Ozito TCS-115 Handleiding
Ozito
Tegelsnijders
TCS-115
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito TCS-115 (10 pagina's) in de categorie Tegelsnijders. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/10
Tile Cutting Saw
Spanners x 2, Rubber
Feet x 4
Diamond Blade
Parallel Fence &
Mitre Guide
Blade Guard
TILE
CUTTING
SAW
500W 115mm
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 500W
Input: 230 – 240V~50Hz
No Load Speed: 5,200min¯1
Blade: Ø115 x Ø22.2mm
Max. Depth Of Cut: 24mm
Table Size: 330 x 360mm
Weight: 5.9 kg
TCS-115
WHAT’S IN THE BOX
ozito.com.au
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
6 7
3. Lift the blade cover out of its notch.
4. Remove the blade nut and outer ange
from the spindle.
5. Place the diamond blade on the
spindle, so that it aligns centrally on
the inner ange. Then place the outer
ange on the spindle.
Note: Ensure that the blades direction of
rotation corresponds to the arrow marked
on the housing.
6. Replace the blade nut. The unit is
supplied with 2 spanners, stop the spindle
from rotating with one spanner while
tightening the blade nut with the other.
8 95
11 12 13
10
8. Remove the knob,
bolt and washer
from the blade
guard.
9. Place the blade guard onto the blade guard bracket. Secure it
in place with bolt, washer and knob. Tighten knob sufî‚¿ciently
as to allow the blade guard to rest on the table but lift when the
workpiece is pushed into the diamond blade.
4. While holding the blade guard
bracket upwards and in position,
fasten it to the table top with the
screw and washer.
Note: Ensure the blade guard bracket
aligned to the centre of the diamond
blade.
Product specificaties
| Merk: | Ozito |
| Categorie: | Tegelsnijders |
| Model: | TCS-115 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito TCS-115 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Tegelsnijders Ozito
4 Oktober 2022
Handleiding Tegelsnijders
Nieuwste handleidingen voor Tegelsnijders
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022