Ozito TSB-0808 Handleiding

Ozito Zaagmachine TSB-0808

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito TSB-0808 (6 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

TABLE SAW

200mm 800W

INSTRUCTION MANUAL

SPECIFICATIONS

Motor: 800W (S2 10min)

Input: 230-240V ~ 50Hz

No Load Speed: 2,950/min

Blade: Ø Ø200mm x 16 x 2.4mm

Blade Teeth 24TCT

Depth of Cut: 43mm @ 90°

32mm @ 45°

Bevel Angle: 0-45 left°

Table Size: 500x335mm

Dust Port: 36mmØ

Weight: 10.65kg

TSB-0808

WHAT’S IN THE BOX

Push Stick

Mitre Guide

Table Saw

Rip Fence

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase and is intended for DIY (Do It

Yourself) use only. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: blade,push stick,

spanners & bearings.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ozito.com.au

1217

Spanners

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

1 Rip Fence

2 Mitre Guide

3 Blade Guard

4 Blade Guard Mounting Bolt

5 Saw Blade

6 Push Stick Holder

7 Rip Fence Lock Knob

8 On/Off Safety Switch

9 Bevel Lock Knob

10 Bevel Angle Gauge

11 Saw Table

TABLE SAW

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

WARNING!: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE ASSEMBLY

12 Push Stick 13 Blade Spanners x 2

1 Remove the chip bin

cover by removing the 2

xing screws either side.

3 Remove the outer

ange.

Note: Ensure the mounting

ange is clean and free of

grease prior to tting the

blade.

2 Remove the blade

nut by rotating anti-

clockwise using the

supplied spanners.

4 Fit the blade onto the

spindle, ensuring the

blade direction matches

the directional arrows

on the housing.

5 Ret the outer ange

and blade nut. Tighten

using the supplied

spanners to secure the

blade.

Fitting the Blade

12 13

1 2 3 4 5

7 8 9 10 11

REPLACEMENT BLADES:

You will nd a selection of blades available from the Tool Shop

at Bunnings Warehouse.

If the required saw blade size is not available at Bunnings,

this part can be ordered from the Special Orders Desk at

your local Bunnings Warehouse.

1 Insert the Splitter by

securing in pace with

the 2 xing screws.

Ensure the table saw it set up

on a level work bench or sturdy

table

The base of the saw has

bench mounting holes that

can be used to mount it to a

workbench if desired.

A vacuum can be tted to the

dust extraction port at the

back of the table saw to help

remove dust while operating.

2 Slide the rip fence onto

the table and secure in

the desired position by

tightening both locking

knobs.

Note: The fence can be used

with either the low or high side

facing the blade, depending on

the thickness of the material.

1 To t the rip fence, the 2

locking knobs must rst be

tted.

Place the locking plate

behind the fence tab and

then insert the locking

knob with washer through

the fence tab and into the

locking plate.

The mitre guide can be slid

into the end of the rip fence to

allow for simple 45

0 cuts.

4 Mount the blade guard

onto the top of the

splitter.

2 Fit the splitter loosely

using the 2 screws.

Adjust so that is 3-5mm

away from the blade

then tighten the screws

to secure in position.

Note: The distance between the splitter and saw blade should be

checked each time the blade is changed.

5 Insert the mounting

bolt through the blade

guard and splitter and

then tighten the knob to

secure.

3 Fit the table insert and

secure using the 2

screws.

Fitting the Splitter and Blade Guard Mounting the Table Saw to a Bench

Dust Extraction Port

Rip Fence

Mitre Guide

3 - 5mm

Product specificaties

Merk:	Ozito
Categorie:	Zaagmachine
Model:	TSB-0808

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito TSB-0808 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Ozito

Ozito PXCCSK-4182 Handleiding

23 Augustus 2024

Ozito PXBPCK-1825 Handleiding

23 Augustus 2024

Ozito PXTCSK-2520 Handleiding

23 Augustus 2024

Ozito PXPRSS-018 Handleiding

30 Juli 2024

Ozito PXBPCS-1815 Handleiding

30 Juli 2024

Ozito JSW-6100U Handleiding

9 Juli 2023

Ozito RSW-5200 Handleiding

26 Juni 2023

Ozito JSW-4000U Handleiding

24 Juni 2023

Ozito JSW-8100U Handleiding

20 Juni 2023

Ozito RSW-5200U Handleiding

18 Juni 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Bosch PKS 55 Handleiding

23 November 2024

Shindaiwa 269TS Handleiding

19 November 2024

Shindaiwa 320TS Handleiding

19 November 2024

Shindaiwa 488 Handleiding

19 November 2024

Shindaiwa 352s Handleiding

19 November 2024

Ergotools Pattfield E-PST 800 L Handleiding

19 November 2024

Bavaria By Einhell Bavaria BFS 600 E Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSTL 800 Profi Handleiding

19 November 2024

Proviel STL 800 Handleiding

19 November 2024

Proviel PVBK 40 Handleiding

19 November 2024