Ozito RTB-003 Handleiding

Ozito Zaagmachine RTB-003

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito RTB-003 (9 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/9
ROUTER
TABLE
855 x 335MM
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 220-240V~ 50Hz
Main Table: 455 x 335mm
Table with Extensions: 855 x 335mm
Router Max. Power: 1800W
Router Bit Max.: 22mmØ
Router Max. Weight: 3.5kg
Table Inserts: 13mm (1/2”)Ø
Ø19mm (3/4”)
Ø25mm (1”)
Ø32mm (1-1/4”)
Ø38mm (1-1/2”)
Weight: 7.0kg
RTB-003
WHAT’S IN THE BOX
Router Table
Switch Box, Feather
Boards x 3
Table Inserts x 5
Mitre Gauge & Table
Extensions
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0617
Bolts, Knobs, Nuts &
Washers
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Fence
2. Table Extension
3. Mitre Gauge
4. Feather Board
5. Switch Box Outlet
6. On/Off Switch
7. Guard
8. Dust Port
9. Leg
10. Table
ROUTER TABLE
KNOW YOUR PRODUCT
1. ASSEMBLY
Attaching the legs and table extensions.
3. Place table leg as
shown. Loosely x
in position using four
screws and ange lock
nuts, do not fully tighten
yet.
6. Repeat steps 2 to 5 for the other table extension and table legs.
Once all four legs are securely tightened, turn assembly over
and check the router table does not rock.
SETUP & PREPARATION
The router table must be fully assembled before use.
2. With the table and
one table extension
upside down on a at
surface, align the table
extensions as shown.
Once aligned, slide
the table and table
extension together.
NOTE: The table leg ts inside
the table prole, with xing
screws inserted from the outside.
1. Use 16, 18mm Phillips head
assembly fasteners as
shown.
4. Repeat step 3 above for opposite table leg.
5. Once both table legs are loosely tted, ensure the table and
table extension are lying perfectly at, gently tighten all screws,
working from the centre to the outside.
Insert router mounting bolts
1. Use 4, 50mm Coach bolts, router clamps and assembly
fasteners as shown.
2. Insert four 50mm
coach bolts into the
holes as shown from
the top of the table.
3. From the underside,
loosely t bracket,
washer and ange nut
as shown. Do this for
all four bolts.
ACCESSORIES
11. Table Inserts x 5
2. With the router table on its
legs, align the 2 screw holes
in the switch box with the
corresponding holes in the
table.
Attaching Fence
Attaching Fence Feather Boards
1. Use 2, 40mm Hex head bolts, washer and locking knob
assembly fasteners as shown.
2. Insert the bolts from the
underside of the table
through the holes marked.
3. Place the fence on the bolts and secure in position with washer
and locking knob.
1. Use 4, 40mm Coach bolts, washer and wing nut assembly
fasteners as shown.
2. Fit the fence feather boards to the front of the fence as shown.
NOTE: Pay attention to
the feed direction.
Attaching Table Feather Board
1. Use 2, 30mm Hex head bolts, washer, locking knobs and spacer
assembly fasteners as shown.
2. Insert the two hex head bolts
from the underside of the
table, place spacers on the
bolts ensuring the correct
orientation.
3. Place the feather board on
top, place washer on each
bolt and secure with locking
knobs.
Attaching Switch Box.
1. Use 2, 18mm Phillips head
assembly fasteners as
shown.
x
3. Using screws from the front of
the table secured with ange
lock nuts.

Product specificaties

Merk: Ozito
Categorie: Zaagmachine
Model: RTB-003

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito RTB-003 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Ozito

Ozito

Ozito PXCCSK-4182 Handleiding

23 Augustus 2024
Ozito

Ozito PXBPCK-1825 Handleiding

23 Augustus 2024
Ozito

Ozito PXTCSK-2520 Handleiding

23 Augustus 2024
Ozito

Ozito PXPRSS-018 Handleiding

30 Juli 2024
Ozito

Ozito PXBPCS-1815 Handleiding

30 Juli 2024
Ozito

Ozito JSW-6100U Handleiding

9 Juli 2023
Ozito

Ozito RSW-5200 Handleiding

26 Juni 2023
Ozito

Ozito JSW-4000U Handleiding

24 Juni 2023
Ozito

Ozito JSW-8100U Handleiding

20 Juni 2023
Ozito

Ozito RSW-5200U Handleiding

18 Juni 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Herkules

Herkules KS 210 Profi Handleiding

17 December 2024
Total

Total TS730301 Handleiding

16 December 2024
Total

Total TJSLI8501 Handleiding

16 December 2024
Turbo-Silent

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024
Bavaria

Bavaria BJS 400 Handleiding

5 December 2024
Bavaria

Bavaria BCS 64/1 Handleiding

5 December 2024
Bavaria

Bavaria BEC 2040 TC Handleiding

5 December 2024
Einhell

Einhell RT-SB 250 U Handleiding

4 December 2024
Einhell

Einhell NSMS 4300 ZZ Handleiding

4 December 2024
Einhell

Einhell RT-TS 2231 UD Handleiding

4 December 2024