Ozito ZLGGS-012 Handleiding
Ozito
Lijmpistolen
ZLGGS-012
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ZLGGS-012 (6 pagina's) in de categorie Lijmpistolen. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
CORDLESS
GLUE GUN
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 12V
Glue Stick Size Ø7.2 x 190mm
Heating Time: 10 sec
Max Heating Temp: 170°C
Weight: 0.24kg
ZLGGS-012
WHAT’S IN THE BOX
Cordless Glue Gun
ozito.com.au
3 x Glue Stick
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: accessories etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
1017
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. FITTING THE BATTERY
KNOW YOUR PRODUCT SETUP & PREPARATION
CORDLESS GLUE GUN
8 Glue Stick x 3 ( Ø7.2mm x 190mm )
ACCESSORIES
This tool is compatible with all batteries and chargers from the
Ozito Home-12volt range.
BATTERY & CHARGER
1 Protective Nozzle Cover
2 Trigger Flow Control
3 On / Off Button
4 Glue Display
5 Battery Seating
6 Glue Stick Entry
7 LED Indicator Lights
1 2 3 4 5 6 7
8
Installing the Battery Pack
1. Slide the battery into the Glue Gun base until it clicks into place.
Removing the Battery Pack
1. Hold down the battery release button and
then slide the battery out.
2. LOADING THE GLUE STICK 3. SWITCHING THE GLUE GUN ON
OPERATION
Switching the Glue Gun On
Switching the Glue Gun Off
Installing the Glue Stick
2 Squeeze the trigger ow
control multiple times to allow
the glue stick to be pushed
down.
1 Insert the glue
stick into the glue
stick entry and
slide down gently.
2 The rst indicator
light will glow red
to indicate the
glue gun is on.
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
ALLOWED TO COOL DOWN BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
WARNING! THE GLUE GUN NOZZLE AND HEATED GLUE
GUN BECOME HOT WHILE IN USE. IN THE EVENT OF
ACCIDENTAL SKIN CONTACT WITH HOT GLUE, RUN
UNDER COLD WATER IMMEDIATELY.
CAUTION! THE PROTECTIVE NOZZLE WILL REMAIN HOT
FOR A FEW MINUTES. DO NOT STORE THE GLUE GUN
DIRECTLY AFTER USE. ALLOW THE NOZZLE TO COOL
AND THE GLUE TO SOLIDIFY.
1 Hold the on/off switch down
for roughly 3 seconds to start
the glue gun.
Note: A LED light will illuminate
when switched on.
1 Press the on/off switch to
switch off. All LED lights will
turn off.
Note: Allow the glue gun to heat up before you start operating.
3 The second
indicator light will
then glow green
after 10 seconds
indicating the glue
gun is ready to
use.
Product specificaties
| Merk: | Ozito |
| Categorie: | Lijmpistolen |
| Model: | ZLGGS-012 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito ZLGGS-012 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lijmpistolen Ozito
3 Oktober 2022
Handleiding Lijmpistolen
Nieuwste handleidingen voor Lijmpistolen
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022