Ozito PXCGTK-150 Handleiding

Ozito Grastrimmer PXCGTK-150

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXCGTK-150 (10 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
0818
WARNING
The following actions will result in the warranty being
void.
If the tool has been operated on a supply voltage other
than that specied on the tool.
If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: cutting blades.
CORDLESS GRASS
TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
No Load Speed: 8,500/min
Cutting Diameter: 240mm
Weight: 1.57kg
PXCGTS-018
STANDARD EQUIPMENT
Grass Trimmer
ozito.com.au
Secondary Handle & Blades x 20
Safety Guard
Assembly Screws x 4
Spindle Plate & Screw
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online
manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
Fitting the Safety Guard
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
CORDLESS GRASS TRIMMER
1
10
2
11
34
5
6
7
8
9
1. Handle
2. On/Off Trigger
3. Secondary Handle
4. Battery Seating
5. Safety Guard
6. Blade Mount
7. Spindle Plate
8. Cutting Blade
9. Motor housing
ACCESSORIES
10. Blades x 20 11. Assembly Screws x 4
Housing Assembly
1. Align the three parts of the
housing, and insert as far as
possible.
“CLICK”
2. Secure the three parts in place on
both sides with the four housing
assembly screws provided.
1. Turn the grass trimmer
upside down. Align the tabs
of the safety guard with the
recess in the cutter head.
2. Slide in until it clicks into
place.
Fitting the Secondary Handle
“CLICK”
1. Place the big hole in the blade
onto the blade mount on the
bottom of the spindle plate.
3. To remove the blade push the
blade towards the centre of the
spindle and then slide off.
2. Pull the blade outwards
so that the small hole is
tted into the mount.
Attaching a Blade
1. Place the spindle plate
onto the spindle and
secure in place with the
screw provided.
WARNING! NEVER USE THE GRASS TRIMMER
UNLESS THE SAFETY GUARD IS PROPERLY FITTED.
Fitting the Spindle Plate
1. Align the recess in the
secondary handle with
the housing assembly..
2. Slide in until it clicks into
place.


Product specificaties

Merk: Ozito
Categorie: Grastrimmer
Model: PXCGTK-150

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXCGTK-150 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grastrimmer Ozito

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer