Ozito ECS-406A Handleiding

Ozito Zaagmachine ECS-406A

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ECS-406A (8 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
ELECTRIC
CHAINSAW
2200W 406mm
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 2200W
Voltage: 220V – 240V ~ 50Hz
Bar Type: Oregon 406mm (16”)
Chain Pitch: 9.53mm (3/8”)
Sharpening File: 3.96mm (5/32”)
Chain Speed: 15m/s
Oil Feed: Automatic
Oil Tank Capacity: 160ml
Weight: 5.6kg
ECS-406A
WHAT’S IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: guide bar, chain
and included accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0814
Electric Chainsaw
Guide Bar Cover
Guide Bar
Chain
3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Fitting a chain and bar
1. Fully unscrew the side cover
lock by turning it in an anti-
clockwise direction.
2. Remove the side
cover.
3. Fit the chain over the guide bar,
making sure that the cutters are
facing in the direction of rotation.
4. Place the guide bar and chain
in position, ensuring that the
chain is around sprocket wheel
(A). Also ensure that the pin
(B) ts into the central slot in
the guide bar.
5. Pull the guide bar
forward until the
chain is closely
seated. Make sure
that all the drive
links are in the
groove of the bar.
6. Attach the side cover and secure
it with the side cover lock.
Note: Do not fully tighten the side cover lock until after
adjusting the chain tension.
1. Power cord
2. Cord retainer
3. Oil level window
4. Oil tank cap
5. Side cover
6. Chain tensioning dial
7. Side cover lock
8. Guide bar
9. Chain
10. Bucking spikes
11. Chain brake
12. Front handle
13. Lock-off switch
14. On/Off trigger
15. Rear handle
16. Chain bar cover
ELECTRIC CHAINSAW
ACCESSORIES
KNOW YOUR PRODUCT
1. GUIDE BAR & CHAIN
ASSEMBLY
CAUTION! ALWAYS WEAR GLOVES WHEN HANDLING
THE CHAIN AS IT IS VERY SHARP AND CAN CUT YOU
WHEN IT IS NOT MOVING.
1 3
11
16
8
13
9
1514
54
12
6 72
10
A B
WARNING! ENSURE THE CHAINSAW IS TURNED
OFF & DISCONNECTED FROM THE POWER
SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
Tensioning the chain
1. Unscrew the side cover
lock a few turns to ensure it is loose.
2. Adjust the chain tension with the
chain tensioning dial. Rotating the
dial downwards increases the tension
and rotating the dial up decreases the
chain tension.
The tension is correct when the chain
can be pulled 3mm away from the guide
bar when using your nger and thumb.
Do not over-tighten as this will reduce
the life of the chain and guide bar.
3. Tighten the side cover lock.
3. LUBRICATION2. CHAIN TENSION
SETUP & PREPARATION
3mm gap is
the ideal tension
IMPORTANT! THE CHAIN SHOULD BE ADJUSTED
BEFORE FIRST USE, AGAIN AFTER 2 3 MINUTES –
OF OPERATION AND RECHECKED AND ADJUSTED IF
NECESSARY AFTER EACH 30 MINUTES OF USE. TAKE
CARE NOT TO OVER TENSION THE CHAIN.
NOTE: ONLY USE OIL THAT IS EXPRESSLY LABELLED
“CHAIN BAR OIL”.
Filling with oil
1. Place the chainsaw on a at
surface and remove the oil
tank cap.
3. Ret cap and clean any
oil spillage.
4. Always ll the oil tank when the oil
level falls below the minimum mark
on the oil level window.
5. To check the lubricating system,
switch on the chainsaw and hold it
with the guide bar and chain above
some light coloured paper such as
newspaper. A steadily increasing
stain caused by oil spray shows the
lubricating system is working.
Chain bar oil may leak if the tool is
left for long periods. This is normal.
If the tool is to be left unused for an
extended time, drain the oil from
the tool. Rell before use.
2. Fill the tank with chain bar oil,
ensuring that no dirt enters the
tank. The capacity of the chain
oil tank is 160ml.
WARNING! TO PREVENT ACCIDENTAL STARTING,
ENSURE THAT THE CHAINSAW IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE MAKING ANY
ADJUSTMENTS.
WARNING! ALL OF THE CHAIN LINKS MUST LIE
PROPERLY IN THE GROOVE OF THE GUIDE BAR. WARNING! NEVER START WORK UNLESS THE
CHAIN AND BAR ARE LUBRICATED.

Product specificaties

Merk: Ozito
Categorie: Zaagmachine
Model: ECS-406A

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ECS-406A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Ozito

Ozito

Ozito PXCCSK-4182 Handleiding

23 Augustus 2024
Ozito

Ozito PXBPCK-1825 Handleiding

23 Augustus 2024
Ozito

Ozito PXTCSK-2520 Handleiding

23 Augustus 2024
Ozito

Ozito PXPRSS-018 Handleiding

30 Juli 2024
Ozito

Ozito PXBPCS-1815 Handleiding

30 Juli 2024
Ozito

Ozito JSW-6100U Handleiding

9 Juli 2023
Ozito

Ozito RSW-5200 Handleiding

26 Juni 2023
Ozito

Ozito JSW-4000U Handleiding

24 Juni 2023
Ozito

Ozito JSW-8100U Handleiding

20 Juni 2023
Ozito

Ozito RSW-5200U Handleiding

18 Juni 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Anova

Anova E60CS Handleiding

20 December 2024
Silverline

Silverline 447132 Handleiding

19 December 2024
Silverline

Silverline 427644 Handleiding

19 December 2024
Herkules

Herkules KS 210 Profi Handleiding

17 December 2024
Total

Total TS730301 Handleiding

16 December 2024
Total

Total TJSLI8501 Handleiding

16 December 2024
Turbo-Silent

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024
Bavaria

Bavaria BJS 400 Handleiding

5 December 2024
Bavaria

Bavaria BCS 64/1 Handleiding

5 December 2024
Bavaria

Bavaria BEC 2040 TC Handleiding

5 December 2024