATA FILES AND SOFTWARE ARE PROVIDED ““AS IS””,
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT
SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN
THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA
FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or other
dealings in these Data Files or Software without prior written
authorization of the copyright holder.”
(1) MS/WMA
This product is protected by certain intellectual property rights of
Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary and third parties.
[Except_BD73]
(2) MS/PlayReady/Final Product Labeling
This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
[Except_BD73]
(3) MS/PlayReady/End User Notices
Content owners use Microsoft PlayReady™ content access technology
to protect their intellectual property, including copyrighted content. This
device uses PlayReady technology to access PlayReady-protected
content and/or WMDRM-protected content. If the device fails to
properly enforce restrictions on content usage, content owners may
require Microsoft to revoke the device’s ability to consume PlayReady-
protected content. Revocation should not affect unprotected content or
content protected by other content access technologies. Content
owners may require you to upgrade PlayReady to access their content.
If you decline an upgrade, you will not be able to access content that
requires the upgrade.
(4) FLAC, WPA Supplicant
The software licenses are displayed when “Software Licence” in the
Setup menu is selected.*
*[Except_BD73]
[HOME] > “Setup” > “Player Settings” > “System” > “System
Information”
[BD73]
[SETTINGS] > “System” > “System Information”
Limited Warranty (ONLY FOR AUSTRALIA)
Panasonic Warranty
1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its
Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of
Panasonic, the product is found to be faulty within the warranty period.
2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised
Distributors or Dealers and only where the products are used and serviced within Australia or it's territories. Warranty cover only
applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when
warranty service is requested.
3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as
noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal
domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation,
accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm
activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations),
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the
product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product.
5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover
6. To claim warranty service, when required, you should:
7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or
re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other
ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and
do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation,
de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however,
coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone
our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the
Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have
the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are
also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a
major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by
contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair
or replace the product and will do so in a reasonable period of time from receiving notice from you.
If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia
website www.panasonic.com.au or contact by phone on 132 600
If phoning in, please ensure you have your operating instructions available.
(a) Internet and or DLNA connection / setup related problems
(b) Access fees and or charges incurred for internet connection
(c) The use of incompatible software or software not specifically stipulated in the product operations manual;
and
(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or
any other device.
4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Cabinet Part(s) (e) DVD, Blu-ray or Recordable Discs
(b) Video or Audio Tapes (f) Video / Audio Heads from wear and tear in normal use
(c) SD cards or USB devices (g) Information stored on Hard Disk Drive, USB stick or SD card
(d) User replaceable Batteries (h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s)
etc
Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre
Locator for the name/address of the nearest Authorised Service Centre.
Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of
purchase date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged
by you.
Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the
normal operating areas of the nearest Authorised Service Centres:
Plasma/LCD televisions / displays (screen size greater than 103 cm)
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
PRO-031-F11 Issue: 4.0 01-01-2011
[For_the_United_Kingdom_and_Ireland_customers]
Sales and Support Information
Customer Communications Centre
For customers within the UK: 0344 844 3899
For customers within Ireland: 01 289 8333
Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).
For further support on your product, please visit our website:
www.panasonic.co.uk
Direct Sales at Panasonic UK
Order accessory and consumable items for your product with ease and confidence by phoning our
Customer Communications Centre Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).
Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
Most major credit and debit cards accepted.
All enquiries transactions and distribution facilities are provided directly by Panasonic UK.
It couldn’t be simpler!
Also available through our Internet is direct shopping for a wide range of finished products. Take a browse
on our website for further details.
EU
Manufactured by:
Importer for Europe:
Panasonic Corporation
Kadoma, Osaka, Japan
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Panasonic Corporation
Web Site: http://panasonic.net
C Panasonic Corporation 2014
p


Product specificaties

Merk: Panasonic
Categorie: Blu-Ray Disc Player
Model: DMPBDT165GC

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic DMPBDT165GC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden