Ozito ACP-5020K Handleiding
Ozito
Compressors
ACP-5020K
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ACP-5020K (16 pagina's) in de categorie Compressors. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
Air Compressor
50 Piece Kitbox &
Accessories
AIR
COMPRESSOR
50L 2.0HP
INSTRUCTION MANUAL
SPECIFICATIONS
Power supply: 220–240V ~ 50Hz
Motor: 1500W (S3 25%), 2.0HP
Tank Capacity: 50L
No Load Speed: 3,750/min
Max. Pressure: 10bar (145psi)
Max. Flow Rate: 120L/min
Free Air Delivery: 48L/min
IP Rating: IP20
Weight: 23kg
ACP-5020K
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
1118
10m Air Hose
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
0
50
100
150
200
225
Pre-Setup Checks
• Examine the machine for signs of transit damage. If damaged, do
not use, return to place of purchase
• The compressor should be set up near to the user.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms.
• The compressor is designed to be used in dry rooms. It is
prohibited to use the compressor in areas where work is
conducted with sprayed water. Before you use the machine, make
sure that the mains voltage complies with the specications on the
rating plate.
Attaching The Support Feet
1. With the pressure tank on its
side, insert a support feet bolt
through one of the support
feet and then the hole in the
frame of the tank.
Note: The support feet should
go on the front of the tank. The
transport handle is located on
the front end of the tank.
2. Use one of the nyloc nuts to
secure the support foot to the
frame.
3. Repeat the same procedure on the other side of the tank with the
second support foot.
Attaching The Wheels
1. Place a wheel bolt through
the wheel and then secure
this in place with a hex nut.
2. Slide this assembly through
the hole in the wheel bracket
and fasten it in position with a
Nyloc nut.
3. Repeat steps 1 and 2 to t the second wheel on the opposite side
of the tank.
1. Transport Handle
2. Pressure Tank
3. Regulated Pressure Outlet
4. Regulated Pressure Gauge
5. Safety Relief Valve
6. On/O Switch
7. Pressure Regulator
8. Wheels
9. Drain Valve
10. Support Feet
AIR COMPRESSOR
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
11. Air Hose (10m) 12. 50 Piece Kitbox &
Accessories
1
2
3
4
5
6
7
8
12
11
9
10
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Connecting Tools To The Air Hose
1. On the other end of the air
hose, wind pipe seal tape
clockwise around the threads
and attach the female coupler.
2. Attach a male Nitto connector
to the desired air tool.
3. Retract the hood on the
female coupler and insert the
Nitto connector to attach the
tool.
Note: Instructions for the air tool accessories can be found in the
Accessory Manual.
Disconnecting Air Tools
WARNING! ENSURE YOU HAVE A FIRM GRIP ON
THE AIR HOSE WHEN DISCONNECTING IT FROM
THE AIR COMPRESSOR, AS PRESSURISED AIR IN
THE TANK MAY CAUSE IT TO WHIP AROUND AND
INFLICT INJURY OR DAMAGE.
1. To remove an air tool from
the unit, retract the sleeve on
the female Nitto tting and
disconnect the air hose from
the air compressor.
2. Repeat the same procedure with the air tool and air hose.
Connecting The Air Hose to the Compressor
1. Apply pipe seal tape to the
threads to ensure a good
seal. Wind the pipe seal tape
clockwise about ttings.
2. Attach the female Nitto
connector to one end of the
air hose.
3. Pull back the sleeve on the
regulated pressure outlet of
the compressor and insert the
connector attached in step 1.
4. Release the sleeve; the Nitto coupling should click into place.
5. Check that the tting is secure by tugging gently on the connector.
If the hose detaches, repeat steps 2 & 3, pushing the Nitto
connector rmly into the outlet.
2. ACCESSORIES
0
50
100
150
200
225
0
50
100
150
200
225
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Product specificaties
| Merk: | Ozito |
| Categorie: | Compressors |
| Model: | ACP-5020K |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito ACP-5020K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Compressors Ozito
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
Handleiding Compressors
- Compressors DeWalt
- Compressors Airpress
- Compressors Bavaria
- Compressors Bostitch
- Compressors Bruder Mannesmann
- Compressors Defort
- Compressors Easymaxx
- Compressors Einhell
- Compressors Eurotec
- Compressors Ferm
- Compressors Ferrex
- Compressors FlinQ
- Compressors Gamma
- Compressors Granit
- Compressors Greenworks
- Compressors Gude
- Compressors Gude Pro
- Compressors Hitachi
- Compressors Hyundai
- Compressors Kaeser
- Compressors Metabo
- Compressors Movecare
- Compressors Parkside
- Compressors Scheppach
- Compressors Specair
- Compressors Stanley
- Compressors Trotec
- Compressors Vonroc
- Compressors Zipper
- Compressors Outspot
- Compressors Cocraft
- Compressors Draper
- Compressors Bormann
- Compressors Clarke
- Compressors Hamron
- Compressors ACG
- Compressors Aerotec
- Compressors Coltri
- Compressors Probuilder
- Compressors Waldbeck
Nieuwste handleidingen voor Compressors
13 Oktober 2023
13 Oktober 2023
22 September 2023
22 September 2023
22 September 2023
22 September 2023
22 September 2023
22 September 2023
22 September 2023
22 September 2023