Ozito ECS-1835 Handleiding

Ozito Kettingzagen ECS-1835

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ECS-1835 (8 pagina's) in de categorie Kettingzagen. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

ELECTRIC

CHAINSAW

1800W 356mm

INSTRUCTION MANUAL

SPECIFICATIONS

Power: 1800W

Bar Length: 356mm (14”)

Cutting Length Max.: 325mm

Chain Pitch: 9.53mm (3/8”)

Sharpening File: 3.96mm (5/32”)

Chain Speed: 13.5m/s

Oil Feed: Automatic

Oil Tank Capacity: 160ml

Weight: 5.0kg

ECS-1835

WHAT’S IN THE BOX

WARRANTY

ozito.com.au

1217

Electric Chainsaw

Guide Bar Cover

Guide Bar

Chain

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: Guide bar, chain

and included accessories.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the

goods repaired or replaced if the goods fail to be of acceptable

quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

Fitting a chain and bar

1. Fully unscrew the side cover

lock by turning it in an anti-

clockwise direction.

2. Remove the side

cover.

3. Fit the chain over the guide bar,

making sure that the cutters are

facing in the direction of rotation.

4. Place the guide bar and chain

in position, ensuring that the

chain is around sprocket wheel

(A). Also ensure that the pin

(B) ts into the guide bar. If it

does not t, it can be adjusted

slightly with the

chain tensioning

dial. The chain must

not slip off the bar

when you do this.

5. Pull the guide bar

forward until the

chain is closely

seated. Make sure that all the drive links are in the

groove of the bar.

6. Attach the side cover and secure

it with the side cover lock.

NOTE: Do not fully tighten the side cover lock until

after adjusting the chain tension.

1. Power cord

2. Cord retainer

3. Oil level window

4. Oil tank cap

5. Side cover

6. Chain tensioning dial

7. Side cover lock

8. Guide bar

9. Chain

10. Bucking spikes

11. Chain brake

12. Front handle

13. Lock-off switch

14. On/Off trigger

15. Rear handle

16. Chain bar cover

ELECTRIC CHAINSAW

ACCESSORIES

KNOW YOUR PRODUCT

1. GUIDE BAR & CHAIN

ASSEMBLY

CAUTION! ALWAYS WEAR GLOVES WHEN HANDLING

THE CHAIN AS IT IS VERY SHARP AND CAN CUT YOU

WHEN IT IS NOT MOVING.

1 3

1514

6 72

A B

WARNING! ENSURE THE CHAINSAW IS TURNED

OFF & DISCONNECTED FROM THE POWER

SUPPLY BEFORE PERFORMING ANY OF THE

FOLLOWING OPERATIONS.

Tensioning the chain

1. Unscrew the side cover

lock a few turns to ensure it is loose.

2. Adjust the chain tension with the

chain tensioning dial. Rotating the

dial downwards increases the tension

and rotating the dial up decreases the

chain tension.

The tension is correct when the chain

can be pulled 3mm away from the guide

bar when using your nger and thumb.

Do not over-tighten as this will reduce

the life of the chain and guide bar.

3. Tighten the side cover lock.

3. LUBRICATION2. CHAIN TENSION

SETUP & PREPARATION

3mm gap is

the ideal tension

IMPORTANT! THE CHAIN SHOULD BE ADJUSTED

BEFORE FIRST USE, AGAIN AFTER 2 3 MINUTES –

OF OPERATION AND RECHECKED AND ADJUSTED IF

NECESSARY AFTER EACH 30 MINUTES OF USE. TAKE

CARE NOT TO OVER TENSION THE CHAIN.

NOTE: ONLY USE OIL THAT IS EXPRESSLY LABELLED

“CHAIN BAR OIL”.

Filling with oil

1. Place the chainsaw on a at

surface and remove the oil

tank cap.

3. Ret cap and clean any

oil spillage.

4. Always ll the oil tank when the oil

level falls below the minimum mark

on the oil level window.

5. To check the lubricating system,

switch on the chainsaw and hold it

with the guide bar and chain above

some light coloured paper such as

newspaper. A steadily increasing

stain caused by oil spray shows the

lubricating system is working.

Chain bar oil may leak if the tool is

left for long periods. This is normal.

If the tool is to be left unused for an

extended time, drain the oil from

the tool. Rell before use.

2. Fill the tank with chain bar oil,

ensuring that no dirt enters the

tank. The capacity of the chain

oil tank is 160ml.

WARNING! TO PREVENT ACCIDENTAL STARTING,

ENSURE THAT THE CHAINSAW IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE MAKING ANY

ADJUSTMENTS.

WARNING! ALL OF THE CHAIN LINKS MUST LIE

PROPERLY IN THE GROOVE OF THE GUIDE BAR. WARNING! NEVER START WORK UNLESS THE

CHAIN AND BAR ARE LUBRICATED.

Product specificaties

Merk:	Ozito
Categorie:	Kettingzagen
Model:	ECS-1835

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ECS-1835 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Kettingzagen Ozito

Ozito ECS-1835 Handleiding

4 Oktober 2022

Ozito PCS-406B Handleiding

4 Oktober 2022

Handleiding Kettingzagen

Nieuwste handleidingen voor Kettingzagen

Black And Decker GPC1800 Handleiding

4 Oktober 2022

Black And Decker GK1530X Handleiding

4 Oktober 2022

Craftsman CMECS600 Handleiding

4 Oktober 2022

Stihl 018 Handleiding

4 Oktober 2022

Qualcast PCS46Z Handleiding

4 Oktober 2022

Dolmar 114 Handleiding

4 Oktober 2022

Husqvarna 61 Handleiding

4 Oktober 2022

Husqvarna 346XP E-Tech Handleiding

4 Oktober 2022

Dolmar 118 Handleiding

4 Oktober 2022

Makita UC3020A Handleiding

4 Oktober 2022