OWC Thunderblade V4 Handleiding

OWC Externe harde schijf Thunderblade V4

Lees hieronder de 📖 handleiding in het Nederlandse voor OWC Thunderblade V4 (12 pagina's) in de categorie Externe harde schijf. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

T H U N D E R B L A D E V 4

User Guide

Introduction 1 ............................................................................

1.1 Minimum System Requirements

1.2 Package Contents

1.3 Getting Started

1.4 About This Manual

1.5 Front View

1.6 Rear View

Mac & PC Setup 3 .....................................................................

2.1 Mac Formatting & SoftRAID Information

2.2 PC Formatting Process

Support Resources ............................................................... 10

3.1 Troubleshooting

3.2 About Data Backup

3.3 Contacting Technical Support

CONTENTS

OWC ThunderBlade V4 Table of Contents

OWC ThunderBlade V4 Introduction

1.1 Minimum System Requirements

• Mac: host with Thunderbolt™ 3 port running macOS 10.13 or later

• PC: host with Thunderbolt 3 port running Windows 10 or later

1.2 Package Contents

• OWC ThunderBlade V4

• 0.5m Thunderbolt 3 cable

• Power supply and cable

1.3 Getting Started

• To use the ThunderBlade V4, connect it to your computer via the included

Thunderbolt 3 cable. Device drivers are not required, however use of

SoftRAID XT (macOS only at the time of this writing) requires the SoftRAID

driver and application.

• The LED indicator on the front of the device (see Section 1.5) will glow blue

when the device is receiving power and is connected to an active host.

The LED will glow white when the device is connected to a host that is in

Sleep or hibernation mode, or when it has power but is not connected to a

host. This LED is also connected to a light sensor on the back of the device;

this enables the LED brightness to adjust automatically based on ambient

lighting conditions.

• The LED has four segments, one for each installed M.2 SSD. When

one or more of the SSDs are accessed for read/write operations, the

corresponding segments will blink blue.

• While it is possible to connect a DisplayPort 1.2 display to the spare

Thunderbolt 3 port on the device by using the appropriate cable or adapter,

HDMI and other types of displays require an with a active display adapter

USB-C host connection.

1.4 About This Manual

The images and descriptions may vary slightly between this manual and the unit

shipped. Functions and features may change depending on the rmware version.

Screenshot images may vary slightly from the installed operating system. The latest

product details and warranty information can be found on the product web page.

OWC’s Limited Warranty is not transferable and subject to limitations.

INTRODUCTION

Product specificaties

Merk:	OWC
Categorie:	Externe harde schijf
Model:	Thunderblade V4
Kleur van het product:	Zwart
Gewicht:	700 g
Breedte:	123 mm
Diepte:	192 mm
Hoogte:	30 mm
Gebruikershandleiding:	Ja
Meegeleverde kabels:	AC, Thunderbolt
Ondersteunt Windows:	Windows 10
Temperatuur bij opslag:	-40 - 65 °C
Ondersteunt Mac-besturingssysteem:	Ja
SSD capaciteit:	1000 GB
Opslag schijfgrootte:	- "
Ondersteunde opslagstationinterfaces:	Thunderbolt 3
Leessnelheid:	2800 MB/s
Schrijfsnelheid:	2450 MB/s
Soorten RAID:	0, 1,1+0, 4,5
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Thunderbolt technologie:	Ja
Thunderbolt-versie:	3