Ozito PXBDS-180 Handleiding
Ozito
Schroef-boormachines
PXBDS-180
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXBDS-180 (6 pagina's) in de categorie Schroef-boormachines. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
STANDARD EQUIPMENT
BRUSHLESS
191715
BRU S H L ES S
191715
PXBDS-180
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Chuck Size: Ø2-13mm Keyless
Chuck Material: Metal
No Load Speed: 0-500 / 0-1,800/min
Torque Settings: 20
Max. Torque: 50Nm
Drilling Capacities: Ø32mm (Timber)
Ø13mm (Metal)
Weight: 1.18kg
ozito.com.au
0321
Brushless 13mm Drill Driver &
Belt Clip
13MM DRILL
DRIVER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
BRUSHLESS
191715
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button.
2. Slide the battery out.
1. Keyless Chuck
2. Torque Adjustment Collar
3. Gear Selector
4. Forward/Reverse Button
5. Variable Speed Trigger
6. LED Light
7. Battery Seating
8. Belt Clip
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
BRUSHLESS 13MM DRILL DRIVER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
SS
1 2
4
6
7
8
5
3
Forward/Reverse Lever
1. To drill or drive screws, push the
forward/reverse button towards
the left of the drill.
2. Push the button towards the
right of the tool to reverse the
rotation.
Variable Speed Trigger
1. Squeeze the variable speed
trigger to start the tool.
Note: The more the variable
speed trigger is depressed, the
faster the drill bit will rotate.
2. Release the trigger to stop drilling.
Adjusting Torque
1. Rotate the torque collar to the
desired setting.
Note: Selecting a higher torque setting will allow the drill to use more
torque to drive the screw in or out. To prevent damaging the screw head,
it is recommended to start at a low torque setting and increase when
necessary.
Speed Control
The gear selector controls the speed of the drill. First gear allows slower
drilling with more torque, while second gear is suitable when less torque
but higher speed is required.
1. Slide the switch forward to
select rst gear.
2. Slide the switch backward to
select second gear.
Installing A Drill Bit
1. Rotate the chuck collar anti-clockwise to open
the chuck.
2. Insert the drill bit, making sure it
is centred in the chuck.
3. Tighten the chuck by turning the chuck collar
clockwise.
4. Pull on the bit to ensure it is
rmly secured.
Removing A Drill Bit
1. Open the chuck by rotating the
chuck collar and remove the drill
bit.
WARNING! DO NOT HANDLE ACCESSORIES
WITHOUT GLOVES AS THEY ARE SHARP & CAN
BECOME HOT AFTER USE, POTENTIALLY CAUSING
INJURY.
2. FITTING ACCESSORIES 3. CONTROLS
OPERATION
191715
191715
BRU
1715
REV
FWD
BRUSHLES
15
191715
1917
2nd Gear1
st Gear
a.
b.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Product specificaties
| Merk: | Ozito |
| Categorie: | Schroef-boormachines |
| Model: | PXBDS-180 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PXBDS-180 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroef-boormachines Ozito
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
Handleiding Schroef-boormachines
- Schroef-boormachines Bosch
- Schroef-boormachines AEG
- Schroef-boormachines Bort
- Schroef-boormachines Elu
- Schroef-boormachines Ferm
- Schroef-boormachines Festool
- Schroef-boormachines Gude
- Schroef-boormachines Hikoki
- Schroef-boormachines Hitachi
- Schroef-boormachines Hyundai
- Schroef-boormachines Luxor
- Schroef-boormachines Makita
- Schroef-boormachines Maktec
- Schroef-boormachines Metabo
- Schroef-boormachines Milwaukee
- Schroef-boormachines Parkside
- Schroef-boormachines Ryobi
- Schroef-boormachines Skil
- Schroef-boormachines Vonroc
- Schroef-boormachines Worx
- Schroef-boormachines Black And Decker
- Schroef-boormachines Ronix
- Schroef-boormachines Cocraft
- Schroef-boormachines Meec Tools
- Schroef-boormachines Tryton
Nieuwste handleidingen voor Schroef-boormachines
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022