Orion OOR-007F Handleiding
Orion
Olieradiator
OOR-007F
Lees hieronder de 📖 handleiding in het Nederlandse voor Orion OOR-007F (5 pagina's) in de categorie Olieradiator. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/5
http://www.orion.ua
I
IN
NS
ST
TR
RU
UC
CT
TI
IO
ON
NM
MA
AN
NU
UA
AL
L
OIL RADIATOR
Model:
OOR-007F (7 fins)
OOR-009F (9 fins)
OOR-011F (11 fins)
ENGLISH GB
http://www.orion.ua2
DEAR CUSTOMERS!
MANY THANKS FOR BUYING ORION OIL RADIATOR!
We really believe you will get the greatest pleasure from using this device for the years!
Please, read the user’s guide in detail before first using of this oil radiator.
CAUTION
1. Read and save this instruction manual for further reading.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
3. Children should be supervised to ensure that they do not play with the appliance.
4. The product is for household use only.
5. Connect the appliance to single phase AC supply of the voltage specified on the rating
plate.
6. In order to avoid overheating, do not cover the heater.
7. Never leave the heater unattended while it is in use. Always turn the product to the OFF
position and unplug it from the electrical outlet when not in use.
8. Extreme caution is necessary when any heater is used by or near children, invalids or
elderly person and whenever the heater is left operating and unattended.
9. Do not run cord under carpeting and do not cover cord with throw rugs, runners or the like.
Arrange cord away from traffic area and where it will not be tripped over.
10. Do not operate the heater with a damaged cord or plug, or after the heater malfunctions,
has been dropped, or damaged in any manner. If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent or a similarly qualified person to avoid a
hazard.
11. Avoid the use of an extension cord as this may overheat and cause a risk of fire.
12. Use the heater in a well-ventilated area. Do not insert or allow objects to enter any
ventilation or exhaust opening. To prevent a possible fire, do not block air intakes or
exhaust openings in any manner. Do not use on soft surfaces, like a bed, where openings
may become blocked. Use the heater on flat, dry surfaces only.
13. Do not place this heater near flammable materials, surfaces or substances, as there may
be a risk of fire. Keep the above flammable materials, surfaces or substances at least 1m
from the front of the product and keep them away from the sides and rear.
14. Do not use the heater in any areas where petrol, paint or other flammable liquids are stored
e.g. Garages or workshops as a hot, arcing or sparking parts inside the heater.
15. Don’t use this heater in the immediate surroundings of a bath, a shower or a swimming
pool. Never locate the heater where it may fall into bathtub or other water container.
16. This heater is hot when in use. To avoid burns and personal injury, do not let bare skin
touch hot surfaces. If provided, use handles when moving the product.
17. Be sure that no other appliances are in use on the same electrical circuit as your product as
an overload can occur.
18. This heater is filled with a precise quantity of special oil.
19. Repair requiring opening of the oil container are only to be made by the manufacturer or his
service agent who should be contacted if there is an oil leakage.
20. Regulations concerning the disposal of oil when scrapping the appliance have to be
followed.
21. The heater should not be used in a room, of which the floor area is less than 5 M 2.
22. The cord shouldn’t be placed nearby the hot surface of the appliance.
http://www.orion.ua3
PARTS DESCRIPTION
ASSEMBLY
The heater is packaged with the feet unattached. You must attach them before operating the
heater.
WARNING: Do not operate without feet attached. Do operate the heater only in upright
position (feet on the bottom, controls on the top), any other position could create a
hazardous situation.
1. Turn the heater upside down.
2. Position the wheel base assemblies between the end fins.
3. Attach them to the heater using the U-bolts and wing nuts supplied.
4. Tighten the wing nuts.
5. Turn the heater the right way up.
USE OF FAN HEATER
If you want to fasten the speed of heating efficiency when you turn on the unit power, you can
just push the fan heater switch “ON”, the room temperature will be raised in high speed. Push
the fan heater switch ”OFF”, the fan heater power will be off immediately.
1. Carry handle
2. Thermostat knob
3. Power switch
4. Fan switch
5. Cord storage
6. Radiant fins
7. Castor
3
1
2
4
5 7
6
Product specificaties
| Merk: | Orion |
| Categorie: | Olieradiator |
| Model: | OOR-007F |
Heb je hulp nodig?
Als je hulp nodig hebt met Orion OOR-007F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Olieradiator Orion
9 September 2023
9 September 2023
9 September 2023
9 September 2023
9 September 2023
9 September 2023
9 September 2023
Handleiding Olieradiator
- Olieradiator Honeywell
- Olieradiator Zibro
- Olieradiator Bionaire
- Olieradiator Dimplex
- Olieradiator Eurom
- Olieradiator Migros
- Olieradiator Mill
- Olieradiator Profile
- Olieradiator Profiline Yellow
- Olieradiator Solac
- Olieradiator Sonnenkonig
- Olieradiator Suntec
- Olieradiator Toolland
- Olieradiator Waves
- Olieradiator Day
Nieuwste handleidingen voor Olieradiator
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023
3 September 2023
3 September 2023
3 September 2023
3 September 2023
26 November 2022
1 Augustus 2023
22 April 2023