Ozito CMS-1621 Handleiding
Ozito
Verstekzagen
CMS-1621
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito CMS-1621 (17 pagina's) in de categorie Verstekzagen. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/17
COMPOUND
MITRE SAW
CMS-1621
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
210MM (8¼”)
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 220–240V ~ 50Hz
Motor Power: 1400W (S1);
1600W (S6 40%)
No Load Speed: 5,000/min
Blade: Ø210 x Ø16 x 2.8mm (48T)
Mitre Angle: 0-45° Left & Right
Bevel Angle: 0-45° Left
Max. Cutting Capacities:
Mitre 0° x Bevel 90°: 55 x 120mm
Mitre 45° x Bevel 90°: 55 x 80mm
Mitre 0° x Bevel 45°: 32 x 120mm
Mitre 45° x Bevel 45°: 32 x 80mm
Weight: 7.1kg
ozito.com.au
Compound Mitre Saw
2 x Material Support Bars
2 x Hex Keys & Dust Bag
0821
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
1. Safety Release Lever
2. Carry Handle
3. Retractable Blade Guard
4. On/Off Trigger
5. Cutting Handle
6. Motor
7. Lock Down Pin
8. Bevel lock
9. Material Support Bar
10. Mounting Point
11. Fence
12. Mitre Table
13. Mitre Table Lock
14. Material Clamp
COMPOUND MITRE SAW
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
54
2
1
3
14
13
6
7
8
9101112
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Unpacking
1. Remove foam packaging materials and using the carry handle,
carefully lift the mitre saw from its box and place it on a level
work surface.
2. Release cutting
head from
its transport
position. While
holding the
head of the saw
down release
the lock down
pin.
Dust Bag
1. Squeeze the clamp at the end of the
dust bag, place over the dust extraction
port.
Note: The dust extraction port can block
easily with dust and requires to be
periodically cleaned. For more efficient
operation, empty the dust bag when it is
no more than half full. This allows better
air flow through the bag. Dust bags will not
collect all the saw dust generated by the
mitre saw. For best results a dust extractor
should be used in place of the dust bag.
Material Clamp
Material clamp will assist
securing timber when making
cuts.
The clamp can be mounted on
either the left or right.
Note: Use the locking knobs to
secure the material clamp.
When performing a bevel or compound
cut, the material clamp should be
positioned on the right hand side of the
fence.
HOLD
DOWN
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
Securing The Mitre Saw
The base of the saw has four
mounting holes (1 in each
corner) that can be used to
mount it to a workbench or
mitre saw stand. Use four bolts
(not included) to secure it in
place.
Note: If required, the Mitre Saw
can be mounted onto a 13mm
piece (or thicker) of plywood
which can then be clamped to
the work bench or mitre saw stand. This provides the flexibility to
transport the Mitre Saw to other work areas.
Mitre Angle Adjustments
1. Loosen mitre table lock.
2. Rotate the mitre
table to the desired
mitre angle using
the mitre angle
scale.
Note: The mitre table features positive click stops at 0°, 5°, 10°,
15°, 22.5°, 30°, 35°, 40° and 45° for quick setting of common
mitre angles.
3. Secure the desired table angle by turning the mitre table lock
clockwise.
WARNING! ENSURE THE MITRE TABLE LOCK IS
TIGHT BEFORE MAKING A CUT. FAILURE TO DO SO
MAY RESULT IN THE MITRE TABLE MOVING DURING
OPERATION & CAUSE SERIOUS PERSONAL INJURY.
Material Support Bars
1. Align a material support bar with the
holes in the mitre saw base.
2. Use the provided 5mm hex key to
tighten this in place.
3. Repeat steps 1 & 2 for the other side.
2. SETUP & ADJUSTMENTS
Product specificaties
| Merk: | Ozito |
| Categorie: | Verstekzagen |
| Model: | CMS-1621 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito CMS-1621 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verstekzagen Ozito
3 Oktober 2022
Handleiding Verstekzagen
- Verstekzagen Einhell
- Verstekzagen Elite
- Verstekzagen Parkside
- Verstekzagen Worx
- Verstekzagen Black And Decker
- Verstekzagen Meec Tools
- Verstekzagen Clarke
Nieuwste handleidingen voor Verstekzagen
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022