PAC LocPro Advanced LPA1.2 Handleiding

PAC Audio/video-converter LocPro Advanced LPA1.2

Lees hieronder de 📖 handleiding in het Nederlandse voor PAC LocPro Advanced LPA1.2 (8 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
C
Rev.7
1/5/2022
LPH Harness Instruction Guide
®
Wiring Connection Chart (All Models)
MODELS:
• LPA-E4
• LPA2.4 / LPA2.2
• LPA1.4 / LPA1.2
Important Note: This harness is provided
with a inline fuse installed. Please remove
prior to install and reinsert once îš¿nished.
If your vehicle does not provide ACC
source your harness will not have a
"RED" wire to connect.
It will use DC O󰀨set to turn on as well
as trigger the "REM OUT" on the LPA.
On LPA-E4 there will be a jumper that
you can move based on your application.
This harness is designed to work on
OEM NON-AMPLIFIED systems.
Connect the RED BUTT Connector to
the aftermarket system turn on for your
ampliîš¿ers.
Fully open terminals
before inserting wire.
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
C
Rev.7
1/5/2022
LPH Harness Instruction Guide
®
Example Installation - 4-Channel Ampliîš¿er - (HARNESS CUT REQUIRED)
Example Installation - Mono Ampliîš¿er - (HARNESS CUT NOT REQUIRED)
RCA FROM LPA
"CUT HERE
AND INSULATE"
• Cut the harness close as possible to the
"CUT HERE AND INSULATE" label. You
must insulate wires to prevent damage to
OEM radio.
• The cut speaker wires will need to be
connected to your aftermarket ampliîš¿er.
(REFER TO LABEL ON HARNESS)
• Please refer to the chart on the rst page
for wiring your loose wires to your LPA.
• This harness is designed to work on OEM
NON-AMPLIFIED systems.
OEM RADIO HARNESS
LPH TO RADIO CONNECTION
LOOSE WIRES TO LPA
REM OUT FROM LPA
DO NOT CUT!!
• If using a 2-Channel input LPA
use the front speaker wires
and insulate the remaining rear
speaker wires.
• DO NOT CUT the speaker wires
inbetween the "CUT HERE"
Lables in order to keep the
factory speakers functional.
• This harness is designed to
work on OEM NON-AMPLIFIED
systems.
OEM RADIO HARNESS
LOOSE WIRES TO LPA
"CUT HERE AND
INSULATE"
"CUT HERE AND CONNECT TO
AFTERMARKET AMPLIFIER"
LPH TO RADIO CONNECTION
RCA FROM LPA
REM OUT FROM LPA
AFTERMARKET AMPLIFIER
AFTERMARKET AMPLIFIER
"CUT HERE AND CONNECT TO
AFTERMARKET AMPLIFIER"
(CUT SPEAKER WIRES)
©2018 AAMP Global • All Rights Reserved.
ANC vs Amplifier
ANC Module
Amplifier
Actually silver in the vehicle Actually black in the vehicle

Product specificaties

Merk: PAC
Categorie: Audio/video-converter
Model: LocPro Advanced LPA1.2

Heb je hulp nodig?

Als je hulp nodig hebt met PAC LocPro Advanced LPA1.2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Audio/video-converter PAC

PAC

PAC LocPro Advanced LPA-2.2 Handleiding

14 Juni 2023
PAC

PAC LocPro Advanced LPA-E.4 Handleiding

1 Juni 2023
PAC

PAC LocPro Advanced LPA1.2 Handleiding

24 Mei 2023
PAC

PAC LocPro Advanced LPA1.4 Handleiding

16 Mei 2023
PAC

PAC LocPro Advanced LPA-2.4 Handleiding

12 Mei 2023

Handleiding Audio/video-converter

Nieuwste handleidingen voor Audio/video-converter

Smart-AVI

Smart-AVI V2V-C2H-01 Handleiding

21 December 2024
Smart-AVI

Smart-AVI V2V-H2V-01 Handleiding

21 December 2024
Smart-AVI

Smart-AVI V2V-AV2HV Handleiding

21 December 2024
Smart-AVI

Smart-AVI V2V-MAX 3 Handleiding

21 December 2024
Thor

Thor F-M1SDI-3G-TX/RX Handleiding

10 December 2024
Thor

Thor F-M1SDI-TX/RX Handleiding

10 December 2024
Ocean Matrix

Ocean Matrix OMX-HDMI-2-IP Handleiding

10 December 2024
Ocean Matrix

Ocean Matrix OMX-HDMI-2-IP-T Handleiding

10 December 2024
Decimator

Decimator DMON-4S Handleiding

10 December 2024
Decimator

Decimator MD-HX Handleiding

10 December 2024